COMPONENTS
The range of Immergas accessories for boilers and water heaters ensures ease of installation, all types of programming and remote control.
Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).
For buildings not equipped with telephone network. Available for all Immergas models.
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
To match VICTRIX SUPERIOR 35 PLUS in cascade
Electric interface Gas boiler-Cascade and zones regulator kit; it is necessary one interface each gas boiler.
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
Ideal for reading the room temperature of second or third zone.
To be matched to sensor receiver code 3.030908.
Product class V* or VI
Seasonal energy efficiency value 3%* or 4%
*as standard
Product class V* or VI
Seasonal energy efficiency value 3%* or 4%
*as standard
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
It allows the covering of the wall hole for electrical boxes type 503.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
For generators settled up with low temperature
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
For buildings equipped with telephone network. Available for all Immergas models.
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
Temperature control class V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.
only for system controller
To be used with radiant systems that also work in cooling mode
Temperature control class V or VI*
Contribution to seasonal space heating energy efficiency
3% or 4%*
* default settings
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
To be used with radiant systems that also work in cooling mode.
speed on 4 steps.
temperature adjustment using 4 types of programs:
Auto, Silent, Night and Max.
Dedicated to MAGIS COMBO PLUS V2 in recessed solutions, MAGIS PRO V2, TRIO PACK, TRIO HYDRO, DIM 2/3 ZONE ErP or to kit code no. 3.021527 and 3.021528 (to be installed on the delivery manifold), HERCULES CONDENSING and HERCULES SOLAR
only for system controller
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
La centralina solare è completa di sonde temperatura per Collettore e Unità Bollitore. Display retroilluminato.
Può essere integrata nelle Unità Bollitore UB INOX 120 V2 e UB INOX 200 V2.
Zone manager kit Code 3.015264
To be used when external probe as standard in outdoor unit is not correctly exposed.
Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%
* default settings
Composed by:
• HSCP viewer/programmer
• BCM board
• 24V power supply
• external probe
• puffer probe
Positioned on the delivery pipe, after the hydraulic separator, it allows the cascade and zone regulator to control system temperature as well as that of any mixed zones.
If the cascade and zone regolator is not install inside an electrical box.
Modulating room thermostat Code 3.015245
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
This is a modulating control unit that serves to optimize climatic management of the temperature in rooms. It can only be used on systems with a single temperature control.
N.B. 1 multifunction kit (not connected) is supplied as standard with the boiler.
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.
Connected to the cascade and zone regulator, it optimizes energy consumption by correcting the delivery temperature to the system for smooth temperature function
Flexible duct kit Ø 80 12m with spacers Code 3.027875
L=12 m + 4 centering spacers.
For condensing boilers.
Chimney hole closing panel Code 3.012008
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Vertical outlet kit Ø 80/125 for flexible ducting Ø 80 Code 3.027876
For condensing boilers.
Clapet kit for for collective flue systems operating under positive pressure Code 3.031599
for VICTRIX ZEUS SUPERIOR and VICTRIX SUPERIOR
Extension pipe kit Ø 60/100 0,5 m long Code 3.014643
For condensing boiler < 35 kW.
Anti-wind vertical terminal kit Ø 80 Code 3.021721
For condensign boiler < 35 kW.
Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge Code 3.016365
For condensing boilers < 35 kW.
Twin pipes complete kit Ø 80/80 Code 3.012002
For condensing boiler < 35 kW.
90° bend Ø 60 for ducting system Code 3.013870
For condensing boilers < 35 kW.
Terminal vertical outlet kit Ø 80 Code 3.015256
For condensing boiler < 35 kW.
Extension pipe kit Ø 80/125 1 m long Code 3.018667
Support bend kit Ø 80 70° M and flexible ducting adapter Ø 80 Code 3.027874
For condensing boilers.
Flanged stub-pipe kit Ø 60/100 Code 3.012086
For condensing boiler < 35 kW.
Ø 80 "T-shaped" terminal kit Ø 80 (C5) for flexible ducting system Code 3.027356
Flexible chimney ducting system for condensing boilers.
45° bend Ø 60/100 kit Code 3.012095
For condensing boiler < 35 kW.
Support bend kit Ø 80 87° and flexible ducting adapter Ø 80 Code 3.027873
For condensing boilers.
90° bend Ø 60/100 kit Code 3.012093
For condensing boiler < 35 kW.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
Extension pipe kit Ø 60/100 1 m long Code 3.012089
For condensing boiler < 35 kW.
Pipe clamp kit for ducting system Ø 60 Code 3.012145
For condensing boilers < 35 kW.
For external installations, in partially protected places
4 extension pipes Ø 80 kit 0,5 m long Code 3.014642
For condensing boilers < 35 kW.
4 extension pipes Ø 80 kit 1 m long Code 3.012088
For condensing boilers < 35 kW.
Ø 125 adapter kit for C9 ducting system Code 3.022033
Components support kit Ø 50 mm for flexible ducting system Code 3.027355
Flexible chimney ducting system for condensing boilers.
Flanged stub-pipe kit Ø 80 Code 3.012087
For condensing boilers < 35 kW.
Flanged stub-pipe Ø 80 for flue discharge Code 3.016364
For condensing boilers < 35 kW.
Vertical outlet kit for ducting system Ø 60 Code 3.012112
For condensign boilers < 35 kW.
2 x 45° Bend kit Ø 80/125 Code 3.015248
Per installazione a camera stagna e tiraggio forzato (tipo C).
Per VICTRIX PRO ErP e ARES CONDENSING 50/115 ErP.
Flange Ø 60/100 coupling Ø 80/125 adapter kit Code 3.022990
To be used with the concentric kits.
For condensing boiler < 35 kW.
Ø 100 adapter kit for C9 ducting system Code 3.022032
87° Bend kit Ø 80/125 Code 3.015247
Per installazione a camera stagna e tiraggio forzato (tipo C).
Per VICTRIX PRO ErP e ARES CONDENSING 50/115 ErP.
Horizontal outlet terminal Ø 80 Code 3.016363
For condensing boiler < 35 kW.
Push-fitting extension pipes kit 1 m for ducting system Ø 60 Code 3.012144
4 x 90° bends Ø 80 kit Code 3.012091
For condensing boilers < 35 kW.
45° bend Ø 80 kit Code 3.012092
For condensing boilers < 35 kW.
Flexible hose kit Ø 50 mm L. 10 m Code 3.027354
Flexible chimney ducting system for condensing boilers.
For external installations, in partially protected places
Push-fitting extension pipes kit 2 m for ducting system Ø 60 Code 3.013869
Push-fitting extension pipes kit 1 m for ducting system Ø 60 Code 3.012144
1 extension pipe Ø 80 2 m long Code 3.016837
For condensing boilers < 35 kW.
Flexible/flexible adapter kit for flexible ducting Ø 80 Code 3.027877
For flexible ducting system, Ø 80.
For condensing boilers.
90° bend terminal kit Ø 50 (C5) for flexible ducting system Code 3.027357
Flexible chimney ducting system for condensing boilers.
Extension pipe kit Ø 80/125 2 m long Code 3.015246
Flexible/flexible adapter kit for flexible ducting system Ø 50 Code 3.027359
Flexible chimney ducting system for condensing boilers.
Vertical terminal kit Ø 80/125 for flexible ducting system Ø 50 (C5+C9) Code 3.027358
Flexible chimney ducting system for condensing boilers.
Support bend kit for ducting system Ø 60 Code 3.012153
For condensing boilers < 35 kW.
Horizontal concentric kit Ø 80/125 Code 3.030782
for VICTRIX PRO 35-55-68-80 ErP.
Hanging bracket kit Code 3.011600
Adjustable support chimney hanging bracket, for ducting system.
For traditional and condensing boilers < 35 kW.
HERCULES Condensing B22 - B23 terminal kit Code 3.020004
Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.
Spacer pipe clamp kit for ducting system Ø 60 Code 3.012146
For condensing boilers < 35 kW.
Concentric horizontal outlet Ø 60/100 Code 3.016836
for condensing boilers < 35 kW.
45° bend Ø 80/125 CodE 3.010952
For traditional boilers.
Flanged stub-pipes Ø 80 Code 3.011570
For traditional boilers.
Flanged stub-pipe Ø 60/100 vertical outlet Code 3.011141
For traditional boilers.
Insulated twin pipes complete kit Ø 80/80 Code 3.010233
For traditional boilers.
45° bend Ø 80 kit Code 3.010956
For traditional boilers.
Horizontal outlet Ø 60/100 Code 3.011572
For traditional boilers.
Insulated 90° bend Ø 80 kit Code 3.010953
For traditional boilers.
Concentric vertical complete kit Ø 80/125 Code 3.010352
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
Twin pipes complete kit Ø 80/80 Code 3.010351
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
Concentric horizontal complete kit Ø 80/125 Code 3.010526
For traditional boilers.
Concentric vertical outlet Ø 60/100 (red ocher color) Code 3.015631
For traditional boilers.
Vertical flue outlet for twin pipes Ø 80 Code 3.010963
For traditional boilers.
90° bend Ø 80/125 Code 3.010951
For traditional boilers.
1 insulated extension pipe Ø 80 2 m long Code 3.010948
For traditional boilers.
45° bend Ø 60/100 Code 3.010950
For traditional boilers.
Concentric horizontal complete kit Ø 60/100 STAR Code 3.014147
For traditional boilers.
Wind-stop outlet Code 3.011488
For traditional boilers, Ø 80.
For traditional boilers, Ø 80 mm ducting system.
1 extension pipe Ø 80/125 0,5 m long Code 3.011157
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
1 extension pipe Ø 60/100 2 m long Code 3.010739
For traditional boilers.
4 x 90° bend Ø 80 kit Code 3.010955
For traditional boilers.
1 extension pipe Ø 80/125 2 m long Code 3.010946
For traditional boilers.
Insulated 45° bend Ø 80 kit Code 3.010954
For traditional boilers.
1 extension pipe Ø 80/125 1 m long Code 3.010945
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
Flue outlet wind-stop grate Ø 80 Code 3.010962
For traditional boilers.
Female/female stub-pipe Ø 80 Code 3.012714
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers, Ø 80 mm ducting system.
1 insulated extension pipe Ø 80 1 m long Code 3.010947
For traditional boilers.
Adapter Ø 60/100 - 80/125 Code 3.010957
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
4 extension pipes Ø 80 1 m long Code 3.010741
For traditional boilers.
Condense tank kit Ø 80 Code 3.012009
For traditional boilers.
4 extension pipes Ø 80 0,5 m long Code 3.011491
For traditional boilers.
For traditional boilers, Ø 80 mm ducting system.
Condense tank kit Ø 80/125 Code 3.010960
For traditional boilers.
For RAPAX 200/300 V3 and 200/300 SOL V3
for RAPAX 200/300 V3 and 200/300 SOL V3
for RAPAX 200/300 V3 and 200/300 SOL V3
For RAPAX 100 V2
Composed by:
• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm
Exhaust manifold kit 2 VICTRIX PRO 80/100/120 Ø 200 with flue lock Code 3.024281
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
For installations in central heating systems with VICTRIX PRO.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
87° bend Ø 110/160 kit Code 3.031396
for VICTRIX PRO 100-120 ErP.
Exhaust manifold kit Ø160 Code 3.032852
For indoor installation of 2 VICTRIX SUPERIOR 35 PLUS in cascade
45° bend Ø 110/160 kit Code 3.031395
for VICTRIX PRO 100-120 ErP.
For RAPAX 100 V2
Extension pipe kit Ø 110/160 2 m long Code 3.031398
for VICTRIX PRO 100-120 ErP.
For RAPAX 100 V2.
For RAPAX 100 V2.
Horizontal kit Ø 80 (to discharge in the chimney) Code 3.015254
For VICTRIX PRO.
Terminal vertical outlet outdoor kit Ø 80 Code 3.024295
For VICTRIX PRO.
45° bend Ø 110/160 kit Code 3.031395
for VICTRIX PRO 100-120 ErP.
For RAPAX 200/300 V3 and 200/300 SOL V3
For indoor installation of VICTRIX SUPERIOR 35 PLUS in cascade
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Flashing Kit Ø 80/125 for flat roof Code 3.015249
Per installazione a camera stagna e tiraggio forzato (tipo C).
Per VICTRIX PRO ErP e ARES CONDENSING 50/115 ErP.
For installations in central heating systems with VICTRIX PRO.
Exhaust manifold kit 2 VICTRIX PRO 35/55 Ø 160 with flue lock Code 3.024279
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Extension pipe kit Ø 110/160 1 m long Code 3.031397
for VICTRIX PRO 100-120 ErP.
Horizontal concentric kit Ø 110/160 Code 3.031393
for VICTRIX PRO 100-120 ErP.
For installations in central heating systems with VICTRIX PRO.
Terminal horizontal outlet kit Ø 80 (to discharge horizontally) Code 3.015255
For VICTRIX PRO.
Per protezione antigelo fino a -15°C.
Per CAESAR 14 ErP e SUPER CAESAR 17 ErP.
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 85 °C.
Equipped with thermometer
For MAGIS PRO 12-14-16 V2 and MAGIS COMBO/PLUS 12-14-16 V2
Modulating low consumption pumps.
For VICTRIX SUPERIOR.
Modulating low consumption pumps.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
to be installed for central heating systems with MAGIS PRO ErP in stand-alone configuration (kit to be placed inside hydronic unit).
230 or 400 Vac power supply required.
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
For TRIO PACK ELECTRIC-TRIO HYDRO system ELECTRIC.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
Always add the fixing element kit code 3.022922.
from the terminal, towards the nozzle placed at right angles to the air outlet.
90° bended duct for HYDRO IN 200 Code 3.029856
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
from the terminal, towards the nozzle placed at right angles to the air outlet.
from the terminal, towards the nozzle placed at right angles to the air outlet.
Power supply 230 or 400 Vac.
Composed by 1 low consumption pump, mixing valve and hydraulic connections.
Power supply 230 or 400 Vac.
Modulating low consumption pump.
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated
Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.
from the terminal, towards the nozzle placed at right angles to the air outlet.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Suitable to replace obsolete appliances
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Usable in outdoor installations for minimum temperature as low as -15 °C.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per AVIO 24 ErP.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES SOLAR 200 CONDENSING.
Installabile all'interno di MAGIS HERCULES ErP.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.
To be installed inside the casing.
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
DIMV2 TOP 2 ZONE
DIM V2 TOP 2 ZONECARV2 (Comando Amico Remoto modulante)DIM V2 TOP 2 ZONE
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per scaldabagni.
(for external temperatures from 0 °C to -13 °C).
For SOLARSMART.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Aestethics frame (250 mm height, 407 mm depth) that covers connections zone and the main option kits
Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT
for VICTRIX SUPERIOR
For VICTRIX ZEUS 25-32.
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
To be used to manage the recirculation pump.
For MAGIS M and external unit of MAGIS HERCULES PRO 4 - 6 , MAGIS PRO/COMBO 4 - 6 V2,
TRIO PACK 4 - 6 and TRIO HYDRO 5
For wall-hung boilers: compact condensate drain pump kit.
For floor standing boilers: compact condensate drain pump kit.
With grains.
Inclusive of granulate.
for MAGIS HERCULES PRO 4-6-9
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
for MAGIS HERCULES PRO 12-14-16
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
Arrangement box recessed for pipes is needed.
for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
in the case of pipes coming out from the wall on the
internal unit
For connection R32 toward the lower part of the Container
Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.
For the installation of heating only boilers.
including fittings, 4 shut-off knobs and predisposition to
insert the “Y” filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y” filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y” filters for zone 1 and 2
For MAGIS M4 and 6
For MAGIS M8/12/14/16/18/22/26/30
For CAESAR EXTRA.
Per funzionamento in luoghi parzialmente protetti.
Per CAESAR 14 ErP.
Per funzionamento in luoghi parzialmente protetti.
Per SUPER CAESAR 17 ErP.
Per configurazione tipo "B23".
Per funzionamento in luoghi parzialmente protetti.
Per VICTRIX EXA.
Per configurazione tipo "B23".
Per funzionamento in luoghi parzialmente protetti.
Per VICTRIX TT ErP e VICTRIX MAIOR TT/TT PLUS.
For external installations, in partially protected places
For partially protected area installation
- Instructions and warning book
Hydraulic manifold, 2 low-consumption pumps and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
Hydraulic manifold and 1 low-consumption pump.
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
Kit to be used without system manager controller. Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Wall-hung or recessed installation. Low consumption pumps.
Wall-hung or recessed installation. Low consumption pumps.
The kit includes: collector side fixing brackets and 1 intermediate bracket.
Per scaldabagni JULIUS.
Complete recharge for condensate neutralizer kit (cod. 3.023662).
• DHW storage tank in stainless steel with double
coil 160 litres of capacity (class C)
• hydraulic distribution unit for one zone that
includes: hydraulic manifold, 1 low consumption
pump, DHW expansion vessel 8 litres, safety valve 8
bar and thermostatic mixing valve.
All components are insulated
Suitable to install it under external unit it is necessary adapter kit code 3.030915
For 2 VICTRIX SUPERIOR 35 PLUS in cascade
2,7 bar safety valve included
To install inside the cabinet kit.
Insulation as standard.
Insulation as standard.
To be mainly used when the pump is independently dimensioned by the designer.
To be mainly used when the pump is independently dimensioned by the designer.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
3 kW - Integration electric heater kit fo MAGIS HERCULES PRO Code 3.030899
For internal installation
Modulating low consumption pump.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for TRIO V2 - COMBI and PLUS SYSTEM
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
To consider in addition to extra pellet tank.
To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.
Setted at 6 bar and 94 °C.
For SOLARSMART.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Recirculation kit Code 3.020001
Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
It's possible install this kit inside MAGIS HERCULES.
To be installed inside the MAGIS HERCULES PRO internal unit casing
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Recessed frame for solutions MAGIS COMBO PLUS.
is the first of the main components of MAGIS COMBO PLUS with SOLAR CONTAINER COMBO solutions.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 430
Connection ¾”. Including safety and exhaust valves with
4,5 ± 0,5 bar setting; check valve; cutoff cock and drain trap.
For SOLARSMART.
Insulation as standard.
Insulation as standard.
It can be fixed into wall thanks to brackets (as standard).
It can be fixed into wall thanks to brackets (as standard).
For wall-hung outdoor boilers.
Shut off knobs 1" connections (for zones 2 and 3 only) for MAGIS HERCULES PRO Code 3.030860
Shut off knobs, 1" connections (for zones 2 and 3 only).
For wall-hung boilers and MAGIS VICTRIX ErP.
Shut off knobs with filters
1" connections (for zones 2 and 3, only); standard for zone 1.
For HERCULES SOLAR 26 ErP
For alignment of solar circuit in template.
Installabile all'interno di MAGIS HERCULES ErP.
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
For MAGIS HERCULES PRO.
Composed by: plate heat exchanger, single solar pump
station (with low consumption circulation pump), solar
central unit, connection pipes,18 litre solar expansion vessel,
temperature probes (for collectors and storage tank).
N.B.: For solar panel and other solar accessories see the
solar catalogue.
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)
Including pipes and fittings for connection in template.
It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.
Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.
For the storage tank unit managed as a zone (with a circulator) and connected to the cascade regulator (without external 3-way valve). For solar installations managed with cascade and zone regulator two probes are necessary.
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
Floor-standing cabinet, it can be installed outdoor.
For wall-hung condensing boilers.
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 90 °C.
