THERMOREGULATION
FLUE SYSTEMS
OPTIONS
 
Hybrid Systems
Heat Pumps
Thermal Solar System
Solar System Ready
Light Commercial
Condensing Boilers
Traditional Boilers
Pellet boilers
Fancoil Units
Complete range
Split solutions
Recessed or in-house solutions
Wall-hung
Floor-standing
Complete range
Split mono-phase
Mono-phase
Three-phase
Complete range
Individual components
Complete range
Floor-standing
Complete range
Wall-hung
Floor-standing
Modular thermal block
Counter units
Complete range
Top Tech wall-hung
Hi-Tech wall-hung
Wall-hung
Wall-hung and floor-standing with built-in storage tank
Complete range
Wall-hung
Wall-hung for outdoor installation
Wall-hung with built-in storage tank
Complete range
With-in pellet tank
Complete range
Recessed solutions
Solar probe kit       Code 3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO
 
GSM telephonic control       Code 3.017182

For buildings not equipped with telephone network. Available for all Immergas models.

DOMINUS interface kit       Code 3.026273
To control heat pumps, system or gas boilers and display operation data on your tablet, smartphone and portable PC.
Using DOMINUS interface kit, installed before your modem/router wireless (not supplied by Immergas), you
can communicate with the heat pump’s circuit board from any location.
Control box for pumps and zone       Code 3.011668
Maximum three zones.
Available for all models except VICTRIX TERA VIP, VICTRIX TERA/X, MYTHOS HP. NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
Storage tank NTC probe       Code 3.019375

Allows to check the DHW temperature of a commercial Storage Tank Unit with the Immergas boiler <35 kW.
Provided as per standard on all Storage Tank Units in the catalogue.

Electrical box cover plate kit for SMARTECH PLUS       Code 3.031013

It allows the covering of the wall hole for electrical boxes type 503.

CARV2 (weekly chronothermostat and modulating remote control)       Code 3.021395

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Relay board kit       Code 3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
 
To be installed inside internal unit both in MAGIS COMBO and MAGIS PRO ERP or V2
Multi-zone electronic board        Code 3.028444

It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).

For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.

Low temperature safety kit     Code 3.013794

for DIM 2/3 zone ErP, kit code 3.021527 and code 3.021528.

 

 

CARV2 WIRELESS (radio wave weekly chronothermostat and modulating remote control)       Code 3.021623
Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Relay board kit       Code 3.017331
Allows interface between zone valves and CAR or Super CAR.
Available for VICTRIX Zeus only.
Low temperature safety kit      Code 3.019229

For generators settled up with low temperature

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)       Code 3.021624

Class of device IV* or VII

Contribution to the environmental heating energy efficiency 2%* or 3,5%

* default settings

MINI CRD (MINI weekly chronothermostat and modulating remote control)       Code 3.020167
Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

CRONO 7 (weekly digital chronothermostat)       Code 3.021622

Class of device IV* or VII

Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%

* default settings

Telephonic control       Code 3.013305

For buildings equipped with telephone network. Available for all Immergas models.

Super CAR (weekly thermostat and modulating remote control)       Code 3.016577
Available for: All Superior models and VICTRIX Zeus, HERCULES, ZEUS kW, AVIO kW, NIKE Mini 28 kW Special.

Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

External probe       Code 3.014083
Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
 

Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%

* as standard

Safety thermostat kit       Code 3.019869

For HERCULES Condensing and HERCULES Solar.

Room thermostat       Code 3.012287
Simple thermostat for the manual regulation of the temperature. Available for all models.
Expansion kit for SMARTECH PLUS       Code 3.030911

For controlling the temperature in several areas of the house (example living and sleeping areas).

The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).

 

SMARTECH PLUS - SMART remote control       Code 3.030909

Hi-tech smart wireless remote control with Bluetooth technology

The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20


Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%

 

*default settings.

2 relays board kit       Code 3.026302

To be installed for the deumidifiers management without in absence of system manager kit.

Dedicated to MAGIS PRO ErP and MAGIS COMBO.

 

 

Remote Control Panel       Code 3.030863
For MAGIS PRO V2
 
Modulating remote control only for V2 versions

Temperature control class V* or VI
Contribution to seasonal space heating energy efficiency
3%* or 4%
 
* default settings
On board electronic control with PID full modulating fan  Code 3.030876

To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.

Smart touch wall controller with temperature probe (black casing)      Code 3.030877
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
System controller       Code 3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
 
* as standard
Zone controller       Code 3.021523
Room hygrostat       Code 3.023302

To be used with radiant systems that also work in cooling mode.

4 speeds thermoregulation kit     Code 3.028510
includes control panel and probe NTC air.
For installation on the machine, with adjustment
speed on 4 steps.
 
Smart touch wall controller with temperature probe (white casing)      Code 3.030878
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
 
 
Modulating thermoregulation kit     Code 3.028509
includes control panel with display, electronic board and NTC air probe.
For installation on the machine, allows the room
temperature adjustment using 4 types of programs:
Auto, Silent, Night and Max.
Remote control kit       Code 3.023364
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
 
* as standard
System controller expansion kit       Code 3.021547

 

 

EMR 12 VDC relay kit       Code 3.023945

only for system controller

Electronic control board with 0-10 V connection    Code 3.028512
It allows to manage the fan motor, with modulating speed.
 
SSR 6 VDC relay kit       Code 3.023946

only for system controller

Universal control board for commercial thermoregulation    Code 3.028511
For installation on the machine, allows to manage the fan motor, with fixed speeds.
 
Temperature/humidity active sensor kit for MAGIS PRO V2       Code 3.030992

To be used with radiant systems that also work in
cooling mode only for MAGIS PRO V2 versions.


Temperature control class V or VI*
Contribution to seasonal space heating energy efficiency
3% or 4%*

* default settings

Temperature/humidity active sensor kit       Code 3.021524

To be used with radiant systems that also work in cooling mode.

Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*

* as standard

Solar central unit kit      Code 3.019097

La centralina solare è completa di sonde temperatura per Collettore e Unità Bollitore. Display retroilluminato.
Può essere integrata nelle Unità Bollitore UB INOX 120 V2 e UB INOX 200 V2.

PRO solar central unit      Cod. 3.019519
Advanced central unit, capable of managing special systems (such as two sets of collectors on double-pitched roofs, heating systems integration, heating integration for swimming pools etc.). Supplied as per standard with four probes, to be able to control two different ΔT based on the type of system required.
It is supplied as per standard in combined solar packs for heating and domestic hot water integration.

Zone manager kit       Code 3.015264

Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone, and allow remote control of the cascade and zone regulator.
External probe (for single installation)      Code 3.015266

To be used when external probe as standard in outdoor unit is not correctly exposed.


Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%

* default settings

Tele-management kit 2.0       Code 3.029832

Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.

Cascade regulator kit for ARES PRO - TEC ErP     Code 3.028340
It can manage up to 8 boilers in cascade.
Composed by:
• HSCP viewer/programmer
• BCM board
• 24V power supply
• external probe
• puffer probe
System delivery probe kit for the boiler VICTRIX PRO       Code 3.024245

Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.

Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP      Code 1.028812
As per standard with these products.
Flow probe       Code 3.015267

Positioned on the delivery pipe, after the hydraulic separator, it allows the cascade and zone regulator to control system temperature as well as that of any mixed zones.

External probe (for installation in battery)       Code 3.024511

Connected to the cascade and zone regulator, it optimizes energy consumption by correcting the delivery temperature to the system for smooth temperature function

Wall box kit for cascade and zone regulator       Code 3.015265

If the cascade and zone regolator is not install inside an electrical box.

Modulating room thermostat       Code 3.015245

Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.

Remote control for single VICTRIX PRO       Code 3.020358
This is a modulating control unit that serves to optimize climatic management of the temperature in rooms. It can only be used on systems with a single temperature control.
Cascade and zone regulator kit       Code 3.015244
ON-OFF adjustment, modulation and malfunctions of the VICTRIX PRO in cascade (max 8). It can manage any climatic zone regulators in the system (max 3 plus 1 dedicated to the hot tap water circuit).
SHC multifunction board kit       Code 3.028338
It allows to integrate 3 more user circuits for each kits up to 4 kit (max 12 supplementary circuits).
N.B. 1 multifunction kit (not connected) is supplied as standard with the boiler.
24V Power pack kit       Code 3.028339
To be inserted in the control panel.
Hybrid Systems
Heat Pumps
Solar System Ready
Light Commercial
Condensing Boilers
Traditional Boilers
Water Heaters
Complete range
Split solutions
Recessed or in-house solutions
Wall-hung
Floor-standing
Complete range
Water heater
Complete range
Floor-standing
Complete range
Wall-hung
Floor-standing
Modular thermal block
Complete range
Top Tech wall-hung
Hi-Tech wall-hung
Wall-hung
Wall-hung and floor-standing with built-in storage tank
Complete range
Wall-hung
Wall-hung for outdoor installation
Wall-hung with built-in storage tank
Complete range
Heat pump water heaters
Sealed chamber

Flexible ducting kit Ø 80 mm       Code 3.014170

L=12 m + 4 centering spacers.
For condensing boilers.

Vertical outlet kit Ø 80/125 for flexible ducting system       Code 3.014174

For condensing boilers.

4 extension pipes Ø 80 kit 0,5 m long       Code 3.014642

For condensing boilers < 35 kW.

4 extension pipes Ø 80 kit 1 m long       Code 3.012088

For condensing boilers < 35 kW.

Ø 125 adapter kit for C9 ducting system       Code 3.022033

For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.

Extension pipe kit Ø 60/100 0,5 m long       Code 3.014643

For condensing boiler < 35 kW.

Anti-wind vertical terminal kit Ø 80       Code 3.021721

For condensign boiler < 35 kW.

Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge       Code 3.016365

For condensing boilers < 35 kW.

Twin pipes complete kit Ø 80/80       Code 3.012002

For condensing boiler < 35 kW.

Components support kit Ø 50 mm for flexible ducting system       Code 3.027355

Flexible chimney ducting system for condensing boilers.

Flanged stub-pipe kit Ø 80       Code 3.012087

For condensing boilers < 35 kW.

Flanged stub-pipe Ø 80 for flue discharge       Code 3.016364

For condensing boilers < 35 kW.

Horizontal concentric complete kit Ø 60/100 with swivel terminal       Code 3.024267
Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.

 

 

Vertical outlet kit for ducting system Ø 60       Code 3.012112

Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.

Flange Ø 60/100 coupling Ø 80/125 adapter kit       Code 3.022990

To be used with the concentric kits.
For condensing boiler < 35 kW.

Ø 100 adapter kit for C9 ducting system       Code 3.022032

For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.

90° bend Ø 60 for ducting system       Code 3.013870

For condensing boilers < 35 kW.

Horizontal outlet terminal Ø 80       Code 3.016363

For condensing boiler < 35 kW.

Terminal vertical outlet kit Ø 80       Code 3.015256

For condensing boiler < 35 kW.

Push-fitting extension pipes kit 1 m for ducting system Ø 60       Code 3.012144

4 extension pipes Ø 60 2 m long.
For condensing boilers < 35 kW.

Kit support components for flexible ducting system       Code 3.014171

For condensing boilers.

4 x 90° bends Ø 80 kit       Code 3.012091

For condensing boilers < 35 kW.

Flanged stub-pipe kit Ø 60/100       Code 3.012086

For condensing boiler < 35 kW.

45° bend Ø 80 kit       Code 3.012092

For condensing boilers < 35 kW.

 Ø 80 "T-shaped" terminal kit  Ø 80 (C5) for flexible ducting system       Code 3.027356

Flexible chimney ducting system for condensing boilers.

Flexible hose kit Ø 50 mm L. 10 m       Code 3.027354

Flexible chimney ducting system for condensing boilers.

Cover kit for VICTRIX SUPERIOR 32 ErP/ 32 X ErP    Code 3.017209

For external installations, in partially protected places

 

 

45° bend Ø 60/100 kit       Code 3.012095

For condensing boiler < 35 kW.

Kit support components for flexible ducting system       Code 3.014171

For condensing boilers.

Push-fitting extension pipes kit 2 m for ducting system Ø 60       Code 3.013869

1 extension pipe Ø 60 2 m long.
For condensing boilers < 35 kW.

90° bend Ø 60/100 kit       Code 3.012093

For condensing boiler < 35 kW.

Push-fitting extension pipes kit 1 m for ducting system Ø 60       Code 3.012144

4 extension pipes Ø 60 2 m long.
For condensing boilers < 35 kW.

1 extension pipe Ø 80 2 m long       Code 3.016837

For condensing boilers < 35 kW.

Adapter F/F       Code 3.014172

For flexible ducting system, Ø 80.
For condensing boilers.

90° bend terminal kit  Ø 50 (C5) for flexible ducting system       Code 3.027357

Flexible chimney ducting system for condensing boilers.

Vertical concentric kit Ø 80/125       Code 3.015243

For VICTRIX PRO.

Concentric horizontal complete kit Ø 60/100       Code 3.012000

Max lenght 12,9 m.
For condensing boiler < 35 kW.

Concentric vertical complete kit Ø 60/100 (black colour)       Code 3.018501
For condensing boiler < 35 kW.

Flexible/flexible adapter kit for flexible ducting system Ø 50       Code 3.027359

Flexible chimney ducting system for condensing boilers.

90° bend Ø 60/100 kit with inspection hole       Code 3.016174
For condensing boiler < 35 kW.
Horizontal concentric swivel outlet Ø 60/100       Code 3.027408

for condensing boilers < 35 kW.

 

 

Vertical terminal kit  Ø 80/125 for flexible ducting system Ø 50 (C5+C9)       Code 3.027358

Flexible chimney ducting system for condensing boilers.

Support bend kit for ducting system Ø 60       Code 3.012153

Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.
Concentric vertical complete kit Ø 60/100 (red ocher colour)       Code 3.016833

for condensing boilers < 35 kW.

Horizontal concentric kit Ø 80/125       Code 3.030782

for VICTRIX PRO 35-55-80 ErP.

Hanging bracket kit       Code 3.011600

Adjustable support chimney hanging bracket, for ducting system.
For traditional and condensing boilers < 35 kW.

HERCULES Condensing B22 - B23 terminal kit        Code 3.020004

Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.

Horizontal concentric complete kit Ø 60/100 Short       Code 3.024598

Max lenght 11,9 m.
For condensing boiler < 35 kW.

Extension pipe kit Ø 60/100 1 m long       Code 3.012089

For condensing boiler < 35 kW.

Spacer pipe clamp kit for ducting system Ø 60       Code 3.012146

3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.
CARV2 (Comando Amico Remoto modulante)

Pipe clamp kit for ducting system Ø 60       Code 3.012145

5 pipe clamps Ø 60.
For condensing boilers < 35 kW.
Cover kit for VICTRIX TERA/PLUS    Code 3.027263

For external installations, in partially protected places

Concentric horizontal outlet Ø 60/100       Code 3.016836

for condensing boilers < 35 kW.

45° bend Ø 80/125      CodE 3.010952

For traditional boilers.

Flanged stub-pipes Ø 80      Code 3.011570

For traditional boilers.

90° bend Ø 80 with inspection hole       Code 3.016175
Flue components for traditional boilers and water heaters.

Flanged stub-pipe Ø 60/100 vertical outlet      Code 3.011141

For traditional boilers.

90° bend Ø 60/100 with inspection hole       Code 3.016172
Flue components for traditional boilers and water heaters.
Female/female 90° bend Ø 80       Code 3.011571
Flue components for traditional boilers and water heaters.

Wind-stop outlet      Code 3.011488

For traditional boilers, Ø 80.

Flanged bend Ø 60/100       Code 3.011139
Flue components for traditional boilers and water heaters.
90° bend Ø 80/125 with inspection hole       Code 3.016171
Flue components for traditional boilers and water heaters.
5 pipe clamps kit       Code 3.011585

For traditional boilers, Ø 80 mm ducting system.

1 extension pipe Ø 80/125 0,5 m long      Code 3.011157

For traditional boilers.

Complete terminal kit       Code 3.011582

For traditional boilers, Ø 80 mm ducting system.

1 extension pipe Ø 60/100 2 m long       Code 3.010739

For traditional boilers.

Insulated twin pipes complete kit Ø 80/80       Code 3.010233

For traditional boilers.

45° bend Ø 80 kit      Code 3.010956

For traditional boilers.

4 x 90° bend Ø 80 kit      Code 3.010955

For traditional boilers.

1 extension pipe Ø 80/125 2 m long      Code 3.010946

For traditional boilers.

Horizontal outlet Ø 60/100       Code 3.011572

For traditional boilers.

Insulated 45° bend Ø 80 kit      Code 3.010954

For traditional boilers.

1 extension pipe Ø 80/125 1 m long      Code 3.010945

For traditional boilers.

Support bend kit       Code 3.012007

For traditional boilers, Ø 80 mm ducting system.

Flue outlet wind-stop grate Ø 80      Code 3.010962

For traditional boilers.

Insulated 90° bend Ø 80 kit      Code 3.010953

For traditional boilers.

Female/female stub-pipe Ø 80      Code 3.012714

For traditional boilers.

Concentric vertical complete kit Ø 80/125       Code 3.010352

For traditional boilers.

3 spacer pipe clamps kit       Code 3.011586

For traditional boilers, Ø 80 mm ducting system.

Twin pipes complete kit Ø 80/80       Code 3.010351

For traditional boilers.

"T" connector kit       Code 3.011595

For traditional boilers, Ø 80 mm ducting system.

"T" coupling seal kit with condensate trap       Code 3.011961

For traditional boilers, Ø 80 mm ducting system.

Kit comprised of "T" fitting, aluminum draining cap       Code 3.011601
The kit is completed with chimney closing panel for inspection, chimney inspection door and grommet Ø 16.
For traditional boilers.

Concentric horizontal complete kit Ø 80/125       Code 3.010526

For traditional boilers.

Chimney hole closing panel       Code 3.012008

For traditional boilers, Ø 80 mm ducting system.

Concentric vertical outlet Ø 60/100 (red ocher color)       Code 3.015631

To be combined with the flanged stub-pipe for vertical outlet (code 3.011141).
For traditional boilers.

Vertical flue outlet for twin pipes Ø 80       Code 3.010963

For traditional boilers.

1 insulated extension pipe Ø 80 1 m long       Code 3.010947

For traditional boilers.

Adapter Ø 60/100 - 80/125      Code 3.010957

For traditional boilers.

1 extension pipe Ø 60/100 1 m long       Code 3.018277
Flue components for traditional boilers and water heaters.
4 extension pipes Ø 80 1 m long       Code 3.011583

For traditional boilers, Ø 80 mm ducting system.

class="MsoNormal">1 extension pipe Ø 80 2 m long       Code 3.011167

For traditional boilers.

90° bend Ø 60/100       Code 3.018279
Flue components for traditional boilers and water heaters.
K1 extension pipe Ø 80 2 m long       Code 3.011584

For traditional boilers, Ø 80 mm ducting system.

1 extension pipe Ø 60/100 0,5 m long       Code 3.018278
Flue components for traditional boilers and water heaters.
Concentric horizontal complete kit Ø 60/100       Code 3.017736
Flue components for traditional boilers and water heaters.

4 extension pipes Ø 80 1 m long       Code 3.010741

For traditional boilers.

1 extension pipe Ø 60/100 0,3 m long with inspection hole       Code 3.014418
Flue components for traditional boilers and water heaters.

90° bend Ø 80/125      Code 3.010951

For traditional boilers.

1 insulated extension pipe Ø 80 2 m long       Code 3.010948

For traditional boilers.

Condense tank kit Ø 80      Code 3.012009

For traditional boilers.

4 extension pipes Ø 80 0,5 m long       Code 3.011491

For traditional boilers.

45° bend Ø 60/100      Code 3.010950

For traditional boilers.

Condensate siphon kit       Code 3.011599

For traditional boilers, Ø 80 mm ducting system.

Condense tank kit Ø 60/100       Code 3.016173
Flue components for traditional boilers and water heaters.

Condense tank kit Ø 80/125      Code 3.010960

For traditional boilers.

Concentric horizontal complete kit Ø 60/100 STAR       Code 3.014147

For traditional boilers.

Concentric horizontal anti-freeze complete kit Ø 60/100       Code 3.018210
Flue components for traditional boilers and water heaters.
Extension pipe kit Ø 160 0,5 m long      Code 3.024659
For RAPAX 200/300 V3 e 200/300 SOL
87° bend kit Ø 160    Code 3.024517
for RAPAX 200/300 V3 and 200/300 SOL V3
Inlet/exhaust pipes insulation kit     Code 3.027545

For RAPAX 200/300 V3 and 200/300 SOL V3

2 x 45° bend kit Ø 160    Code 3.024518

for RAPAX 200/300 V3 and 200/300 SOL V3

Duct adapter Ø 160       Code 3.025232

for RAPAX 200/300 V3 and 200/300 SOL V3 
 

Inlet/exhaust pipes insulation kit     Code 3.027545

For RAPAX 100 V2

Composed by:

• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm

 

Extension pipe Ø 200 kit 0,5 m long for flue manifold       Code 3.024663
For installations in central heating systems with VICTRIX PRO.  
Additional exhaust manifold kit Ø 250 with flue lock for 5 VICTRIX PRO 100/120       Cod. 3.024667

Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.

Exhaust manifold kit 2 VICTRIX PRO 80/100/120 Ø 200 with flue lock       Code 3.024281

Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.

Additional exhaust manifold kit Ø 250 with flue lock for 4 VICTRIX PRO 100/120       Code 3.024666

Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.

Additional exhaust manifold kit VICTRIX PRO 35/55 Ø 160 with flue lock       Code 3.024280

Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.

87° bend kit Ø 250 for flue manifold       Code 3.024670
For installations in central heating systems with VICTRIX PRO.
Extension pipe Ø 250 kit 1 m long for flue manifold       Code 3.024668

For installations in central heating systems with VICTRIX PRO.

No. 2 45° bend kit Ø 200 for flue manifold       Code 3.024664

For installations in central heating systems with VICTRIX PRO.

Extension pipe Ø 200 kit 1 m long for flue manifold       Code 3.024662
For installations in central heating systems with VICTRIX PRO.
Additional exhaust manifold kit VICTRIX PRO 80/100/120 Ø 200 with flue lock       Code 3.024282

Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.

2 x 45° bend kit Ø 125     Cod. 3.016180

For RAPAX 100 V2.
 

Supporting kit for side flue discharge ARES Tec       Code 3.023675
All models.
Rear flue discharge kit for ARES Tec 250/350 kW       Code 3.023674
In comparison to the standard versions, the ARES Tec 150/350 models can be installed with a flue exhaust on the back, using appropriate optional kits.

Exhaust manifold kit 2 VICTRIX PRO 35/55 Ø 160 with flue lock       Code 3.024279

Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.

Extension pipe kit Ø 110/160 1 m long       Code 3.031397

for VICTRIX PRO 100-120 ErP.

Rear flue discharge kit for ARES Tec 150/200 kW       Code 3.023701
In comparison to the standard versions, the ARES Tec 150/350 models can be installed with a flue exhaust on the back, using appropriate optional kits.

87° bend Ø 110/160 kit       Code 3.031396

for VICTRIX PRO 100-120 ErP.

45° bend Ø 110/160 kit       Code 3.031395

for VICTRIX PRO 100-120 ErP.

Extension pipe kit Ø 125 0,5 m long        Cod. 3.016370

For RAPAX 100 V2 
 

 

 

Extension pipe kit Ø 110/160 2 m long       Code 3.031398

for VICTRIX PRO 100-120 ErP.

Extension pipe kit Ø 125 1 m long      Cod. 3.016371

For RAPAX 100 V2.
 

Extension pipe kit Ø 125 2 m long       Cod. 3.015250

For RAPAX 100 V2.
 

87° bend kit Ø 125     Cod. 3.016179

For RAPAX 100 V2.
 

Horizontal concentric kit Ø 110/160      Code 3.031393

for VICTRIX PRO 100-120 ErP.

Horizontal kit Ø 80 (to discharge in the chimney)       Code 3.015254

For VICTRIX PRO.

No. 2 45° bend kit Ø 250 for flue manifold       Code 3.024669

For installations in central heating systems with VICTRIX PRO.

Terminal vertical outlet outdoor kit Ø 80       Code 3.024295

For VICTRIX PRO.

Extension pipe kit Ø 160 1 m long     Code 3.024516

For RAPAX 200/300 V3 and 200/300 SOL V3

Terminal horizontal outlet kit Ø 80 (to discharge horizontally)       Code 3.015255

For VICTRIX PRO.

Hybrid Systems
Heat Pumps
Thermal Solar System
Solar System Ready
Light Commercial
Condensing Boilers
Traditional Boilers
Water Heaters
Pellet boilers
Fancoil Units
Complete range
Split solutions
Recessed or in-house solutions
Wall-hung
Floor-standing
Complete range
Split mono-phase
Mono-phase
Three-phase
Water heater
Complete range
Pump-circulated packs for DHW
Combined pump-circulated packs for heating and DHW
Individual components
Packs with natural circulation for DHW
Complete range
Floor-standing
Complete range
Wall-hung
Floor-standing
Modular thermal block
Complete range
Top Tech wall-hung
Hi-Tech wall-hung
Wall-hung
Wall-hung and floor-standing with built-in storage tank
Complete range
Wall-hung
Wall-hung for outdoor installation
Wall-hung with built-in storage tank
Complete range
Heat pump water heaters
Open chamber
Sealed chamber
Complete range
With-in pellet tank
Complete range
Wall-mounted solutions
Floor Standing solutions
Recessed solutions
-15°C anti-freeze protection for CAESAR 14 3 E and Super CAESAR 17 3 E       Code 3.014113

Per protezione antigelo fino a -15°C.
Per CAESAR 14 ErP e SUPER CAESAR 17 ErP.

1 litre bottle of glycol       Code 1.028473
To be mixed with water according to the minimum outside temperature.
1,5 kW sanitary electric resistance     Code 3.024897
 
 
 

 

 

 

12 litre system expansion vessel kit     Code 3.011679
for plants with AUDAX.
18 litre expansion vessel kit        Code 3.019131
Including metal clamp and wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
1"¼ thermostatic mixing valve kit        Code 3.020322
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 85 °C.
Equipped with thermometer
2 brackets kit for slates/tiles for CP4 XL/M Flat-Plate Collector        Code 3.022680
The kit includes: 2 brackets, 1 fixing clamp with hole, 1 mounting template (to be removed after installation).
2 brackets kit for slates/tiles for CSV 14 Vacuum Collector        Code 3.022700
These systems allow installing vacuum collectors level on sloped roofs. Depending on the roof-type, appropriate screws/plugs must be provided to ensure a correct fixing.
The kit includes: 2 brackets, 1 fixing upright and 2 collector side fixing brackets.
2 high temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP        Code 3.025485

Modulating low consumption pumps.

2 litres additional expansion vessel       Code 3.017514
Available for: VICTRIX, VICTRIX X.
2 litres additional expansion vessel       Code 3.018433
Available for MAGIS VICTRIX ErP, MAGIS HERCULES ErP and for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, AVIO ECO 24, NIKE ECO 24, VICTRIX SUPERIOR ErP/X ErP, MAIOR EOLO, MINI EOLO/NIKE and MINI EOLO/NIKE X.

 

 

2 low temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP       Code 3.025487

Modulating low consumption pumps.

2 plug kit for CP4 XL/M Flat-Plate Collector        Code 3.020364
The kit includes: 2 mechanical sealing plugs to close fittings not used by CP4 XL/M Flat-Plate Collector.

 
2 zones kit with motorized valves MAGIS VICTRIX     Code 3.023769
Dimensions (H x W x P) 220 x 350 x 230 mm.
2-way group valve kit       Code 3.028507
Composed of automatic valve with thermoelectric head and holder to balance the plant load losses.
 
 
24 litre expansion vessel kit       Code 3.019138
Including metal clamp and wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
3 kW integration electric resistance kit     Cod. 3.026300

 

to be installed for central heating systems with MAGIS PRO ErP in stand-alone configuration (kit to be placed inside hydronic unit).

230 or 400 Vac power supply required.

3 kW integration electric resistance kit for MAGIS PRO V2     Code 3.030991

For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing

3-way group valve kit    Code 3.028508
Composed of three-way diverter valve with thermoelectric head, by-pass tube and holder to balance plant load losses.
 
 
3-way valve return temperature raising kit       Code 3.020632
35 litre expansion vessel kit        Code 3.019135
Including wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
4 brackets kit for slates/tiles for CP4 XL/M Flat-Plate Collector        Code 3.022678
The kit includes: 4 brackets, 2 collector side fixing brackets.
It allows to fix the collector frame onto sloped roofs without drilling the tiles (for 1 collector).
4 brackets kit for slates/tiles to be drilled for CP4 XL/M Flat-Plate Collector        Code 3.019105
The kit includes: 4 brackets.
It allows to fix the collector frame onto sloped roofs.
Always add the fixing element kit code 3.022922.
4 brackets kit for slates/tiles to fix directly on roof for NATURAL SOL       Code 3.019236
It allows to fix the collector frame directly onto sloped roofs without drilling the tiles.
4 "L"-shaped brackets kit for slates/tiles on smooth roofs for CP4 XL/M Flat-Plate Collector        Code 3.022776
The kit includes: 4 brackets.
It allows to fix the selector frame onto smooth roofs (for 1 collector). Always add the fixing element kit code 3.022922.
80 litre expansion vessel kit        Code 3.019139
With support for placing on the floor.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
90° bended duct for HYDRO IN 1000    Code 3.029860
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 

90° bended duct for HYDRO IN 200    Code 3.029856

Kit for recessed installation in false ceiling with intake and airflow at the bottom.

Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.

 

 
 
90° bended duct for HYDRO IN 400    Code 3.029857
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
90° bended duct for HYDRO IN 600    Code 3.029858
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 
90° bended duct for HYDRO IN 800    Code 3.029859
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 
90° gas valve for water heater    Code 3.014145

Per scaldabagni.

AUDAX connection kit     Code 3.024713
For TRIO V2 e TRIO MONO V2 with AUDAX without gas boiler.
Inludes: hydraulic fitting, expansion vessel and manometer.
Additional 2 kW electric resistance kit for INOXSTOR 200/300/500 and UB 550/750     Code 3.020861

Power supply 230 or 400 Vac.

Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750     Code 3.020862

Power supply 230 or 400 Vac.

Additional low temperature zone kit for HERCULES CONDENSING ABT 32 ErP       Code 3.025486

Modulating low consumption pump.

Additional mixed 2nd zone kit      Code 3.027865
Additional mixed 2nd zone kit composed by:
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated
Additional mixed zone kit for MAGIS HERCULES     Code 3.023314

Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.

Aesthetic upper cover DOMUS CONTAINER      Code 3.027175

 

 

 

 

 

 

Aesthetic upper cover for DOMUS CONTAINER for SUPER TRIO (Technical box)       Code 3.030484

 

 

 

Air flow aluminum grill with curved profile for HYDRO IN 1000    Code 3.029895
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 
Air flow aluminum grill with curved profile for HYDRO IN 200    Code 3.029891
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 
Air flow aluminum grill with curved profile for HYDRO IN 400    Cod. 3.029892
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 
Air flow aluminum grill with curved profile for HYDRO IN 600    Code 3.029893
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 
Air flow aluminum grill with curved profile for HYDRO IN 800    Code 3.029894
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 
Air flow aluminum grill with straight profile for HYDRO IN 1000    Code 3.029865
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 
Air flow aluminum grill with straight profile for HYDRO IN 200    Code 3.029861
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
Air flow aluminum grill with straight profile for HYDRO IN 400    Code 3.029862
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 
Air flow aluminum grill with straight profile for HYDRO IN 600    Code 3.029863
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 
Air intake aluminum grill with curved profile for HYDRO IN 1000    Code 3.029875
Kit for recessed installation in false ceiling with intake and airflow at the bottomIn aluminum.
The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 
Air intake aluminum grill with curved profile for HYDRO IN 200    Code 3.029871
Kit for recessed installation in false ceiling with intake and airflow at the bottomIn
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 
Air intake aluminum grill with curved profile for HYDRO IN 400    Code 3.029872
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 
Air intake aluminum grill with curved profile for HYDRO IN 600    Code 3.029873
Kit for recessed installation in false ceiling with intake and airflow at the bottom
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 
Air intake aluminum grill with curved profile for HYDRO IN 800    Cod. 3.029874
Kit for recessed installation in false ceiling with intake and airflow at the bottomIn aluminum.
The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 
Air intake aluminum grill with straight profile for HYDRO IN 1000    Code 3.029870
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
 
 
 
 
 
Air intake aluminum grill with straight profile for HYDRO IN 200    Code 3.029866
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
 
 
 
 
 
Air intake aluminum grill with straight profile for HYDRO IN 400    Cod. 3.029867
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
 
 
 
 
 
Air intake aluminum grill with straight profile for HYDRO IN 600    Code 3.029868
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
 
 
 
 
 
Air intake suction duct for HYDRO IN 1000    Code 3.029850
Kit for recessed installation in false ceiling with bottom air intake and horizontal and with intake and airflow at the bottom
 
 
 
 
Air intake suction duct for HYDRO IN 200    Code 3.029846
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
 
 
 
 
Air intake suction duct for HYDRO IN 400    Code 3.029847
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
 
 
 
 
Air intake suction duct for HYDRO IN 600    Code 3.029848
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom.
 
 
 
 
Air intake suction duct for HYDRO IN 800    Code 3.029849
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
 
 
 
 
All-purpose connection kit for wall-hung combi boilers       Code 3.011667

For wall-hung combi boilers and also for wall-hung with built-in storage tank.

All-purpose connection kit for water heater      Code 3.015027

Suitable to replace obsolete appliances

Anti condensation mixing valve kit      Code 3.028491
To avoid phenomenons of condensate formation.
Anti freeze protection kit -15 °C        Code 3.017324

Anti freeze protection kit -15 °C  
For TT versions, EXA, TERA, OMNIA, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS, MAGIS PRO V2 and MAGIS COMBO.

Anti freeze protection kit -15 °C  VICTRIX PRO       Code 3.024513

Usable in outdoor installations for minimum temperature as low as -15 °C.

Anti scale kit     Code 3.020628

 

 

 

 

 

 

Anti-freeze protection kit -15 °C for VICTRIX SUPERIOR ErP/X ErP       Code 3.015348

 

 

 

 

Anti-freeze protection kit MAGIS VICTRIX     Code 3.023770
Until -15 °C

 

 

Anti-scale kit for AVIO/ZEUS kW      Code 3.013061

Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per AVIO 24 ErP.

Anti-scale kit for HERCULES Condensing ErP      Code 3.019999

Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES CONDENSING ErP.

Anti-scale kit for HERCULES Solar 26 1A     Code 3.020498

Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES SOLAR 200 CONDENSING.

Anti-scale kit for MAGIS HERCULES ErP    Code 3.023316

Installabile all'interno di MAGIS HERCULES ErP.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.

Anti-scale kit for MAGIS VICTRIX     Code 3.023310
Only for internal installation of MAGIS VICTRIX
Anti-scale kit      Code 3.016305

Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.

Anti-scale kit  Code 3.013860

Polyphosphate dispenser kit 

Anti-scale kit for VICTRIX SUPERIOR ErP, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO       Code 3.017323

For VICTRIX SUPERIOR ErP, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO.

Anti-scale kit    Code 3.013499

DIMV2 TOP 2 ZONE

DIM V2 TOP 2 ZONECARV2 (Comando Amico Remoto modulante)

DIM V2 TOP 2 ZONE

For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24

Anti-scale kit for water heater      Code 3.014114

Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per scaldabagni.

Automatic valve kit for expansion vessel        Code 3.023005
As standard for a packs.
Automatically shuts the passage of fluid during maintenance of the expansion vessel.
Basic free-standing 45° installation kit for 1 vertical CP4 XL/M Flat-Plate Collector        Code 3.022674
The kit includes: 4 profiles , 2 collector side fixing brackets.
Boiler COMBI connection kit     Code 3.024712
For solutions with TRIO V2/MONO V2 matched to AUDAX heat pump and combi boiler (VICTRIX TERA).
Includes support bracket for gas boiler and hydraulic fitting
Boiler PLUS connection kit    Code 3.024711
For solutions with TRIO V2/MONO V2 matched to AUDAX heat pump and only heating boiler (VICTRIX TERA PLUS).
Includes support bracket for gas boiler, NTC probe for storage tank and hydraulic fitting
Bottom connection kit     Code 3.020575

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Bottom cover kit for VICTRIX OMNIA Code 3.028656

Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT

Bracket kit for wall mounting inertial storage tank for MAGIS COMBO     Code 3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
 
Buffer tank 15 litres     Cod. 3.026304
to be installed in CONTAINER or DOMUS CONTAINER 
By-pass kit for VICTRIX PRO 35/55      Code 3.024519
The kit is envisaged on those systems (without hydraulic manifold) in which the hydraulic flow can be under 850 l/h.
Insulation as standard.
CONTAINER for SUPER TRIO (Recessed frame)       Code 3.030394

Recessed frame for solutions SUPER TRIO with MAGIS PRO V2 or MAGIS COMBO PLUS.

is the first of the main components of SUPER TRIO systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.

Dimensions (H x W x D) mm 2200 x 1100 x 495

Casing cover panel with intake air grill for HYDRO IN 1000    Code 3.029885
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1572 x 9 mm
 
 
 
 
Casing cover panel with intake air grill for HYDRO IN 200    Code 3.029881
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 772 x 9 mm
 
 
 
 
Casing cover panel with intake air grill for HYDRO IN 400    Code 3.029882
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
 
 
 
 
Casing cover panel with intake air grill for HYDRO IN 600    Cod. 3.029883
Kit for wall built-in installation.
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1172 x 9 mm.
 
 
 
 
Casing cover panel with intake air grill for HYDRO IN 800    Code 3.029884
Kit for wall built-in installation.
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1372 x 9 mm.
 
 
 
 
Ceiling casing cover panel with accessible air grill for HYDRO IN 1000    Cod. 3.029890
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1572 x 9 mm
 
 
 
 
Ceiling casing cover panel with accessible air grill for HYDRO IN 2000    Code 3.029886
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 772 x 9 mm
 
 
 
Ceiling casing cover panel with accessible air grill for HYDRO IN 4000    Code 3.029887
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
 
 
 
 
Ceiling casing cover panel with accessible air grill for HYDRO IN 600    Code 3.029888
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1172 x 9 mm
 
 
 
 
Ceiling casing cover panel with accessible air grill for HYDRO IN 800    Code 3.029889
Kit for ceiling built-in installation.
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1372 x 9 mm.
 
 
 
 
Clock kit for Recirculation       Code 3.015431

To be used to manage the recirculation pump.

Condensate antifreeze heating cable kit       Code 3.027385

for external unit

Condensate discharge pump kit      Code 3.026374

For wall-hung boilers: compact condensate drain pump kit.

Condensate discharge pump kit      Code 3.026841

For floor standing boilers: compact condensate drain pump kit.

Condensate neutralizer kit up to 1500 kW      Code 3.023662

With grains.

Condensate neutralizer kit for cascade installation      Code 3.019464
Necessary to neutralize the acidity of the condensation.
Inclusive of granulate.
Condensate neutralizer kit   Code 3.019857
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Connection cable to shift water connections from left to right     Code 3.029834
to be used in case of reversibility of the hydraulic pipe connections on the right side, rotating the battery 180°
 
 
 
 
Connection kit for 1 CSV 14 Vacuum Collector        Code 3.022796
Multiple CSV 14 Vacuum Collectors shall be connected by means of the ¾" M-F threaded fittings and the gaskets already present on the collectors.
The kit includes: fittings for Ø 18 copper pipes and DN 16 and DN 20.
Connection kit for 1 vertical CP4 XL/M Flat-Plate Collector        Code 3.022797
The kit includes: fittings for Ø 18 copper pipes and DN 16 and DN, 20 steel pipes, 2 plugs for CP4 XL/M.
(To be used for sets of 1 to 6 collectors in series)
Connection kit for AUDAX and recessed buffer tank 50 litres    Code 3.028171
when buffer tank is installed at the side of SOLAR CONTAINER
Connection kit for EOLO Extra 24 kW       Code 3.019335
Connection kit for HYDRO 3/4 left exit      Code 3.029520
To be used in case of left side piping.
Arrangement box recessed for pipes is needed.
 
 
Connection kit for MAIOR EOLO and MINI EOLO 28       Code 3.021453
Connection kit for NIKE Mini 28 kW Special       Code 3.016671
Connection kit for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS   Code 3.015229

for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS   

Connection kit for R32 circuit for MAGIS PRO V2      Code 3.030883
for an easy connection of the refrigerant circuit, even
in the case of pipes coming out from the wall on the
internal unit 
Connection kit for R410A circuit      Code 3.026089
Per connessioni raccordi gas unità esterna MAGIS COMBO/PLUS e MAGIS PRO ErP dalla parete in cui è installata l'unità interna.
Connection kit for R410A circuit      Code 3.026089
Per connessioni raccordi gas unità esterna MAGIS COMBO/PLUS e MAGIS PRO ErP dalla parete in cui è installata l'unità interna.
Connection kit for R410A circuit      Code 3.026089
Per connessioni raccordi gas unità esterna MAGIS COMBO/PLUS e MAGIS PRO ErP dalla parete in cui è installata l'unità interna.
Connection kit for R410A circuit      Code 3.026089
Per connessioni raccordi gas unità esterna MAGIS COMBO/PLUS e MAGIS PRO ErP dalla parete in cui è installata l'unità interna.
Connection kit for UB Inox 200-2 or UB Inox 120-2 in parallel     Code 3.022212

Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.

Connection kit for VICTRIX 26       Code 3.017494
Connection kit for VICTRIX OMNIA in TRIO    Code 3.028657
For solutions with TRIO V2/MONO V2 matched to AUDAX heat pump and combi boiler (VICTRIX OMNIA).
Includes support bracket for gas boiler
Connection kit for VICTRIX X TT, VICTRIX X TT ErP and VICTRIX EXA 24 X ErP     Code 3.024907

For the installation of heating only boilers.

Connection kit for VICTRIX Zeus 26       Code 3.020505
Connection kit for additional vertical CP4 XL/M Flat-Plate Collector        Code 3.019085
The kit includes: hydraulic fittings to connect up to 3 CP4 XL/M Flat-Plate Collectors in series.
Connection kit for double solar pump stations        Code 3.019096
The kit includes: hydraulic fittings.
Connection kit for single solar pump stations        Code 3.019095
The kit includes: hydraulic fittings.
Connection kit with flexible pipes and shut-off knobs 1"     Code 3.025954

Kit rubinetti di intercettazione da 1" con tubi flessibili in acciaio antivibranti.

Cover for CP4 M Flat-Plate Collector       Code 1.028522
Allows to cover the collector to guarantee its integrity until it is filled.
Cover for CP4 XL Flat-Plate Collector       Code 1.033271
Allows to cover the collector to guarantee its integrity until it is filled.
Cover for CSV 14 Vacuum Collector       Code 1.033273
Allows to cover the collector to guarantee its integrity until it is filled.
Cover kit for CAESAR EXTRA    Code 3.029443

For CAESAR EXTRA.

Cover kit for CAESAR 14    Code 3.014201

Per funzionamento in luoghi parzialmente protetti.
Per CAESAR 14 ErP.

Cover kit for EOLO Star 24    Code 3.019090
Per MYTHOS HP.
Per funzionamento in luoghi parzialmente protetti.
Cover kit for Super CAESAR 17    Code 3.015980

Per funzionamento in luoghi parzialmente protetti.
Per SUPER CAESAR 17 ErP.

Cover kit for VICTRIX OMNIA Code 3.028415

For external installations, in partially protected places

D.H.W. expansion vessel for AVIO/ZEUS kW       Cod. 3.017744
D.H.W. expansion vessel for VICTRIX Zeus       Code 3.020400
  • Instructions and warning book
DIM 2 ZONES ErP       Code 3.025607
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
DIM 3 ZONES ErP       Code 3.025608
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
DIM BASIC ErP      Code. 3.025606
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.
DIM H-2LT ErP       Code 3.025610

Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.

DIM H-LT ErP       Code 3.025609
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
DN 16 steel pipe connection kit for collectors        Code 3.019125
The kit includes:
double DN 16 insulated 15 m long steel pipe integrated cable for solar collector temperature probe.
DN 20 steel pipe connection kit for collectors        Code 3.020354
The kit includes:
double DN 20 insulated 15 m long steel pipe integrated cable for solar collector temperature probe hydraulic fittings for connections.
DOMUS CONTAINER (technical box)       Code 3.022167

Technical box for solutions TRIO V2 and TRIO MONO V2. 
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365

 

 

   
DOMUS CONTAINER for SUPER TRIO (Technical box)       Code 3.030393

Technical box for solutions SUPER TRIO with MAGIS PRO V2 and MAGIS COMBO PLUS.

is the first of the main components of SUPER TRIO systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.

Dimensions (H x W x D) mm 2110 x 1160 x 520

Dehumidifier back frame kit     Code 3.022146
Dehumidifier front grille kit     Code 3.022147
Dehumidifier kit     Code 3.021529
Only for recessed installation with codes 3.022146 and 3.022147

 

Distribution manifold for 1 direct and 1 mixed temperature zones     Code 3.026301

Kit to be used without system manager controller. Dedicated to MAGIS PRO V2 and MAGIS COMBO.

Distribution manifold kit for 1 direct and 2 mixed temperature zones      Code 3.021527
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
Wall-hung or recessed installation. Low consumption pumps.
Distribution manifold kit for 2 mixed temperature zones     Code 3.021528
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each delivery.
Wall-hung or recessed installation. Low consumption pumps.
Double solar pump station (1-6 l/min) ErP        Code 3.025664
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Double solar pump station (2-12 l/min) ErP        Code 3.025665
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Double solar pump station (8-28 l/min) ErP        Code 3.025666
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Draught adjuster kit      Code 3.028488
For LUXOR 16 - 20 - 24 - 28 - 33, recommended for chimneys with long paths (over 10 meters).
Electronic anode kit for Storage Tank Unit up to 500 litres      Code 3.020344
Can be used instead of magnesium anodes, requires no periodical replacement.
External cover kit with acoustical insulation for ZENITAIR-MONO    Code 3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
 
 
 
 
Fixing elements kit for CP4 XL/M Flat-Plate Collector        Code 3.022922
This kit must always be added when using the kits Code 3.019105 and Code 3.022776.
The kit includes: collector side fixing brackets and 1 intermediate bracket.
Frame connection kit for additional CP4 XL/M Flat-Plate Collector        Code 3.022681
The kit includes: 2 brackets.
The kit allows to mechanically connect two frames together when installing more than one collector.
Frame connection kit for additional CSV 14 Vacuum Collector        Code 3.022735
The kit includes: 2 brackets.
The kit allows to mechanically connect two frames together when installing more than one collector.
Frame on tiles kit for 1 horizontal CP4 XL/M Flat-Plate Collector        Code 3.022749
The kit includes: 2 horizontal profiles.
(the profiles must be shortened when using CP4 M)
Frame on tiles kit for 1 vertical CP4 XL/M Flat-Plate Collector        Code 3.022670
The kit includes: 2 horizontal profiles.
Frame on tiles kit for 1 vertical CSV 14 Vacuum Collector        Code 3.022701
Installation on tiles on sloped roofs requires the use of specific support frames which consist in 2 horizontal aluminium profiles on which the CSV 14 Vacuum Collector is fixed. In order to fix the frames, use the relative support brackets. The kit includes: 2 horizontal profiles.
Frame on tiles kit for 2 vertical CP4 XL/M Flat-Plate Collectors        Code 3.022671
The kit includes: 2 horizontal profiles.
Free-standing 45° installation extension kit for vertical CP4 XL/M Flat-Plate Collector        Code 3.022677
The kit includes: 2 profiles , 1 fixing clamp with hole , 1 mounting template (to be removed after installation).
Free-standing 45° installation kit for 1 Flat-Plate Collector        Code 3.022750
The kit includes: 4 profiles, 2 collector side fixing brackets.
(the horizontal profiles must be shortened when using CP4 M)
Free-standing 45° installation kit for 1 vertical CSV 14 Vacuum Collector        Code 3.022733
Free-standing installation on flat roofs, terraces or on the ground with a 45° inclination require the use of specific aluminium profiles which allow installation of the CSV 14 Vacuum Collectors. Appropriate systems must be used for fixing based on the capacity of the installation of withstanding the action of atmospheric agents, especially wind. In addition to the kits, the support frame kit for the vertical CSV 14 Vacuum Collector and eventually the extra CSV 14 frame connection kit must be provided.
The kit includes: 2 profiles collector fixing bracket.
Gas pressure regulation kit for water heater JULIUS     Code 3.014607

Per scaldabagni JULIUS.

Granulate for condensate neutralizer VICTRIX PRO      Code 3.019865
Extra granulate for condensation passivator kit code 3.019857.
Granulate kit for condensate neutralizer (25 kg)      Code 3.023663

Complete recharge for condensate neutralizer kit (cod. 3.023662).

HYDRO 3     Code 3.027918
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
HYDRO 4     Code 3.027919
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
HYDRO FS 1000     Code 3.028505
Floor standing hydronic fancoil 
 
HYDRO FS 200     Code 3.028500
Floor standing hydronic fancoil 
 
 
 
HYDRO FS 400     Code 3.028501
Floor standing hydronic fancoil
 
HYDRO FS 600     Code 3.028502
Floor standing hydronic fancoil 
 
 
HYDRO FS 800     Code 3.028503
Floor standing hydronic fancoil 
 
 
HYDRO IN 1000     Code 3.029845
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 200     Code 3.029841
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 400     Code 3.029842
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 600    Code 3.029843
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 800     Code 3.029844
Wall and ceiling built-in hydronic fancoil
 
 
 
High temperature second zone kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP        Code 3.025484
Modulating low consumption pump.
Horizontal buffer tank with capacity of 100 litres     Code 3.027844
For AUDAX heat pump.
Horizontal buffer tank with capacity of 200 litres     Code 3.027845
For AUDAX heat pump.
Horizontal buffer tank with capacity of 25 litres     Code 3.027842
For AUDAX heat pump.
Horizontal buffer tank with capacity of 75 litres     Code 3.027843
For AUDAX heat pump.
Hydraulic manifold kit DN 100 for 2 VICTRIX PRO 80/100/120 in cascade      Code 3.023959
Kit to connect 2 VICTRIX PRO 80/100/120 in cascade installation; it includes a 2 way interception valve, a 3-way interception valve and a non-return valve for each generator.
Insulation as standard.
Hydraulic manifold kit DN 100 for additional VICTRIX PRO 80/100/120 in cascade      Code 3.023960
In combination with kit 3.023959 serves to connect from 3 to 5 VICTRIX PRO 80/100/120 boilers in cascade installation (one kit required for each additional boiler); includes a 2-way interception valve, a 3-way interception valve and a non-return valve.
Insulation as standard.
Hydraulic manifold kit G 2 ½" for 2 VICTRIX PRO 35/55 in cascade      Code 3.023953
Kit for connection of 2 VICTRIX PRO 35/55 in cascade installation; includes a 2-way valves, a 3-way interception valvem and a non-return valve for each generator.
Insulation as standard.
Hydraulic manifold kit for VICTRIX PRO 35/55      Code 3.023951
Specially sized for large thermal systems with high water content. Equipped with sludge collection filter on the return pipe.
Insulation as standard.
Hydraulic manifold kit for VICTRIX PRO 80/100/120      Code 3.023952
Specially sized for large thermal systems with high water content. Equipped with sludge collection filter on the return pipe.
Insulation as standard
Hydraulic manifold kit for VICTRIX PRO cabinet      Code 3.027189

To install inside the cabinet kit.

Hydraulic manifold kit G 2 ½" for additional VICTRIX PRO 35/55 in cascade      Code 3.023954
In combination with kit 3.023953, it serves to connect from 3 to 5 VICTRIX PRO 35/55 boilers in cascade installation (one kit required for each additional boiler); includes a 2-way interception valve, a 3-way interception valve and a non-return valve.
Insulation as standard.
Hydraulic separator for 100 kW installations      Code 3.020839
Separator with G2 ½" threaded connectors.
Insulation as standard.
Hydraulic separator for 200 kW installations      Code 3.021377
Separator with G2 ½" threaded connectors.
Insulation as standard.
Hydraulic separator for 350 kW installations      Code 3.023965
Separator with threaded connectors - DN 100.
Insulation as standard.
Hydraulic separator for 400 kW installations      Code 3.021378
Separator with G2 ½" threaded connectors on boiler side - DN 100 on system side.
Insulation as standard.
Hydraulic separator for 600 kW installations      Code 3.023962
Separator with threaded connectors - DN 100.
Insulation as standard.
Hydraulic separator from ARES Tec 150 kW to ARES Tec 350 kW      Code 3.023659

To be mainly used when the pump is independently dimensioned by the designer.

Hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW      Code 3.023660

To be mainly used when the pump is independently dimensioned by the designer.

IPX4D protection box kit for cascade safety kit      Code 3.024038
IPX4D protection box kit for single boiler safety kit VICTRIX PRO      Code 3.024028
Integration electric resistance kit 2, 4 or 6 kW for heating system     Code 3.021525

For internal installation

Integrative 1,5 kW electric resistance kit for NATURAL SOL       Code 3.020341
Ideal to guarantee the anti-freeze function, can be calibrated by a specific thermostat.
Lateral connection kit   Code 3.020574
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Level sensor kit     Code 3.028493
To insert in the pellet tank inside boiler.
Low temperature second zone kit for HERCULES SOLAR 26 2 ErP, HERCULES CONDENSING ErP       Code 3.025483

Modulating low consumption pump.

MAGIS PRO connection kit     Code 3.026303
For TRIO V2/MONO V2 with MAGIS PRO V2.
includes: hydraulic and gas R410A and R32 fittings, support bracket for indoor unit of MAGIS PRO and NTC probe for storage tank.
Magnetic cyclone filter kit       Code 3.024176

Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).

Available for wall-hung condensing boilers.

NATURAL SOL by-pass kit       Code 3.022453
Can be used to empty the storage tank during winter.
Outdoor casing for safety kit and hydraulic separator from ARES Tec 150 kW to ARES Tec 350 kW      Code 3.023670

In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.

Outdoor casing for safety kit and hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW      Code 3.023671

In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.

Outdoor casing for safety kit and plate heat exchanger from ARES Tec 150 kW to 350 kW      Code 3.023672

In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.

Outdoor casing for safety kit and plate heat exchanger from ARES Tec 440 kW to 900 kW      Code 3.023673

In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.

Pellet charger control unit      Code 3.028492

To consider in addition to extra pellet tank.

Pellet tank with feeding screw - Capacity 350 l / 225 kg      Code 3.028487
Dimensions (H x W x D) mm 1520 x 566 x 962
Pellet tank with feeding screw - Capacity 500 l / 320 kg      Code 3.028486
Dimensions (H x W x D) mm 1520 x 962 x 962
Plates heat exchanger kit for AUDAX connection to MAGIS HERCULES     Code 3.023355

To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.

Pressure - temperature safety valve kit for NATURAL SOL       Code 3.020342

Setted at 6 bar and 94 °C.

Rear connection kit     Code 3.020630

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Recessed buffer tank 50 litres     Code 3.027709
for installations in SOLAR CONTAINER
Recessed frame extension kit for CP4 XL/M Flat-Plate Collector        Code 3.023028
The kit includes: intermediate frame around collectors.
Recessed frame extension kit for CP4 XL/M Flat-Plate Collector        Code 3.023028
The kit includes: intermediate frame around collectors.
Recessed frame extension kit for CP4 XL/M Flat-Plate Collector        Code 3.023028
The kit includes: intermediate frame around collectors.
Recessed kit for 1 Flat-Plate Collector        Code 3.022213
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Recessed kit for 1 Flat-Plate Collector        Code 3.022213
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Recessed kit for 1 Flat-Plate Collector        Code 3.022213
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Recessed kit for 1 Flat-Plate Collector        Code 3.022213
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Recessed kit for 1 Vacuum Collector        Code 3.022215
Recessed installation on sloped roofs uses kits which allow integrating the CSV 14 Vacuum Collectors In-roof.
The collector is fixed directly on the roof (without using support frames) by means of fixing systems that must be provided according to the type of covering.
The kit includes: special waterproof trays, upper frame, waterproofing sheath.
Recirculation kit UB Inox 120-2     Code 3.022199
Only probe pipe.
Recirculation kit UB Inox 80-2     Code 3.022198
Only probe pipe.
Recirculation kit UB Inox Solar 200-2 and UB Inox 200-2       Code 3.022200
Only probe pipe.
Recirculation kit       Code 3.015380
Domestic hot water pump included.
Available for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24.

Recirculation kit        Code 3.020001

Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.
Recirculation kit for SUPER TRIO (pump not included)      Code 3.030483

 

 

 

Recirculation kit for VICTRIX ZEUS Superior kW       Code 3.013498

Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.

Recirculation kit for VICTRIX Zeus       Code 3.012944

Only probe pipe, not pump included.
Available for VICTRIX Zeus.

Recirculation kit with pump for MAGIS HERCULES     Code 3.023315

It's possible install this kit inside MAGIS HERCULES.

Recirculation kit without pump     Code 3.026169

For TRIO V2/MONO V2 PLUS, BASE e PRO and for MAGIS COMBO PLUS in SOLAR CONTAINER COMBO
The pump, not include, must be installed outside of the SOLAR CONTAINER, SOLAR CONTAINER COMBO or DOMUS CONTAINER

Recirculation pipe kit for 2 UB Inox 120-2 or 2 UB Inox 200-2 in parallel       Code 3.022201
Per due UB Inox 120-2 o due UB Inox 200-2 in parallelo.
SOLAR CONTAINER (recessed frame)       Code 3.020166

Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).

Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350

Safety kit DN 100 for VICTRIX PRO 80/100/120 in cascade      Code 3.023961
The kit includes thermometer, thermometer holder, lock, thermostat with manual reset, connection tap for pressure gauge, manual reset pressure switch, gas intercepting valve trap, expansion vessel connection and pressure switch for minimum pressure.
Insulation as standard.
Safety kit complete with pump and hydraulic separator for ARES 150 Tec      Code 3.023645
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit complete with pump and hydraulic separator for ARES 900 Tec     Code 3.023649
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit complete with pump and hydraulic separator for ARES Tec 200/250       Code 3.023646
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit complete with pump and hydraulic separator for ARES Tec 200/250       Code 3.023646
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit complete with pump and hydraulic separator for ARES Tec 300/350 kW      Code 3.023647
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit complete with pump and hydraulic separator from ARES Tec 440 kW to ARES Tec 770 kW      Code 3.023648
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit complete with pump and plate heat exchanger for ARES 660 Tec      Code 3.023653
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Safety kit complete with pump and plate heat exchanger for ARES 770 Tec      Code 3.023654
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Safety kit complete with pump and plate heat exchanger for ARES 900 Tec      Code 3.023655
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Safety kit complete with pump and plate heat exchanger for ARES Tec 150/200       Code 3.023650
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Safety kit complete with pump and plate heat exchanger for ARES Tec 250/350 kW      Code 3.023651
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Safety kit complete with pump and plate heat exchanger for ARES Tec 440/550 kW      Code 3.023652
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Safety kit G 2" ½ for VICTRIX PRO 35/55 in cascade      Code 3.023955
The kit includes thermometer, thermometer holder, lock, thermostat with manual reset, connection tap for pressure gauge, manual reset pressure switch, gas intercepting valve trap, expansion vessel connection and pressure switch for minimum pressure.
Insulation as standard.
Safety kit single boiler VICTRIX PRO      Code 3.023949
The kit includes thermometer, thermometer holder, lock, thermostatwith manual reset, connection tap for pressure gauge, manual reset pressure switch, gas intercepting valve trap, expansion vessel connection and pressure switch for minimum pressure. Insulation as standard.
Safety kit with filter for ARES 900 Tec - ARES PRO 600     Code 3.023658
The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.
Safety kit with filter for ARES PRO 150÷230      Code 3.028336
The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.
Safety kit with filter for ARES PRO 300÷500      Code 3.028337
The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.
Safety kit with filter from ARES Tec 150 kW to ARES Tec 350 kW      Code 3.023656
To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit with filter from ARES Tec 440 kW to ARES Tec 770 kW      Code 3.023657
To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety valve 7 bar and 12 litres expansion vessel kit     Code 3.025231
For RAPAX 200/300 V3 and 200/300 SOL V3
It can be fixed into wall thanks to brackets (as standard).
Safety valve 7 bar and 12 litres expansion vessel kit    Code 3.025231
For RAPAX 100 V2
It can be fixed into wall thanks to brackets (as standard).
Sanitary priority 3-way valve kit       Code 3.020633
Sheet metal casing for HYDRO IN 1000    Code 3.029880
Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1515 x 142 mm.
 
 
 
 
Sheet metal casing for HYDRO IN 200    Code 3.029876
Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 715 x 142 mm.
 
 
 
Sheet metal casing for HYDRO IN 400    Code 3.029877
Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 915 x 142 mm
 
 
 
 
Sheet metal casing for HYDRO IN 600    Code 3.029878
Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the ceiling in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1115 x 142 mm.
 
 
 
Sheet metal casing for HYDRO IN 800    Code 3.029879
Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1315 x 142 mm.
 
 
 
Sheet metal feet kit    Code 3.028506
Ideal to cover pipes from the floor.
 
 
 
Shut off knobs       Code 3.5324

For wall-hung outdoor boilers.

 

 

Shut off knobs water and gas for water heater    Code 3.027712

For water heaters.

Shut off knobs with filter       Code 3.015854

For wall-hung boilers and MAGIS VICTRIX ErP.

Shut-off knobs       Code 3.014948

Kit optional da abbinare al DIM comprensivo di n. 2 rubinetti.

Single solar pump station (1-6 l/min) ErP        Code 3.025662
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Single solar pump station (2-12 l/min) ErP       Code 3.025663
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Solar collector probe       Code 3.019374
To be used to manage the solar system coupled to thermal plants using the cascade and zone regulator.
Solar collector probe       Code 3.019374
To be used to manage the solar system coupled to thermal plants using the cascade and zone regulator.
Solar connection kit for MAGIS HERCULES     Code 3.023339

Installabile all'interno di MAGIS HERCULES ErP.

Solar kit      Code 3.024719
Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
Solar kit for SUPER TRIO    Code 3.030482
Solar kit composed by: plate heat exchanger, single solar
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).
Solar panel connection kit for UB Inox 120-2      Code 3.022197
Including pipes and fittings for connection in template.
Solar panel connection kit for UB Inox 200-2      Code 3.022195
Including pipes and fittings for connection in template.
Solar panel connection kit for UB Inox 200-2 or UB Inox 120-2 in parallel     Code 3.022196

Including pipes and fittings for connection in template.

Solar panel kit for HERCULES Condensing ErP       Code 3.019998

It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.

Solar valve        Code 3.018911
Allows the connection between combi boiler and solar system.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO and NIKE/EOLO Star.
Storage tank connection kit for VICTRIX Superior TOP 32 X E       Code 3.022848
Storage tank connection kit for VICTRIX X TT ErP     Code 3.024609

Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.

Storage tank sensor kit (for managing the storage tank as a zone)       Code 3.015268

For the storage tank unit managed as a zone (with a circulator) and connected to the cascade regulator (without external 3-way valve). For solar installations managed with cascade and zone regulator two probes are necessary.

System filling pump station       Code 3.018742
Ideal for correctly filling the forced circulation solar system with the waterglycol solution.
Tank of glycol for CP4 XL/M Flat-Plate Collectors      Code 1.031756
The kit includes:
one 20 kg can of glycol and propylene already mixed and ready to use.
Antifreeze protection up to - 25 °C.
Tank of glycol for CP4 XL/M Flat-Plate Collectors and CSV 14 Vacuum Collectors       Code 1.031756
The kit includes:
one 20 kg can of glycol and propylene already mixed and ready to use.
Antifreeze protection up to - 25 °C.
Three-way valve kit connection to a separate storage tank VICTRIX PRO      Code 3.023950
The kit includes the storage tank probe. The power supply is 230 Vac.
Insulation as standard.
UB 300 V2     Code 3.028480

Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.

VICTRIX PRO Cabinet kit      Code 3.027188

Floor-standing cabinet, it can be installed outdoor.

Variable lenght air flow duct for HYDRO IN 1000    Code 3.029855
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwingAdjustable to adapt to the installation.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 
Variable lenght air flow duct for HYDRO IN 200    Code 3.029851
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 
Variable lenght air flow duct for HYDRO IN 400    Code 3.029852
Kit for ceiling built-in and for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 
Variable lenght air flow duct for HYDRO IN 600    Code 3.029853
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 
Variable lenght air flow duct for HYDRO IN 800    Code 3.029854
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 
Vent kit and fitting for Ø 22 mm pipe for horizontal CP4 XL/M Flat-Plate Collector        Cod. 3.022849
This kit is used in applications with horizontal CP4 XL/M Flat-Plate.
Vertical buffer tank with capacity of 50 litres     Code 3.027539
 
 
 
Vertical inertial storage tank 75 litre for MAGIS COMBO     Code 3.027288
For solutions with hybrid heat pumps MAGIS COMBO.
Wall-hung (with bracket option kit) or floor-standing installation.
Vibration dampening feet kit for AUDAX TOP 18 e 21 ErP     Code 3.027654 
Wall mounting brackets for AUDAX 6/8 and external units of MAGIS COMBO and MAGIS PRO     Code 3.022154
ZENITAIR MONO     Code 3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 
kit containing bottom guard for condensing boilers      Code 3.027341

For wall-hung condensing boilers.

¾" Mixing valve        Code 3.019099
Range 42-60 °C.
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 90 °C.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO, NIKE/EOLO Star, CAESAR 14 and Super CAESAR 17.
¾" nut kit for DN 16 steel pipe        Code 1.027255
For connection to solar collectors.
Ø 18 copper pipe connection kit for collectors        Code 3.019089
The kit includes:
double Ø 18 mm insulated 15 m long copper pipe integrated cable for solar collector temperature probe.
"Free standing" support frame kit VICTRIX PRO      Code 3.024246
Designed to resolve installation situations in which the wall of the furnace room is not usable. With this modular construction, it is necessary to order a kit for every boiler installed.
Approved also for installation outside the building.
QUALITY IN SERVICES
MADE IN ITALY
50 years of experience
OVER 6 MILLION BOILERS INSTALLED