 | Code | 3.025496 |
| | Heat output C.H. kW | 23,6 |
| | Heat output D.H.W. kW | 26,0 |
| | Dimensions (HxWxD) mm | 1970 x 600 x 750 |
| | Type | with storage tank of 200 litres |
| | Modulating heat output | 12 - 100% |
| | D.H.W. production (∆t 30°C) Continuous service l/min | 13,1 |
A
A
Floor standing, condensing boiler with built-in 200-liter stainless steel storage tank, connected to the solar circuit.
Nominal heat output: 26,0 kW DHW and 23,6 kW central heating.
It includes all components to be connected to solar collectors for the domestic hot water production.
The 200-liter stainless steel storage tank guarantees a great production of domestic hot water, making HERCULES SOLAR 26 2 ErP the ideal solution in those installation systems where several domestic hot water withdrawals are required at the same time and especially where Jacuzzis are installed. It allows the management of mixed-zones systems, thanks to the wide offer of optional kits that can be directly installed inside the boiler.
The pumps provided as standard with the boiler and the optional ones, along with the kit, are low electric consumption and allow maximum energy savings.
The wide and functional liquid crystals backlit display, allows an easy and immediate visualization of the main functioning information. The advanced electronics allows control of the solar circuit.
Thanks to low emissions of carbon monoxide (CO) and nitrogen oxide (NOX), HERCULES SOLAR 26 2 ErP belongs to class 5, the most environmentally-friendly class established by the European standards (UNI EN 297 e 483).
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* as standard
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* as standard
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
For buildings not equipped with telephone network. Available for all Immergas models.
For buildings equipped with telephone network. Available for all Immergas models.
Available for: all Superior models and VICTRIX, VICTRIX TT, VICTRIX X, VICTRIX R, HERCULES, MAIOR EOLO and EOLO Extra kW.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
Lunghezza 956 mm, estensione massima 12,9 metri.
Utilizzabile solo per caldaie a condensazione < 35 kW.
Twin pipes complete kit Ø 80/80 Code 3.012002
For condensing boiler < 35 kW.
Terminal vertical outlet kit Ø 80 Code 3.015256
For condensing boiler < 35 kW.
Anti-wind vertical terminal kit Ø 80 Code 3.021721
For condensign boiler < 35 kW.
HERCULES Condensing B22 - B23 terminal kit Code 3.020004
Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Hydraulic manifold and 1 low-consumption pump.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Modulating low consumption pumps.
Modulating low consumption pumps.
Modulating low consumption pump.
To be used to manage the recirculation pump.
Recirculation kit Code 3.020001
It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES CONDENSING ErP.
For floor standing boilers: compact condensate drain pump kit.
