Heat pump for recessed or in-house installation
New only electric solution “all-in-one”. Complete with
spli type heat pump and electric resistances, represents
a single code system for heating/cooling systems and
production of domestic hot water.
• Remote control panel (with chronothermostat
function) as standard
• 160 litre storage tank with double coil in series, in
stainless steel AISI 316 L, class C, complete of 1,5 kW
electric resistance, 2 magnesium anodes, insulation
and flange of inspection
• Domestic hot water production with storage tank
unit managed by the heat pump and the electrical
resistance
• 25 litres buffer tank in stainless steel with function of
hydraulic separator, pump for 1 direct zone, “Y” filter,
D.H.W. expansion vessel 8 litres, system flow meter,
D.H.W. safety valve 8 bar
• Hydronic group linked to the operation of the heat
pump (R32 /water exchanger, circulator, 3 way valve)

Temperature control class V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%

To be used with radiant systems that also work in cooling mode.

To be used with radiant systems that also work in cooling mode
Temperature control class V or VI*
Contribution to seasonal space heating energy efficiency
3% or 4%*
* default settings

To be used when external probe as standard in outdoor unit is not correctly exposed.
Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%
* default settings

ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings

ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings






Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365








Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350



for DIM 2/3 zone ErP, kit code 3.021527 and code 3.021528.


including fittings, 4 shut-off knobs and predisposition to
insert the “Y” filters for zone 1 and 2

including fittings, 4 shut-off knobs and predisposition to
insert the “Y” filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y” filters for zone 1 and 2



Per TRIO PACK ELECTRIC-TRIO HYDRO sistema ELECTRIC.


station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)

Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
For connection R32 toward the lower part of the Container


