|
Code | 3.025563 |
|
|
Heating output kW | 17,10 |
|
|
Cooling output kW | 20,20 |
|
|
Dimensions (HxWxD) mm | 1579 x 1109 x 555 |
|
|
Refrigerant gas | R410A |
|
|
COP | 4,10 |
|
|
EER | 3,80 |
|
|
Weight (kg) | 191 |
A+
A+
Air to water inverter threephase heat pump.
17,10 kW heating output and 20,20 kW cooling output.
The AUDAX TOP air to water heat pumps are mono-bloc appliances that use outdoor air as a partially renewable heat source by transferring its thermal energy content to the central heating system. This very peculiar operation allows to reach leaving water temperature up to 60 °C, making AUDAX TOP heat pumps the ideal solution for both heating and cooling purposes and, moreover for DHW production, when combined with dedicated, separate storage tanks.
All the products in the range are equipped with built-in new low energy consumption circulation pumps and a separate control panel, supplied as standard, fit for in room installation, for the easiest and most comfortable system managent. Furthermore, the inverter technology operated built-in compressor allows a very fine power output modulation control, together with reduction of the power input, succeeding in very good performances for a higher and higher quality in indoor living conditions.
AUDAX TOP 18 ErP can be installed in stand-alone configuration or combined with a boiler working as an integrated systems, or, moreover, joined together in cascade installations. All the products in the range are certified for fully open air installation. Heat pumps best performances in heating are available in 45-50 °C maximum leaving-water-temperature conditions; otherwise, during the summer season, they represent the ideal appliance for cooling purposes, feeding fan coils systems or, as an alternative, radiant cooling systems (for floor, wall or ceiling) combined with dehumidifiers.
Threephase versions are designed for existing or new buildings, offices air conditioning.
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
To be used with radiant systems that also work in cooling mode.
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
only for system controller
only for system controller
Allows to check the DHW temperature of a commercial Storage Tank Unit with the Immergas boiler <35 kW.
Provided as per standard on all Storage Tank Units in the catalogue.
Wall-hung or recessed installation. Low consumption pumps.
Wall-hung or recessed installation. Low consumption pumps.
for DIM 2/3 zone ErP, kit code 3.021527 and code 3.021528.
UNA GRANDE SICUREZZA IN PIÙ
5 anni di estensione di garanzia per pompe di calore e sistemi ibridi Immergas con garanzia di intervento di Centri Assistenza certificati F-Gas.
CON ATTIVAZIONE GRATUITA
5 anni di estensione di garanzia senza costi di attivazione per caldaie Immergas inferiori a 35 kW, con possibilità di estenderla fino a 10.
PIÙ SICUREZZA PER GRANDI IMPIANTI
5 anni di estensione di garanzia per le caldaie di Alta Potenza Immergas tra 36 e 200 kW destinate agli impianti più grandi.
O TUTTI E DUE?
Come approfittare dei vantaggi di due iniziative per un’occasione irripetibile.
Detrazioni e incentivi permettono di avere la qualità Immergas in modo più conveniente anche nel 2020. Tutte le soluzioni da scegliere in vigore.
