|
Code | 3.030607 |
|
|
Heating output kW | 6,00 |
|
|
Cooling output kW | 6,50 |
|
|
Hydronic Unit (HxWxD) mm | 760 x 440 x 250 |
|
|
Condensing Unit (HxWxD) mm | 638 x 880 x 364 |
|
|
Refrigerant gas | R32 |
|
|
COP | 4,92 |
|
|
EER | 4,42 |
|
|
External unit empty appliance (kg) | 47,5 |
|
|
Hydronic unit empty appliance (kg) | 33,5 |
A+
A++
Spilt type reversible air-to-water inverter driven heat pump system composed by an outdoor condensing unit and a indoor hydronic unit
Heating output kW : 6,00; Cooling output kW : 6,50
New MAGIS PRO V2 heat pump system range are air-to-water appliances, designed to exploit outdoor air as renewable energy source. Such a kind of appliances are the ideal solution for central heating (maximum delivery temperature equal to 65 °C), cooling and domestic hot water production, thanks to the possible coupling with a separate storage tank unit. The “PRO” designation underlines the particular degreee of competence of the professional people involved in the design and installation process, to whom such a kind of technical solution is addressed; for instance, the completion of the refrigerant circuit and the connection between outdoor unit and the hydronic one, implies the posses for the installer of a spefic qualification (the so called F-Gas licence). Inverter driven compressor allows wide power-modulation range and low current absortion, succeeding in high level performances for more comfortable indoor climatic conditions.
New features:
• Pre-loaded refrigerant fluid R32
• High COP and EER values
• Maximum delivery temperature 65 °C
• Pre-arranged to manage up to 3 zones system
MAGIS PRO V2 are domestic-purpose-suit systems, and they are the ideal solution in new, high energy class buildings, even when located in extremely cold areas, with very low outdoor-winter-temperatures.
The very compact external unit (smaller than the most of hydronic heat pump models), installable both on balcony or fully outdoor, allows to MAGIS PRO SYSTEM enhanced positional flexibility together with a minimal aestethic effect on the overall style.
MAGIS PRO V2 can be installed in stand alone configuration, or combined with a boiler and other renewable energy sources in integrated or hybrid, compact systems, working in central heating, cooling and/or DHW production
Temperature control class V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
To be used with radiant systems that also work in cooling mode.
To be used when external probe as standard in outdoor unit is not correctly exposed.
Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%
* default settings
To be used with radiant systems that also work in cooling mode
Temperature control class V or VI*
Contribution to seasonal space heating energy efficiency
3% or 4%*
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Allows to check the DHW temperature of a commercial Storage Tank Unit with the Immergas boiler <35 kW.
Provided as per standard on all Storage Tank Units in the catalogue.
in the case of pipes coming out from the wall on the
internal unit
Kit to be used without system manager controller. Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Power supply 230 or 400 Vac.
Power supply 230 or 400 Vac.
Anti freeze protection kit -15 °C
For TT versions, EXA, TERA, OMNIA, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS, MAGIS PRO V2 and MAGIS COMBO V2.
for external unit of AUDAX 6-8-12-16-16 MONO and AUDAX PRO 4-6 V2
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
UNA GRANDE SICUREZZA IN PIÙ
5 anni di estensione di garanzia per pompe di calore e sistemi ibridi Immergas con garanzia di intervento di Centri Assistenza certificati F-Gas.
CON ATTIVAZIONE GRATUITA
5 anni di estensione di garanzia senza costi di attivazione per caldaie Immergas inferiori a 35 kW, con possibilità di estenderla fino a 10.
PIÙ SICUREZZA PER GRANDI IMPIANTI
5 anni di estensione di garanzia per le caldaie di Alta Potenza Immergas tra 36 e 200 kW destinate agli impianti più grandi.
O TUTTI E DUE?
Come approfittare dei vantaggi di due iniziative per un’occasione irripetibile.
Detrazioni e incentivi permettono di avere la qualità Immergas in modo più conveniente anche nel 2020. Tutte le soluzioni da scegliere in vigore.
