RAPAX 100 V2

Heat pump water heater
The customer service provides
prompt answers within 24 hours.
3 star marking sanitary comfort
User-friendly interface
Easy installation

Technical data RAPAX 100 V2

Code 3.028366
D.H.W. Energy class - Stated load profile A+ / M
Capacity (litre) 100
Heating pump nominal power output kW 0,96
Dimensions (HxWxD) mm 1209 x 522 x 538
Refrigerant gas R134A
COP 15°C 2,75
COP 7°C 2,47

Technical data RAPAX 100 V2

Code 3.028366
D.H.W. Energy class - Stated load profile A+ / M
Capacity (litre) 100
Heating pump nominal power output kW 0,96
Dimensions (HxWxD) mm 1209 x 522 x 538
Refrigerant gas R134A
COP 15°C 2,75
COP 7°C 2,47

Gallery

RAPAX 100 V2 heat pump water heater can completely eliminate the use of gas for domestic hot water because they apply the same principle as heat pumps.
This is one of the new, effective solutions designed by Immergas to make the best use of renewable energy sources.

RAPAX 100 V2 heat pump water heater has a 100 litre insulated enamelled steel storage tank and can be installed even in a garage, laundry or storeroom.


The RAPAX range is ideal when renovating and creating heating systems in detached houses to produce domestic hot water with renewable energy sources. It is an excellent alternative to solar energy and can be used in systems designed for operation without gas for the production of domestic hot water and, combined with a heat pump, to provide air conditioning.

All RAPAX are equipped with specific features to enhance performance of the photovoltaic system.

...

2 x 45° bend kit Ø 125   Cod.3.016180

For RAPAX 100 V2.
 

...

87° bend kit Ø 125   Cod.3.016179

For RAPAX 100 V2.
 

...

Extension pipe kit Ø 125 0,5 m long   Cod.3.016370

For RAPAX 100 V2 
 

 

 

...

Extension pipe kit Ø 125 1 m long   Cod.3.016371

For RAPAX 100 V2.
 

...

Extension pipe kit Ø 125 2 m long   Cod.3.015250

For RAPAX 100 V2.
 

...

Inlet/exhaust pipes insulation kit   Cod.3.028371

For RAPAX 100 V2

Composed by:

• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm

 

...

HYDRO IN 200   Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 400   Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 600   Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 800   Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 1000   Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 
...

Safety valve 7 bar and 12 litres expansion vessel kit   Cod.3.028368

For RAPAX 100 V2
It can be fixed into wall thanks to brackets (as standard).

RAPAX 100 V2 heat pump water heater can completely eliminate the use of gas for domestic hot water because they apply the same principle as heat pumps.
This is one of the new, effective solutions designed by Immergas to make the best use of renewable energy sources.

RAPAX 100 V2 heat pump water heater has a 100 litre insulated enamelled steel storage tank and can be installed even in a garage, laundry or storeroom.


The RAPAX range is ideal when renovating and creating heating systems in detached houses to produce domestic hot water with renewable energy sources. It is an excellent alternative to solar energy and can be used in systems designed for operation without gas for the production of domestic hot water and, combined with a heat pump, to provide air conditioning.

All RAPAX are equipped with specific features to enhance performance of the photovoltaic system.

...

2 x 45° bend kit Ø 125   Cod.3.016180

For RAPAX 100 V2.
 

...

87° bend kit Ø 125   Cod.3.016179

For RAPAX 100 V2.
 

...

Extension pipe kit Ø 125 0,5 m long   Cod.3.016370

For RAPAX 100 V2 
 

 

 

...

Extension pipe kit Ø 125 1 m long   Cod.3.016371

For RAPAX 100 V2.
 

...

Extension pipe kit Ø 125 2 m long   Cod.3.015250

For RAPAX 100 V2.
 

...

Inlet/exhaust pipes insulation kit   Cod.3.028371

For RAPAX 100 V2

Composed by:

• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm

 

...

HYDRO IN 200   Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 400   Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 600   Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 800   Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 1000   Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 
...

Safety valve 7 bar and 12 litres expansion vessel kit   Cod.3.028368

For RAPAX 100 V2
It can be fixed into wall thanks to brackets (as standard).

Contacts

Contact us
Customer Care