Thermoregulation

2 relays board kit

Cod.3.031943

For TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.

Thermoregulation

2 relays board kit

Cod.3.026302

To be installed for the deumidifiers management without in absence of system manager kit.

Dedicated to MAGIS PRO V2 and MAGIS COMBO V2

 

 

Thermoregulation

CRONO 7 (weekly digital chronothermostat)

Cod.3.021622

ON/OFF room thermostat.

 

Thermoregulation

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

Thermoregulation

DOMINUS V2 interface kit

Cod.3.034903

For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range. 
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).

Thermoregulation

Expansion kit

Cod.3.031944

For TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.

Thermoregulation

External probe

Cod.3.014083

Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
 

Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%

* as standard

Thermoregulation

External probe

Cod.3.015266

For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

 

Thermoregulation

GSM telephonic control

Cod.3.017182

For buildings not equipped with telephone network. 

Thermoregulation

Low temperature safety thermostat kit

Cod.3.019229

For generators settled up with low temperature

Thermoregulation

Mod-bus temperature and humidity sensor

Cod.3.030992

To be used with radiant systems that also work in cooling mode 

 

Thermoregulation

Relay board kit

Cod.3.015350

Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
 
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2

Thermoregulation

Remote Control Panel

Cod.3.030863

Modulating chronotermostat, remote control with temperature/humidity sensor
 

Thermoregulation

Remote control kit

Cod.3.023364

Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
 
* as standard

Thermoregulation

Room hygrostat

Cod.3.023302

To be used with radiant systems that also work in cooling mode.

Thermoregulation

Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP

Cod.1.028812

As per standard with these products.

Thermoregulation

Solar probe kit

Cod.3.021452

For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
 

Thermoregulation

Storage tank NTC probe

Cod.3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

Thermoregulation

System controller

Cod.3.021522

Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
 
* as standard

Thermoregulation

System delivery probe kit

Cod.3.030913

Thermoregulation

Telephonic control

Cod.3.013305

For buildings equipped with telephone network. 

Thermoregulation

Temperature/humidity active sensor kit

Cod.3.021524

To be used with radiant systems that also work in cooling mode.

Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*

* as standard

Thermoregulation

2 relays board kit

Cod.3.026302

To be installed for the deumidifiers management without in absence of system manager kit.

Dedicated to MAGIS PRO V2 and MAGIS COMBO V2

 

 

Thermoregulation

CRONO 7 (weekly digital chronothermostat)

Cod.3.021622

ON/OFF room thermostat.

 

Thermoregulation

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

Thermoregulation

DOMINUS V2 interface kit

Cod.3.034903

For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range. 
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).

Thermoregulation

EMR 12 VDC relay kit

Cod.3.023945

only for system controller

Thermoregulation

External probe

Cod.3.015266

For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

 

Thermoregulation

Low temperature safety thermostat kit

Cod.3.019229

For generators settled up with low temperature

Thermoregulation

Mod-bus temperature and humidity sensor

Cod.3.030992

To be used with radiant systems that also work in cooling mode 

 

Thermoregulation

Probe kit for MAGIS M4-30

Cod.3.033324

To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.

Thermoregulation

Relay board kit

Cod.3.015350

Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
 
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2

Thermoregulation

Remote Control Panel

Cod.3.030863

Modulating chronotermostat, remote control with temperature/humidity sensor
 

Thermoregulation

Remote control kit

Cod.3.023364

Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
 
* as standard

Thermoregulation

Room hygrostat

Cod.3.023302

To be used with radiant systems that also work in cooling mode.

Thermoregulation

SSR 6 VDC relay kit

Cod.3.023946

only for system controller

Thermoregulation

Solar probe kit

Cod.3.021452

For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
 

Thermoregulation

Storage tank NTC probe

Cod.3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

Thermoregulation

System controller

Cod.3.021522

Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
 
* as standard

Thermoregulation

System controller expansion kit

Cod.3.021547

 

 

Thermoregulation

System controller expansion kit

Cod.3.029912

 

 

Thermoregulation

System delivery probe kit

Cod.3.030913

Thermoregulation

Temperature/humidity active sensor kit

Cod.3.021524

To be used with radiant systems that also work in cooling mode.

Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*

* as standard

Thermoregulation

4 speeds thermoregulation kit

Cod.3.028510

includes control panel and probe NTC air.
For installation on the machine, with adjustment
speed on 4 steps.
 

Thermoregulation

Electronic control board with 0-10 V connection

Cod.3.028512

It allows to manage the fan motor, with modulating speed.
 

Thermoregulation

Modulating thermoregulation kit

Cod.3.028509

includes control panel with display, electronic board and NTC air probe.
For installation on the machine, allows the room
temperature adjustment using 4 types of programs:
Auto, Silent, Night and Max.

Thermoregulation

On board electronic control with PID full modulating fan

Cod.3.030876

To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.

Thermoregulation

Smart touch wall controller with temperature probe (black casing)

Cod.3.030877

The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.

Thermoregulation

Smart touch wall controller with temperature probe (white casing)

Cod.3.030878

The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
 
 

Thermoregulation

Universal control board for commercial thermoregulation

Cod.3.028511

For installation on the machine, allows to manage the fan motor, with fixed speeds.
 

Thermoregulation

24V Power pack kit

Cod.3.028339

To be inserted in the control panel.

Thermoregulation

CRONO 7 (weekly digital chronothermostat)

Cod.3.021622

ON/OFF room thermostat.

 

Thermoregulation

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

Thermoregulation

Cascade and zone regulator kit

Cod.3.015244

ON-OFF adjustment, modulation and malfunctions of the VICTRIX PRO in cascade (max 8). It can manage any climatic zone regulators in the system (max 3 plus 1 dedicated to the hot tap water circuit).

Thermoregulation

Cascade and zone regulator kit

Cod.3.034119

It can manage 3 water distribution zones plus an external storage tank unit
and thermal solar for DHW production, both in standalone and cascade
configurations. It includes power supply connection for installation on a DIN
rail.

Thermoregulation

Cascade regulator kit for ARES PRO - TEC ErP

Cod.3.028340

It can manage up to 8 boilers in cascade.
Composed by:
• HSCP viewer/programmer
• BCM board
• 24V power supply
• external probe
• puffer probe

Thermoregulation

Clip-in for VICTRIX PRO V2

Cod.3.034122

To be used together with Cascade and Zones regulator kit (1 for each boiler).

Thermoregulation

Expansion kit for Cascade and Zones regulator kit

Cod.3.034124

To be used to manage 1 additional zone (direct or mixed) up to a maximum
of 5.

Thermoregulation

External probe

Cod.3.015266

For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

 

Thermoregulation

External probe kit (for cascade installation)

Cod.3.024511

Paired with cascade and zone regulator kit, it optimizes energy
consumption by adjusting the plant delivery temperature for variable
temperature functioning 

Thermoregulation

Flow probe kit

Cod.3.015267

To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available

Thermoregulation

GSM telephonic control

Cod.3.017182

For buildings not equipped with telephone network. 

Thermoregulation

Modulating room thermostat

Cod.3.015245

Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.

Thermoregulation

Remote control for single VICTRIX PRO V2

Cod.3.020358

This is a modulating control unit that serves to optimize climatic
management of the temperature in rooms.
It can only be used on systems with a single temperature control.

Thermoregulation

SHC multifunction board kit

Cod.3.028338

It allows to integrate 3 more user circuits for each kits up to 4 kit (max 12 supplementary circuits).
N.B. 1 multifunction kit (not connected) is supplied as standard with the boiler.

Thermoregulation

Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP

Cod.1.028812

As per standard with these products.

Thermoregulation

System delivery probe kit for the boiler VICTRIX PRO V2

Cod.3.024245

Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.

Thermoregulation

Tele-management kit 2.0

Cod.3.029832

Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.

Thermoregulation

Tele-management kit 2.0

Cod.3.034121

It works together with the Cascade and Zones regulator kit. It allows remote
management of the device with a dedicated APP.

Thermoregulation

Telephonic control

Cod.3.013305

For buildings equipped with telephone network. 

Thermoregulation

VICTRIX SUPERIOR 35 PLUS and VICTRIX TERA 35 PLUS EU cascade kit

Cod.3.020355

To match VICTRIX SUPERIOR 35 PLUS and VICTRIX TERA 35 PLUS V2 EU in cascade
Electric interface Gas boiler-Cascade and zones regulator kit; it is necessary one interface each gas boiler.

Thermoregulation

Wall box kit for cascade and zone regulator

Cod.3.015265

If the cascade and zone regolator is not install inside an electrical box.

Thermoregulation

Zone manager kit

Cod.3.015264

Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone, and allow remote control of the cascade and zone regulator.

Thermoregulation

Zone manager kit

Cod.3.034120

Modulating temperature control, backlit display and remote management of
the zone. It works together with the Cascade and Zones regulator kit.

Thermoregulation

CARV2 (weekly chronothermostat and modulating remote control)

Cod.3.021395

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Thermoregulation

CARV2 WIRELESS (radio wave weekly chronothermostat and modulating remote control)

Cod.3.021623

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Thermoregulation

CRD PLUS (weekly chronothermostat and modulating remote control)

Cod.3.032645

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Thermoregulation

CRONO 7 (weekly digital chronothermostat)

Cod.3.021622

ON/OFF room thermostat.

 

Thermoregulation

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

Thermoregulation

Electrical box cover plate kit for SMARTECH PLUS

Cod.3.031013

It allows the covering of the wall hole for electrical boxes type 503.

Thermoregulation

Expansion kit for SMARTECH PLUS

Cod.3.030911

For controlling the temperature in several areas of the house (example living and sleeping areas).

The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).

 

Thermoregulation

External probe

Cod.3.014083

Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
 

Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%

* as standard

Thermoregulation

GSM telephonic control

Cod.3.017182

For buildings not equipped with telephone network. 

Thermoregulation

MINI CRD (MINI weekly chronothermostat and modulating remote control)

Cod.3.020167

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Thermoregulation

Multi-zone electronic board

Cod.3.028444

It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).

For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.

Thermoregulation

Relay board kit

Cod.3.015350

Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
 
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2

Thermoregulation

Room thermostat

Cod.3.012287

Simple thermostat for the manual regulation of the temperature. Available for all models.

Thermoregulation

SMARTECH PLUS - SMART remote control

Cod.3.030909

Hi-tech smart wireless remote control with Bluetooth technology

The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20

 

Thermoregulation

Solar probe kit

Cod.3.021452

For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
 

Thermoregulation

Telephonic control

Cod.3.013305

For buildings equipped with telephone network. 

Thermoregulation

CARV2 (weekly chronothermostat and modulating remote control)

Cod.3.021395

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Thermoregulation

CARV2 WIRELESS (radio wave weekly chronothermostat and modulating remote control)

Cod.3.021623

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Thermoregulation

CRD PLUS (weekly chronothermostat and modulating remote control)

Cod.3.032645

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Thermoregulation

CRONO 7 (weekly digital chronothermostat)

Cod.3.021622

ON/OFF room thermostat.

 

Thermoregulation

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

Thermoregulation

Cascade and zone regulator kit

Cod.3.015244

ON-OFF adjustment, modulation and malfunctions of the VICTRIX PRO in cascade (max 8). It can manage any climatic zone regulators in the system (max 3 plus 1 dedicated to the hot tap water circuit).

Thermoregulation

DOMINUS V2 interface kit

Cod.3.034903

For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range. 
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).

Thermoregulation

Electrical box cover plate kit for SMARTECH PLUS

Cod.3.031013

It allows the covering of the wall hole for electrical boxes type 503.

Thermoregulation

Expansion kit for SMARTECH PLUS

Cod.3.030911

For controlling the temperature in several areas of the house (example living and sleeping areas).

The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).

 

Thermoregulation

External probe

Cod.3.014083

Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
 

Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%

* as standard

Thermoregulation

External probe kit (for cascade installation)

Cod.3.024511

Paired with cascade and zone regulator kit, it optimizes energy
consumption by adjusting the plant delivery temperature for variable
temperature functioning 

Thermoregulation

Flow probe kit

Cod.3.015267

To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available

Thermoregulation

GSM telephonic control

Cod.3.017182

For buildings not equipped with telephone network. 

Thermoregulation

Low temperature safety thermostat kit

Cod.3.019229

For generators settled up with low temperature

Thermoregulation

MINI CRD (MINI weekly chronothermostat and modulating remote control)

Cod.3.020167

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Thermoregulation

Modulating room thermostat

Cod.3.015245

Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.

Thermoregulation

Multi-zone electronic board

Cod.3.028444

It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).

For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.

Thermoregulation

Relay board kit

Cod.3.015350

Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
 
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2

Thermoregulation

Room thermostat

Cod.3.012287

Simple thermostat for the manual regulation of the temperature. Available for all models.

Thermoregulation

SMARTECH PLUS - SMART remote control

Cod.3.030909

Hi-tech smart wireless remote control with Bluetooth technology

The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20

 

Thermoregulation

Safety thermostat kit

Cod.3.019869

For HERCULES Condensing and HERCULES Solar.

Thermoregulation

Solar probe kit

Cod.3.021452

For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
 

Thermoregulation

Storage tank NTC probe

Cod.3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

Thermoregulation

Super CAR (weekly thermostat and modulating remote control)

Cod.3.016577

Available for: All Superior models and VICTRIX Zeus, HERCULES, ZEUS kW, AVIO kW, NIKE Mini 28 kW Special.

Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Thermoregulation

System delivery probe kit

Cod.3.030913

Thermoregulation

Tele-management kit 2.0

Cod.3.029832

Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.

Thermoregulation

Telephonic control

Cod.3.013305

For buildings equipped with telephone network. 

Thermoregulation

Wireless room sensor kit

Cod.3.030906

Ideal for reading the room temperature of second or third zone.

To be matched to sensor receiver code 3.030908.

 

 

Thermoregulation

Wireless room sensors receiver kit

Cod.3.030908

The kit includes 1 room sensor and one receiver for the dialogue between boiler and room sensor.
 

 

 

Thermoregulation

Zone control unit V2 kit

Cod.3.030912

Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).

Thermoregulation

Zone manager kit

Cod.3.015264

Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone, and allow remote control of the cascade and zone regulator.

Thermoregulation

CARV2 (weekly chronothermostat and modulating remote control)

Cod.3.021395

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Thermoregulation

CRD PLUS (weekly chronothermostat and modulating remote control)

Cod.3.032645

Class of device V* or VI

Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

*as standard

Thermoregulation

CRONO 7 (weekly digital chronothermostat)

Cod.3.021622

ON/OFF room thermostat.

 

Thermoregulation

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

Thermoregulation

Electrical box cover plate kit for SMARTECH PLUS

Cod.3.031013

It allows the covering of the wall hole for electrical boxes type 503.

Thermoregulation

Expansion kit for SMARTECH PLUS

Cod.3.030911

For controlling the temperature in several areas of the house (example living and sleeping areas).

The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).

 

Thermoregulation

External probe

Cod.3.014083

Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
 

Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%

* as standard

Thermoregulation

Low temperature safety thermostat kit

Cod.3.019229

For generators settled up with low temperature

Thermoregulation

SMARTECH PLUS - SMART remote control

Cod.3.030909

Hi-tech smart wireless remote control with Bluetooth technology

The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20

 

Thermoregulation

Safety thermostat kit

Cod.3.019869

For HERCULES Condensing and HERCULES Solar.

Thermoregulation

Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP

Cod.1.028812

As per standard with these products.

Thermoregulation

Super CAR (weekly thermostat and modulating remote control)

Cod.3.016577

Available for: All Superior models and VICTRIX Zeus, HERCULES, ZEUS kW, AVIO kW, NIKE Mini 28 kW Special.

Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%

* as standard

Thermoregulation

Telephonic control

Cod.3.013305

For buildings equipped with telephone network. 

Thermoregulation

PRO solar central unit

Cod.3.034595

Advanced central unit, capable of managing special systems (such as two sets of collectors on double-pitched roofs, heating systems integration, heating integration for swimming pools etc.). Supplied as per standard with four probes, to be able to control two different ΔT based on the type of system required.
It is supplied as per standard in combined solar packs for heating and domestic hot water integration.

Thermoregulation

Solar central unit kit

Cod.3.019097

It includes probes for solar panels and storaga tank. Backlighted display.

Can be integrated to UB INOX 120 V2 and UB INOX 200 V2.

Thermoregulation

Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP

Cod.1.028812

As per standard with these products.

Thermoregulation

Solar probe kit

Cod.3.021452

For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
 

Thermoregulation

Storage tank NTC probe

Cod.3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

Flue systems

1 extension pipe Ø 60/100 0,3 m long with inspection hole

Cod.3.014418

Flue components for traditional boilers and water heaters.

Flue systems

1 extension pipe Ø 60/100 0,5 m long

Cod.3.018278

Flue components for traditional boilers and water heaters.

Flue systems

1 extension pipe Ø 60/100 1 m long

Cod.3.018277

Flue components for traditional boilers and water heaters.

Flue systems

90° bend Ø 60/100

Cod.3.018279

Flue components for traditional boilers and water heaters.

Flue systems

90° bend Ø 60/100 with inspection hole

Cod.3.016172

Flue components for traditional boilers and water heaters.

Flue systems

90° bend Ø 80 with inspection hole

Cod.3.016175

Flue components for traditional boilers and water heaters.

Flue systems

90° bend Ø 80/125 with inspection hole

Cod.3.016171

Flue components for traditional boilers and water heaters.

Flue systems

Concentric horizontal anti-freeze complete kit Ø 60/100

Cod.3.018210

Flue components for traditional boilers and water heaters.

Flue systems

Concentric horizontal complete kit Ø 60/100

Cod.3.017736

Flue components for traditional boilers and water heaters.

Flue systems

Condense tank kit Ø 60/100

Cod.3.016173

Flue components for traditional boilers and water heaters.

Flue systems

Female/female 90° bend Ø 80

Cod.3.011571

Flue components for traditional boilers and water heaters.

Flue systems

Flanged bend Ø 60/100

Cod.3.011139

Flue components for traditional boilers and water heaters.

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for VICTRIX PRO 35/55/60/68/80 V2

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for condensing boilers

Flue systems

2 x 45° Bend kit Ø 80/125

Cod.3.015248

Flue systems

4 extension pipes Ø 80 kit 0,5 m long

Cod.3.014642

for condensing boilers

Flue systems

4 x 90° bends Ø 80 kit

Cod.3.012091

for condensing boilers

Flue systems

45° bend Ø 60/100 kit

Cod.3.012095

For condensing boiler < 35 kW.

Flue systems

45° bend Ø 80 kit

Cod.3.012092

for condensing boilers

Flue systems

87° Bend kit Ø 80/125

Cod.3.015247

Flue systems

90° bend terminal kit  Ø 50 (C5) for flexible ducting system

Cod.3.027357

Flexible chimney ducting system for condensing boilers.

Flue systems

90° bend Ø 60 for ducting system

Cod.3.013870

For condensing boilers < 35 kW.

Flue systems

90° bend Ø 60/100 kit

Cod.3.012093

For condensing boiler < 35 kW.

Flue systems

90° bend Ø 60/100 kit with inspection hole

Cod.3.016174

For condensing boiler < 35 kW.

Flue systems

Anti-wind vertical terminal kit Ø 80

Cod.3.021721

For condensing boiler < 35 kW.

Flue systems

Chimney hole closing panel

Cod.3.012008

Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.

Flue systems

Clapet kit for for collective flue systems operating under positive pressure

Cod.3.031599

For VICTRIX ZEUS SUPERIOR, VICTRIX SUPERIOR, VICTRIX MAIOR and VICTRIX EXTRA.

Flue systems

Components support kit Ø 50 mm for flexible ducting system

Cod.3.027355

Flexible chimney ducting system for condensing boilers.

Flue systems

Concentric horizontal complete kit Ø 60/100

Cod.3.012000

Max lenght 12,9 m.
For condensing boiler < 35 kW.

Flue systems

Concentric horizontal outlet Ø 60/100

Cod.3.016836

for condensing boilers < 35 kW.

Flue systems

Concentric vertical complete kit Ø 60/100 (black colour)

Cod.3.018501

For condensing boiler < 35 kW.

Flue systems

Concentric vertical complete kit Ø 60/100 (red ocher colour)

Cod.3.016833

for condensing boilers < 35 kW.

Flue systems

Cover kit for VICTRIX TERA V2/PLUS V2

Cod.3.032844

For external installations, in partially protected places

Flue systems

Cover kit for VICTRIX TERA/PLUS

Cod.3.027263

For external installations, in partially protected places

Flue systems

Extension pipe kit Ø 60/100 0,5 m long

Cod.3.014643

For condensing boiler < 35 kW.

Flue systems

Extension pipe kit Ø 60/100 1 m long

Cod.3.012089

For condensing boiler < 35 kW.

Flue systems

Extension pipe kit Ø 80/125 1 m long

Cod.3.018667

For VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.

Flue systems

Extension pipe kit Ø 80/125 2 m long

Cod.3.015246

for VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.

 

Flue systems

Flange Ø 60/100 coupling Ø 80/125 adapter kit

Cod.3.022990

To be used with the concentric kits.
For condensing boiler < 35 kW.

Flue systems

Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge

Cod.3.016365

For condensing boilers < 35 kW.

Flue systems

Flanged stub-pipe kit Ø 60/100

Cod.3.012086

For condensing boiler < 35 kW.

Flue systems

Flanged stub-pipe kit Ø 80

Cod.3.012087

For condensing boilers < 35 kW.

Flue systems

Flanged stub-pipe Ø 80 for flue discharge

Cod.3.016364

For condensing boilers < 35 kW.

Flue systems

Flexible ducting kit Ø 80 12m with spacers

Cod.3.027875

L=12 m + 4 centering spacers.
For condensing boilers.

Flue systems

Flexible hose kit Ø 50 mm L. 10 m

Cod.3.027354

Flexible chimney ducting system for condensing boilers.

Flue systems

Flexible/flexible adapter kit for flexible ducting system Ø 50

Cod.3.027359

Flexible chimney ducting system for condensing boilers.

Flue systems

Flexible/flexible adapter kit for flexible ducting Ø 80

Cod.3.027877

For condensing boilers.

Flue systems

Gasket kit Ø 125

Cod.3.015345

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80

Cod.3.015378

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80/125

Cod.3.015343

Flue systems

HERCULES Condensing B22 - B23 terminal kit

Cod.3.020004

For air intake from technical installation room. 
For HERCULES CONDENSING range

Flue systems

Horizontal concentric complete kit Ø 60/100 Short

Cod.3.024598

Max lenght 11,9 m.
For condensing boiler < 35 kW.

Flue systems

Horizontal concentric complete kit Ø 60/100 with swivel terminal

Cod.3.024267

Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.

Flue systems

Horizontal concentric kit Ø 80/125

Cod.3.030782

For condensing boiler < 35 kW.

Flue systems

Horizontal concentric swivel outlet Ø 60/100

Cod.3.027408

for condensing boilers < 35 kW.

Flue systems

Horizontal outlet terminal Ø 80

Cod.3.016363

For condensing boiler < 35 kW.

Flue systems

Pipe clamp kit for ducting system Ø 60

Cod.3.012145

5 pipe clamps Ø 60.
For condensing boilers < 35 kW.

Flue systems

Push-fitting extension pipes kit 1 m for ducting system Ø 60

Cod.3.012144

4 extension pipes Ø 60 2 m long.

For condensing boilers < 35 kW.

Flue systems

Push-fitting extension pipes kit 2 m for ducting system Ø 60

Cod.3.013869

1 extension pipe Ø 60 2 m long.

For condensing boilers < 35 kW.

Flue systems

Spacer pipe clamp kit for ducting system Ø 60

Cod.3.012146

3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.

Flue systems

Support bend kit for ducting system Ø 60

Cod.3.012153

Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.

Flue systems

Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80

Cod.3.027874

For condensing boilers.

Flue systems

Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80

Cod.3.027873

For condensing boilers.

Flue systems

Terminal vertical outlet kit Ø 80

Cod.3.015256

For condensing boiler < 35 kW.

Flue systems

Vertical concentric kit Ø 80/125

Cod.3.015243

For condensing boilers < 35 kW.

Flue systems

Vertical outlet kit for ducting system Ø 60

Cod.3.012112

Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.

Flue systems

Vertical outlet kit Ø 80/125 for flexible ducting Ø 80

Cod.3.027876

For condensing boilers.

Flue systems

Vertical terminal kit  Ø 80/125 for flexible ducting system Ø 50 (C5+C9)

Cod.3.027358

Flexible chimney ducting system for condensing boilers.

Flue systems

Vertical terminal outlet outdoor kit Ø 80

Cod.3.024295

(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable

Flue systems

Ø 80 "T-shaped" terminal kit  Ø 80 (C5) for flexible ducting system

Cod.3.027356

Flexible chimney ducting system for condensing boilers.

Flue systems

Ø 100 adapter kit for C9 ducting system

Cod.3.022032

For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.

Flue systems

Ø 125 adapter kit for C9 ducting system

Cod.3.022033

For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for VICTRIX PRO 35/55/60/68/80 V2

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for condensing boilers

Flue systems

4 extension pipes Ø 80 kit 0,5 m long

Cod.3.014642

for condensing boilers

Flue systems

4 x 90° bends Ø 80 kit

Cod.3.012091

for condensing boilers

Flue systems

45° bend Ø 60/100 kit

Cod.3.012095

For condensing boiler < 35 kW.

Flue systems

45° bend Ø 80 kit

Cod.3.012092

for condensing boilers

Flue systems

90° bend terminal kit  Ø 50 (C5) for flexible ducting system

Cod.3.027357

Flexible chimney ducting system for condensing boilers.

Flue systems

90° bend Ø 60 for ducting system

Cod.3.013870

For condensing boilers < 35 kW.

Flue systems

90° bend Ø 60/100 kit

Cod.3.012093

For condensing boiler < 35 kW.

Flue systems

Anti-wind vertical terminal kit Ø 80

Cod.3.021721

For condensing boiler < 35 kW.

Flue systems

Chimney hole closing panel

Cod.3.012008

Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.

Flue systems

Components support kit Ø 50 mm for flexible ducting system

Cod.3.027355

Flexible chimney ducting system for condensing boilers.

Flue systems

Concentric horizontal complete kit Ø 60/100

Cod.3.012000

Max lenght 12,9 m.
For condensing boiler < 35 kW.

Flue systems

Concentric horizontal outlet Ø 60/100

Cod.3.016836

for condensing boilers < 35 kW.

Flue systems

Concentric vertical complete kit Ø 60/100 (red ocher colour)

Cod.3.016833

for condensing boilers < 35 kW.

Flue systems

Cover kit for VICTRIX SUPERIOR 32 ErP/ 32 X ErP and MAGIS VICTRIX ErP

Cod.3.017209

For external installations, in partially protected places

Flue systems

Cover kit for VICTRIX TERA/PLUS

Cod.3.027263

For external installations, in partially protected places

Flue systems

Extension pipe kit Ø 60/100 0,5 m long

Cod.3.014643

For condensing boiler < 35 kW.

Flue systems

Extension pipe kit Ø 60/100 1 m long

Cod.3.012089

For condensing boiler < 35 kW.

Flue systems

Flange Ø 60/100 coupling Ø 80/125 adapter kit

Cod.3.022990

To be used with the concentric kits.
For condensing boiler < 35 kW.

Flue systems

Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge

Cod.3.016365

For condensing boilers < 35 kW.

Flue systems

Flanged stub-pipe kit Ø 60/100

Cod.3.012086

For condensing boiler < 35 kW.

Flue systems

Flanged stub-pipe kit Ø 80

Cod.3.012087

For condensing boilers < 35 kW.

Flue systems

Flanged stub-pipe Ø 80 for flue discharge

Cod.3.016364

For condensing boilers < 35 kW.

Flue systems

Flexible ducting kit Ø 80 12m with spacers

Cod.3.027875

L=12 m + 4 centering spacers.
For condensing boilers.

Flue systems

Flexible hose kit Ø 50 mm L. 10 m

Cod.3.027354

Flexible chimney ducting system for condensing boilers.

Flue systems

Flexible/flexible adapter kit for flexible ducting system Ø 50

Cod.3.027359

Flexible chimney ducting system for condensing boilers.

Flue systems

Flexible/flexible adapter kit for flexible ducting Ø 80

Cod.3.027877

For condensing boilers.

Flue systems

Gasket kit Ø 125

Cod.3.015345

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80

Cod.3.015378

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80/125

Cod.3.015343

Flue systems

HERCULES Condensing B22 - B23 terminal kit

Cod.3.020004

For air intake from technical installation room. 
For HERCULES CONDENSING range

Flue systems

Horizontal concentric complete kit Ø 60/100 Short

Cod.3.024598

Max lenght 11,9 m.
For condensing boiler < 35 kW.

Flue systems

Horizontal concentric complete kit Ø 60/100 with swivel terminal

Cod.3.024267

Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.

Flue systems

Horizontal concentric swivel outlet Ø 60/100

Cod.3.027408

for condensing boilers < 35 kW.

Flue systems

Horizontal outlet terminal Ø 80

Cod.3.016363

For condensing boiler < 35 kW.

Flue systems

Pipe clamp kit for ducting system Ø 60

Cod.3.012145

5 pipe clamps Ø 60.
For condensing boilers < 35 kW.

Flue systems

Push-fitting extension pipes kit 1 m for ducting system Ø 60

Cod.3.012144

4 extension pipes Ø 60 2 m long.

For condensing boilers < 35 kW.

Flue systems

Push-fitting extension pipes kit 2 m for ducting system Ø 60

Cod.3.013869

1 extension pipe Ø 60 2 m long.

For condensing boilers < 35 kW.

Flue systems

Spacer pipe clamp kit for ducting system Ø 60

Cod.3.012146

3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.

Flue systems

Support bend kit for ducting system Ø 60

Cod.3.012153

Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.

Flue systems

Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80

Cod.3.027874

For condensing boilers.

Flue systems

Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80

Cod.3.027873

For condensing boilers.

Flue systems

Terminal vertical outlet kit Ø 80

Cod.3.015256

For condensing boiler < 35 kW.

Flue systems

Vertical outlet kit for ducting system Ø 60

Cod.3.012112

Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.

Flue systems

Vertical outlet kit Ø 80/125 for flexible ducting Ø 80

Cod.3.027876

For condensing boilers.

Flue systems

Vertical terminal kit  Ø 80/125 for flexible ducting system Ø 50 (C5+C9)

Cod.3.027358

Flexible chimney ducting system for condensing boilers.

Flue systems

Ø 80 "T-shaped" terminal kit  Ø 80 (C5) for flexible ducting system

Cod.3.027356

Flexible chimney ducting system for condensing boilers.

Flue systems

Ø 100 adapter kit for C9 ducting system

Cod.3.022032

For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.

Flue systems

Ø 125 adapter kit for C9 ducting system

Cod.3.022033

For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for VICTRIX PRO 35/55/60/68/80 V2

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for condensing boilers

Flue systems

4 extension pipes Ø 80 kit 0,5 m long

Cod.3.014642

for condensing boilers

Flue systems

4 x 90° bends Ø 80 kit

Cod.3.012091

for condensing boilers

Flue systems

45° bend Ø 60/100 kit

Cod.3.012095

For condensing boiler < 35 kW.

Flue systems

45° bend Ø 80 kit

Cod.3.012092

for condensing boilers

Flue systems

90° bend terminal kit  Ø 50 (C5) for flexible ducting system

Cod.3.027357

Flexible chimney ducting system for condensing boilers.

Flue systems

90° bend Ø 60 for ducting system

Cod.3.013870

For condensing boilers < 35 kW.

Flue systems

90° bend Ø 60/100 kit

Cod.3.012093

For condensing boiler < 35 kW.

Flue systems

Anti-wind vertical terminal kit Ø 80

Cod.3.021721

For condensing boiler < 35 kW.

Flue systems

Chimney hole closing panel

Cod.3.012008

Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.

Flue systems

Components support kit Ø 50 mm for flexible ducting system

Cod.3.027355

Flexible chimney ducting system for condensing boilers.

Flue systems

Concentric horizontal complete kit Ø 60/100

Cod.3.012000

Max lenght 12,9 m.
For condensing boiler < 35 kW.

Flue systems

Concentric horizontal outlet Ø 60/100

Cod.3.016836

for condensing boilers < 35 kW.

Flue systems

Concentric vertical complete kit Ø 60/100 (red ocher colour)

Cod.3.016833

for condensing boilers < 35 kW.

Flue systems

Extension pipe kit Ø 60/100 0,5 m long

Cod.3.014643

For condensing boiler < 35 kW.

Flue systems

Extension pipe kit Ø 60/100 1 m long

Cod.3.012089

For condensing boiler < 35 kW.

Flue systems

Flange Ø 60/100 coupling Ø 80/125 adapter kit

Cod.3.022990

To be used with the concentric kits.
For condensing boiler < 35 kW.

Flue systems

Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge

Cod.3.016365

For condensing boilers < 35 kW.

Flue systems

Flanged stub-pipe kit Ø 60/100

Cod.3.012086

For condensing boiler < 35 kW.

Flue systems

Flanged stub-pipe kit Ø 80

Cod.3.012087

For condensing boilers < 35 kW.

Flue systems

Flanged stub-pipe Ø 80 for flue discharge

Cod.3.016364

For condensing boilers < 35 kW.

Flue systems

Flexible ducting kit Ø 80 12m with spacers

Cod.3.027875

L=12 m + 4 centering spacers.
For condensing boilers.

Flue systems

Flexible hose kit Ø 50 mm L. 10 m

Cod.3.027354

Flexible chimney ducting system for condensing boilers.

Flue systems

Flexible/flexible adapter kit for flexible ducting system Ø 50

Cod.3.027359

Flexible chimney ducting system for condensing boilers.

Flue systems

Flexible/flexible adapter kit for flexible ducting Ø 80

Cod.3.027877

For condensing boilers.

Flue systems

Gasket kit Ø 125

Cod.3.015345

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80

Cod.3.015378

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80/125

Cod.3.015343

Flue systems

HERCULES Condensing B22 - B23 terminal kit

Cod.3.020004

For air intake from technical installation room. 
For HERCULES CONDENSING range

Flue systems

Horizontal concentric complete kit Ø 60/100 Short

Cod.3.024598

Max lenght 11,9 m.
For condensing boiler < 35 kW.

Flue systems

Horizontal concentric complete kit Ø 60/100 with swivel terminal

Cod.3.024267

Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.

Flue systems

Horizontal concentric swivel outlet Ø 60/100

Cod.3.027408

for condensing boilers < 35 kW.

Flue systems

Horizontal outlet terminal Ø 80

Cod.3.016363

For condensing boiler < 35 kW.

Flue systems

Pipe clamp kit for ducting system Ø 60

Cod.3.012145

5 pipe clamps Ø 60.
For condensing boilers < 35 kW.

Flue systems

Push-fitting extension pipes kit 1 m for ducting system Ø 60

Cod.3.012144

4 extension pipes Ø 60 2 m long.

For condensing boilers < 35 kW.

Flue systems

Push-fitting extension pipes kit 2 m for ducting system Ø 60

Cod.3.013869

1 extension pipe Ø 60 2 m long.

For condensing boilers < 35 kW.

Flue systems

Spacer pipe clamp kit for ducting system Ø 60

Cod.3.012146

3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.

Flue systems

Support bend kit for ducting system Ø 60

Cod.3.012153

Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.

Flue systems

Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80

Cod.3.027874

For condensing boilers.

Flue systems

Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80

Cod.3.027873

For condensing boilers.

Flue systems

Terminal vertical outlet kit Ø 80

Cod.3.015256

For condensing boiler < 35 kW.

Flue systems

Vertical outlet kit for ducting system Ø 60

Cod.3.012112

Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.

Flue systems

Vertical outlet kit Ø 80/125 for flexible ducting Ø 80

Cod.3.027876

For condensing boilers.

Flue systems

Vertical terminal kit  Ø 80/125 for flexible ducting system Ø 50 (C5+C9)

Cod.3.027358

Flexible chimney ducting system for condensing boilers.

Flue systems

Ø 80 "T-shaped" terminal kit  Ø 80 (C5) for flexible ducting system

Cod.3.027356

Flexible chimney ducting system for condensing boilers.

Flue systems

Ø 100 adapter kit for C9 ducting system

Cod.3.022032

For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.

Flue systems

Ø 125 adapter kit for C9 ducting system

Cod.3.022033

For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for VICTRIX PRO 35/55/60/68/80 V2

Flue systems

1 extension pipe Ø 80 2 m long

Cod.3.016837

for condensing boilers

Flue systems

2 x 45° Bend kit Ø 80/125

Cod.3.015248

Flue systems

2 x 45° bend kit Ø 125

Cod.3.016180

For RAPAX 100 V2.
 

Flue systems

2 x 45° bend kit Ø 160

Cod.3.024518

for VICTRIX PRO V2 and RAPAX 200/300 V3 

Flue systems

2 x 45° bend kit Ø 200 for flue manifold

Cod.3.024664

For installations in central heating systems with VICTRIX PRO V2.

Flue systems

2 x 45° bend kit Ø 250 for flue manifold

Cod.3.024669

For installations in central heating systems with VICTRIX PRO V2.

Flue systems

4 extension pipes Ø 80 kit 0,5 m long

Cod.3.014642

for condensing boilers

Flue systems

4 extension pipes Ø 100 kit 0,5 m long

Cod.3.031132

for VICTRIX PRO 100/120/150 V2

Flue systems

4 extension pipes Ø 100 kit 1 m long

Cod.3.031373

for VICTRIX PRO 100/120/150 V2

Flue systems

4 extension pipes Ø 100 kit 2 m long

Cod.3.032319

for VICTRIX PRO 100/120/150 V2

Flue systems

4 extension pipes Ø 160 kit

Cod.3.034559

For VICTRIX PRO 180 V2 0,5 m long

Flue systems

4 extension pipes Ø 160 kit

Cod.3.034560

For VICTRIX PRO 180 V2 1 m long

Flue systems

4 extension pipes Ø 160 kit

Cod.3.034561

For VICTRIX PRO 180 V2 2 m long

Flue systems

4 x 87° bends Ø 100 kit

Cod.3.032731

for VICTRIX PRO 100/120/150 V2

Flue systems

4 x 90° bends Ø 80 kit

Cod.3.012091

for condensing boilers

Flue systems

4 x 90° bends Ø 160 kit

Cod.3.034563

For VICTRIX PRO 180 V2

Flue systems

45° bend Ø 80 kit

Cod.3.012092

for condensing boilers

Flue systems

45° bend Ø 100 kit

Cod.3.032195

for VICTRIX PRO 100/120/150 V2

Flue systems

45° bend Ø 110/160 kit

Cod.3.031395

for VICTRIX PRO 100/120/150 V2

Flue systems

45° bend Ø 160 kit

Cod.3.034562

For VICTRIX PRO 180 V2 

Flue systems

87° Bend kit Ø 80/125

Cod.3.015247

Flue systems

87° bend kit Ø 125

Cod.3.016179

For RAPAX 100 V2.
 

Flue systems

87° bend kit Ø 160

Cod.3.024517

For VICTRIX PRO V2 and RAPAX 200/300 V3 

Flue systems

87° bend kit Ø 200 for flue manifold

Cod.3.024665

Flue systems

87° bend kit Ø 250 for flue manifold

Cod.3.024670

For installations in central heating systems with VICTRIX PRO V2.

Flue systems

87° bend Ø 110/160 kit

Cod.3.031396

for VICTRIX PRO 100/120/150 V2

Flue systems

Additional exhaust manifold kit VICTRIX PRO 35/55/60/68/80 V2 Ø 160 with flue lock DN 80

Cod.3.034258

 for connection of an additional boiler

Flue systems

Additional exhaust manifold kit VICTRIX PRO 100/120/150 V2 Ø 200

Cod.3.034260

Additional exhaust manifold kit Ø 200 with flue lock DN 125 for connection of an additional boiler

Flue systems

Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 4 VICTRIX PRO 150 V2

Cod.3.034261

Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 4 VICTRIX PRO 150 V2

Flue systems

Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 5 VICTRIX PRO 150 V2

Cod.3.034262

Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 5 VICTRIX PRO 150 V2

Flue systems

Chimney hole closing panel

Cod.3.012008

Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.

Flue systems

Clapet valve kit Ø 80 in stainless steel

Cod.3.033715

For VICTRIX PRO 35-55-60-68-80 V2.

Flue systems

Clapet valve kit Ø 125 in stainless steel

Cod.3.033716

For VICTRIX PRO 100-120-150 V2.

Flue systems

Exhaust manifold kit VICTRIX PRO 35/55/60/68/80 V2 Ø 160 with flue lock DN 80

Cod.3.034257

 for exhaust connection of two boilers in cascade

Flue systems

Exhaust manifold kit Ø 200 VICTRIX PRO 100/120/150 V2

Cod.3.034259

Exhaust manifold kit Ø 200 with flue lock DN 125 for exhaust connection of two boilers in cascade.

Flue systems

Extension pipe kit Ø 80/125 1 m long

Cod.3.018667

For VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.

Flue systems

Extension pipe kit Ø 80/125 2 m long

Cod.3.015246

for VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.

 

Flue systems

Extension pipe kit Ø 110/160 1 m long

Cod.3.031397

for VICTRIX PRO 100/120/150 V2

Flue systems

Extension pipe kit Ø 110/160 2 m long

Cod.3.031398

for VICTRIX PRO 100/120/150 V2

Flue systems

Extension pipe kit Ø 125 0,5 m long

Cod.3.016370

For RAPAX 100 V2 
 

 

 

Flue systems

Extension pipe kit Ø 125 1 m long

Cod.3.016371

For RAPAX 100 V2.
 

Flue systems

Extension pipe kit Ø 125 2 m long

Cod.3.015250

For RAPAX 100 V2.
 

Flue systems

Extension pipe kit Ø 160 1 m long

Cod.3.024516

For VICTRIX PRO V2 and RAPAX 200-300 V3.

Flue systems

Extension pipe Ø 160 kit 0,5 m long

Cod.3.024659

For VICTRIX PRO V2 and RAPAX 200-300 V3.

Flue systems

Extension pipe Ø 200 kit 0,5 m long for flue manifold

Cod.3.024663

For installations in central heating systems with VICTRIX PRO V2.  

Flue systems

Extension pipe Ø 200 kit 1 m long for flue manifold

Cod.3.024662

For installations in central heating systems with VICTRIX PRO V2.

Flue systems

Extension pipe Ø 250 kit 1 m long for flue manifold

Cod.3.024668

For installations in central heating systems with VICTRIX PRO V2.

Flue systems

Flashing Kit Ø 80/125 for flat roof

Cod.3.015249

for VICTRIX PRO 35/55/60/68/80 V2

Flue systems

Gasket kit Ø 110

Cod.3.015344

Flue systems

Gasket kit Ø 125

Cod.3.015345

Flue systems

Gasket kits 4 pcs. Ø 100

Cod.3.032732

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80

Cod.3.015378

Flue systems

Gasket kits 10 pcs. Ø 80 Ø 80/125

Cod.3.015343

Flue systems

Horizontal concentric kit Ø 80/125

Cod.3.030782

For condensing boiler < 35 kW.

Flue systems

Horizontal concentric kit Ø 80/125

Cod.3.033785

for VICTRIX PRO 35/55/60/68/80 V2

Flue systems

Horizontal concentric kit Ø 110/160

Cod.3.031393

for VICTRIX PRO 100-120 ErP.

Flue systems

Horizontal concentric kit Ø 110/160

Cod.3.033789

for VICTRIX PRO 100/120/150 V2

Flue systems

Horizontal kit Ø 80

Cod.3.015255

for VICTRIX PRO 35/55/60/68/80 V2 (to discharge horizontally)

Flue systems

Horizontal kit Ø 80

Cod.3.015254

for VICTRIX PRO 35/55/60/68/80 V2 (to discharge in the chimney)

Flue systems

Horizontal kit Ø 100

Cod.3.032715

for VICTRIX PRO 100/120/150 V2 (to discharge in the chimney)

Flue systems

Horizontal kit Ø 100

Cod.3.032716

for VICTRIX PRO 100/120/150 V2 (to discharge horizontally)

Flue systems

Horizontal kit Ø 160

Cod.3.034556

For VICTRIX PRO 180 V2 (to discharge in the chimney)

Flue systems

Horizontal kit Ø 160

Cod.3.034557

For VICTRIX PRO 180 V2 (to discharge horizontally)

Flue systems

Horizontal outlet terminal Ø 80

Cod.3.016363

For condensing boiler < 35 kW.

Flue systems

Rear flue discharge kit for ARES Tec 150/200 kW

Cod.3.023701

In comparison to the standard versions, the ARES Tec 150/350 models can be installed with a flue exhaust on the back, using appropriate optional kits.

Flue systems

Rear flue discharge kit for ARES Tec 250/350 kW

Cod.3.023674

In comparison to the standard versions, the ARES Tec 150/350 models can be installed with a flue exhaust on the back, using appropriate optional kits.

Flue systems

Stub-pipe kit Ø80

Cod.3.033759

for air intake for VICTRIX PRO 35/55/60/68/80 V2 with B23 configuration

Flue systems

Stub-pipe kit Ø100

Cod.3.033760

for air intake for VICTRIX PRO 100/120/150 V2 with
B23 configuration

Flue systems

Stub-pipe kit Ø160 for air intake

Cod.3.034565

for VICTRIX PRO 180 V2 with B23 configuration

Flue systems

Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80

Cod.3.027874

For condensing boilers.

Flue systems

Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80

Cod.3.027873

For condensing boilers.

Flue systems

Supporting kit for side flue discharge ARES Tec

Cod.3.023675

All models.

Flue systems

Terminal vertical outlet kit Ø 80

Cod.3.015256

For condensing boiler < 35 kW.

Flue systems

Terminal vertical outlet kit Ø 160

Cod.3.034554

For VICTRIX PRO 180 V2 2 (to discharge at roof)

Flue systems

Twin pipes complete kit Ø 100/100

Cod.3.032717

for VICTRIX PRO 100/120/150 V2 (color RAL 9010)

Flue systems

Vertical concentric kit Ø 80/125

Cod.3.015243

For condensing boilers < 35 kW.

Flue systems

Vertical concentric kit Ø 80/125

Cod.3.033786

for VICTRIX PRO 35/55/60/68/80 V2
(black coloured, with converse for pitched roofs)

Flue systems

Vertical concentric kit Ø 110/160

Cod.3.033790

for VICTRIX PRO 100/120/150 V2
(black coloured, with converse for pitched roofs)

Flue systems

Vertical outlet kit Ø 80/125 for flexible ducting Ø 80

Cod.3.027876

For condensing boilers.

Flue systems

Vertical terminal outlet kit Ø 80

Cod.3.034579

VICTRIX PRO 35/55/60/68/80 V2 (to discharge at roof)

Flue systems

Vertical terminal outlet kit Ø 100

Cod.3.032713

For VICTRIX PRO 100/120/150 V2 (to discharge at roof)

Flue systems

Vertical terminal outlet outdoor kit Ø 80

Cod.3.024295

(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable

Flue systems

Vertical terminal outlet outdoor kit Ø 100

Cod.3.032714

(stainless steel)
VICTRIX PRO 100/120/150 V2
(for outdoor) length 1m

Flue systems

Vertical terminal outlet outdoor kit Ø 160 (stainless steel)

Cod.3.034555

For VICTRIX PRO 180 V2
(for outdoor) length 1m
Technical note: size is not adjustable

Flue systems

2 x 45° bend kit Ø 125

Cod.3.016180

For RAPAX 100 V2.
 

Flue systems

2 x 45° bend kit Ø 160

Cod.3.024518

for VICTRIX PRO V2 and RAPAX 200/300 V3 

Flue systems

87° bend kit Ø 125

Cod.3.016179

For RAPAX 100 V2.
 

Flue systems

87° bend kit Ø 160

Cod.3.024517

For VICTRIX PRO V2 and RAPAX 200/300 V3 

Flue systems

Duct adapter Ø 160

Cod.3.025232

for RAPAX 200/300 V3 and 200/300 SOL V3 
 

Flue systems

Extension pipe kit Ø 125 0,5 m long

Cod.3.016370

For RAPAX 100 V2 
 

 

 

Flue systems

Extension pipe kit Ø 125 1 m long

Cod.3.016371

For RAPAX 100 V2.
 

Flue systems

Extension pipe kit Ø 125 2 m long

Cod.3.015250

For RAPAX 100 V2.
 

Flue systems

Extension pipe kit Ø 160 1 m long

Cod.3.024516

For VICTRIX PRO V2 and RAPAX 200-300 V3.

Flue systems

Extension pipe Ø 160 kit 0,5 m long

Cod.3.024659

For VICTRIX PRO V2 and RAPAX 200-300 V3.

Flue systems

Inlet/exhaust pipes insulation kit

Cod.3.028371

For RAPAX 100 V2

Composed by:

• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm

 

Flue systems

Inlet/exhaust pipes insulation kit

Cod.3.027545

For RAPAX 200/300 V3 and 200/300 SOL V3

Options

1 litre bottle of glycol

Cod.1.028473

To be mixed with water according to the minimum outside temperature.

Options

1"¼ thermostatic mixing valve kit

Cod.3.020322

The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 85 °C.
Equipped with thermometer

Options

2 brackets kit for slates/tiles for CP4 XL/M Flat-Plate Collector

Cod.3.022680

The kit includes: 2 brackets, 1 fixing clamp with hole, 1 mounting template (to be removed after installation).

Options

2 plug kit for CP4 XL/M Flat-Plate Collector

Cod.3.020364

The kit includes: 2 mechanical sealing plugs to close fittings not used by CP4 XL/M Flat-Plate Collector.

 

Options

3-way valve kit

Cod.3.020632

Options

4 "L"-shaped brackets kit for slates/tiles on smooth roofs for CP4 XL/M Flat-Plate Collector

Cod.3.022776

The kit includes: 4 brackets.
It allows to fix the selector frame onto smooth roofs (for 1 collector). Always add the fixing element kit code 3.022922.

Options

4 brackets kit for slates/tiles for CP4 XL/M Flat-Plate Collector

Cod.3.022678

The kit includes: 4 brackets, 2 collector side fixing brackets.
It allows to fix the collector frame onto sloped roofs without drilling the tiles (for 1 collector).

Options

4 brackets kit for slates/tiles to be drilled for CP4 XL/M Flat-Plate Collector

Cod.3.019105

The kit includes: 4 brackets.
It allows to fix the collector frame onto sloped roofs.
Always add the fixing element kit code 3.022922.

Options

4 brackets kit for slates/tiles to fix directly on roof for NATURAL SOL

Cod.3.019236

It allows to fix the collector frame directly onto sloped roofs without drilling the tiles.

Options

18 litre expansion vessel kit

Cod.3.019131

Including metal clamp and wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.

Options

24 litre expansion vessel kit

Cod.3.019138

Including metal clamp and wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.

Options

35 litre expansion vessel kit

Cod.3.019135

Including wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.

Options

80 litre expansion vessel kit

Cod.3.019139

With support for placing on the floor.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.

Options

Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750

Cod.3.020861

Power supply 230 or 400 Vac.

Options

Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750

Cod.3.020862

Power supply 230 or 400 Vac.

Options

Antifreeze electric heater 300 W

Cod.3.029920

(for external temperatures from 0 °C to -13 °C).
For SOLARSMART.

 

Options

Automatic valve kit for expansion vessel

Cod.3.023005

As standard for a packs.
Automatically shuts the passage of fluid during maintenance of the expansion vessel.

Options

Basic free-standing 45° installation kit for 1 vertical CP4 XL/M Flat-Plate Collector

Cod.3.022674

The kit includes: 4 profiles , 2 collector side fixing brackets.

Options

Connection kit for 1 vertical CP4 XL/M Flat-Plate Collector

Cod.3.022797

The kit includes: fittings for Ø 18 copper pipes and DN 16 and DN, 20 steel pipes, 2 plugs for CP4 XL/M.
(To be used for sets of 1 to 6 collectors in series)

Options

Connection kit for UB Inox 200-2 or UB Inox 120-2 in parallel

Cod.3.022212

Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.

Options

Connection kit for additional vertical CP4 XL/M Flat-Plate Collector

Cod.3.019085

The kit includes: hydraulic fittings to connect up to 3 CP4 XL/M Flat-Plate Collectors in series.

Options

Connection kit for double solar pump stations

Cod.3.021008

The kit includes: hydraulic fittings.

Options

Connection kit for double solar pump stations

Cod.3.020300

The kit includes: hydraulic fittings.

Options

Cover for CP4 M Flat-Plate Collector

Cod.1.028522

Allows to cover the collector to guarantee its integrity until it is filled.

Options

Cover for CP4 XL Flat-Plate Collector

Cod.1.033271

Allows to cover the collector to guarantee its integrity until it is filled.

Options

DN 16 steel pipe connection kit for collectors

Cod.3.019125

The kit includes:
double DN 16 insulated 15 m long steel pipe integrated cable for solar collector temperature probe.

Options

DN 20 steel pipe connection kit for collectors

Cod.3.020354

The kit includes:
double DN 20 insulated 15 m long steel pipe integrated cable for solar collector temperature probe hydraulic fittings for connections.

Options

Double electronic anode kit

Cod.3.025003

For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
 
 
 
 

Options

Double electronic anode kit

Cod.3.029643

Double electronic anode kit for UB INOX 200 V2/UB INOX SOLAR 200 V2 and HERCULES SOLAR

Options

Double solar pump station (1-6 l/min) ErP

Cod.3.034597

The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.

Options

Double solar pump station (2-12 l/min) ErP

Cod.3.034596

The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.

Options

Double solar pump station (8-28 l/min) ErP

Cod.3.034598

The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.

Options

Electronic anode kit

Cod.3.030694

Electronic anode kit for HERCULES and UB INOX 80 /120 V2

Options

Electronic anode kit for Storage Tank Unit up to 500 litres

Cod.3.020344

Can be used instead of magnesium anodes, requires no periodical replacement.

Options

Fixing elements kit for CP4 XL/M Flat-Plate Collector

Cod.3.022922

This kit must always be added when using the kits Code 3.019105 and Code 3.022776.
The kit includes: collector side fixing brackets and 1 intermediate bracket.

Options

Frame connection kit for additional CP4 XL/M Flat-Plate Collector

Cod.3.022681

The kit includes: 2 brackets.
The kit allows to mechanically connect two frames together when installing more than one collector.

Options

Frame on tiles kit for 1 horizontal CP4 XL/M Flat-Plate Collector

Cod.3.022749

The kit includes: 2 horizontal profiles.
(the profiles must be shortened when using CP4 M)

Options

Frame on tiles kit for 1 vertical CP4 XL/M Flat-Plate Collector

Cod.3.022670

The kit includes: 2 horizontal profiles.

Options

Frame on tiles kit for 2 vertical CP4 XL/M Flat-Plate Collectors

Cod.3.022671

The kit includes: 2 horizontal profiles.

Options

Free-standing 45° installation extension kit for vertical CP4 XL/M Flat-Plate Collector

Cod.3.022677

The kit includes: 2 profiles , 1 fixing clamp with hole , 1 mounting template (to be removed after installation).

Options

Free-standing 45° installation kit for 1 Flat-Plate Collector

Cod.3.022750

The kit includes: 4 profiles, 2 collector side fixing brackets.
(the horizontal profiles must be shortened when using CP4 M)

Options

INOXSTOR 200 V2

Cod.3.027746

INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.

Options

INOXSTOR 300 V2

Cod.3.027747

INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.

Options

Integration electric heater 1 kW

Cod.3.029921

Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.

 

Options

Integration electric heater 2 kW

Cod.3.029922

Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.

 

Options

NATURAL SOL by-pass kit

Cod.3.022453

Can be used to empty the storage tank during winter.

Options

Pressure - temperature safety valve kit for NATURAL SOL

Cod.3.020342

Setted at 6 bar and 94 °C.

Options

Pressure reducer kit

Cod.3.029919

Connection ¾". 3 bar setting.
For SOLARSMART.

Options

Probe kit for PT 1000 solar collector

Cod.3.019374

Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit

Options

Recessed frame extension kit for CP4 XL/M Flat-Plate Collector

Cod.3.027736

The kit includes: intermediate frame around collectors.

Options

Recessed frame extension kit for CP4 XL/M Flat-Plate Collector

Cod.3.027849

The kit includes: intermediate frame around collectors.

Options

Recessed kit for 1 Flat-Plate Collector

Cod.3.027735

The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.

Options

Recessed kit for 1 Flat-Plate Collector

Cod.3.027768

The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.

Options

Recessed kit for 1 Flat-Plate Collector

Cod.3.027769

The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.

Options

Recirculation kit UB Inox 80-2

Cod.3.022198

Only probe pipe.

Options

Recirculation kit UB Inox 120-2

Cod.3.022199

Only probe pipe.

Options

Recirculation kit UB Inox Solar 200-2 and UB Inox 200-2

Cod.3.022200

Only probe pipe.

Options

Recirculation pipe kit for 2 UB Inox 120-2 or 2 UB Inox 200-2 in parallel

Cod.3.022201

For 2 UB INOX 120 V2 or 2 UB INOX 200 V2 in parallel.

Options

Sanitary priority 3-way valve kit

Cod.3.020633

Options

Single solar pump station (1-6 l/min) ErP

Cod.3.025662

The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.

Options

Single solar pump station (2-12 l/min) ErP

Cod.3.025663

The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.

Options

Solar panel connection kit for UB Inox 120-2

Cod.3.022197

Including pipes and fittings for connection in template.

Options

Solar panel connection kit for UB Inox 200-2

Cod.3.022195

Including pipes and fittings for connection in template.

Options

Solar panel connection kit for UB Inox 200-2 or UB Inox 120-2 in parallel

Cod.3.022196

Including pipes and fittings for connection in template.

Options

Solar valve

Cod.3.018911

Allows the connection between combi boiler and solar system.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO and NIKE/EOLO Star.

Options

Storage tank probe kit

Cod.3.015268

Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit

Options

System filling pump station

Cod.3.018742

Ideal for correctly filling the forced circulation solar system with the waterglycol solution.

Options

Tank of glycol for CP4 XL/M Flat-Plate Collectors

Cod.3.028517

The kit includes:
one 20 kg can of glycol and propylene already mixed and ready to use.
Antifreeze protection up to - 25 °C.

Options

UB 300 V2

Cod.3.028480

Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.

Options

Vent kit and fitting for Ø 22 mm pipe for horizontal CP4 XL/M Flat-Plate Collector

Cod.3.022849

This kit is used in applications with horizontal CP4 XL/M Flat-Plate.

Options

¾" Mixing valve

Cod.3.019099

Range 42-60 °C.
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 90 °C.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO, NIKE/EOLO Star, CAESAR 14 and Super CAESAR 17.

Options

¾" nut kit for DN 16 steel pipe

Cod.1.027255

For connection to solar collectors.

Options

Ø 18 copper pipe connection kit for collectors

Cod.3.019089

The kit includes:
double Ø 18 mm insulated 15 m long copper pipe integrated cable for solar collector temperature probe.

Options

1,5 kW sanitary electric resistance

Cod.3.024897

 
 
 

Options

1,5 kW sanitary electric resistance kit

Cod.3.029927

for SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 heat pump

Options

2 zones kit (1 mixed and 1 direct)

Cod.3.031695

For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12

Options

2,3 kW - DHW integration electric heater kit for MAGIS HERCULES PRO

Cod.3.030862

 

 

Options

2nd mixed zone kit for MAGIS HERCULES PRO 4-6-9

Cod.3.030855

For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, mixing valve and
connection pipes.

Options

2nd mixed zone kit for MAGIS HERCULES PRO 12-14-16

Cod.3.030943

For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, mixing valve and
connection pipes.

Options

3 kW - Integration electric heater kit

Cod.3.030899

For MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO

 

Options

3 kW integration electric resistance kit for MAGIS PRO V2

Cod.3.030991

For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing

Options

3 kW integration electric resistance kit for TRIO PACK ELECTRIC

Cod.3.031937

For TRIO PACK ELECTRIC system ELECTRIC.

Options

3-way valve kit

Cod.3.020632

Options

3rd mixed zone kit for MAGIS HERCULES PRO 4-6-9

Cod.3.030856

For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.

Options

3rd mixed zone kit for MAGIS HERCULES PRO 12-14-16

Cod.3.030944

For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.

Options

12 litre system expansion vessel kit

Cod.3.011679

for plants with MAGIS M.

Options

Accessories kit for TRIO HYDRO system ELECTRIC

Cod.3.032748

Includes: system expansion vessel, manometer, D.H.W. 1,5 kW electric resistance and specific relay

Options

Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750

Cod.3.020861

Power supply 230 or 400 Vac.

Options

Additional 2nd mixed zone SUPER TRIO TOP

Cod.3.031186

Additional 2nd mixed zone SUPER TRIO TOP
Composed by 1 low consumption pump, mixing valve and hydraulic connections. 

Options

Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750

Cod.3.020862

Power supply 230 or 400 Vac.

Options

Additional mixed 2nd zone kit

Cod.3.027865

Additional mixed 2nd zone kit composed by:
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated

Options

Additional mixed 2nd zone kit for TRIO PACK

Cod.3.031483

Options

Aesthetic upper cover for DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)

Cod.3.030484

 

 

 

Options

Anti freeze protection kit -15 °C

Cod.3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Options

Anti-scale kit for MAGIS HERCULES PRO

Cod.3.030859

To be installed inside the casing.

Options

Anti-scale kit for TRIO PACK

Cod.3.032261

indoor only

Options

Antivibration supports (3 pieces)

Cod.3.032854

For MAGIS M

Options

Bottom connection kit for SUPER TRIO TOP

Cod.3.031193

To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP

Options

Bracket kit for wall mounting 75 inertial storage tank

Cod.3.027290

Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
 

Options

Buffer tank 15 litres

Cod.3.026304

to be installed in CONTAINER or DOMUS CONTAINER 

Options

CONTAINER for SUPER TRIO/SUPER TRIO TOP (Recessed frame)

Cod.3.030394

Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.

is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.

Dimensions (H x W x D) mm 2200 x 1100 x 495

Options

Connection cover kit

Cod.3.034183

For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.

Options

Connection kit R32 gas refrigerant circuit

Cod.3.031505

for MAGIS HERCULES PRO 4-6-9 

Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.

Options

Connection kit R410Agas refrigerant circuit

Cod.3.031506

for MAGIS HERCULES PRO 12-14-16

Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.

Options

Connection kit for R32 circuit for MAGIS PRO V2 and MAGIS COMBO V2

Cod.3.030883

for an easy connection of the refrigerant circuit, even
in the case of pipes coming out from the wall on the
internal unit 

Options

Connection kit for R32 circuit for TRIO PACK

Cod.3.031966

For connection R32 toward the lower part of the Container

Options

Connection kit for R410A circuit

Cod.3.026089

To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall 

Options

Connection kit for horizontal zones (side connection) for TRIO PACK O

Cod.3.032256

including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2

Options

Connection kit for rear zones (rear connection) for TRIO PACK

Cod.3.032258

including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2

Options

Connection kit for vertical zones (bottom connection) for TRIO PACK

Cod.3.032257

including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2

Options

Connection kit with flexible pipes and shut-off knobs 1"

Cod.3.025954

For MAGIS M4 and 6

Options

Connection kit with flexible pipes and shut-off knobs 1" 1/4

Cod.3.032846

For MAGIS M8/12/14/16/18/22/26/30

Options

DHW recirculation kit

Cod.3.026169

pump not included

Options

DOMUS CONTAINER (technical box)

Cod.3.022167

Technical box for solutions TRIO V2 and TRIO MONO V2. 
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365

 

 

Options

DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)

Cod.3.030393

Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.

is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.

Dimensions (H x W x D) mm 2110 x 1160 x 520

Options

Dehumidifier back frame kit

Cod.3.022146

Options

Dehumidifier front grille kit

Cod.3.022147

Options

Dehumidifier kit

Cod.3.021529

Only for recessed installation with codes 3.022146 and 3.022147

 

Options

Distribution manifold for 1 direct and 1 mixed temperature zones

Cod.3.026301

Kit to be used without system manager controller.

Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO 5-8

Options

Distribution manifold for 1 direct and 1 mixed temperature zones (only heating)

Cod.3.032265

Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES MINI HYDRO 5-8

Options

Distribution manifold for 2 direct zones (only heating)

Cod.3.032264

Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.

For 2 direct zones (only heating)

Options

Distribution manifold kit for 1 direct and 2 mixed temperature zones

Cod.3.021527

The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
Wall-hung or recessed installation. Low consumption pumps.

Options

Distribution manifold kit for 2 mixed temperature zones

Cod.3.021528

The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each delivery.
Wall-hung or recessed installation. Low consumption pumps.

Options

Double electronic anode kit

Cod.3.025003

For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
 
 
 
 

Options

External cover kit with acoustical insulation for ZENITAIR-MONO

Cod.3.030636

Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
 
 
 
 

Options

HYDRO 3 V2

Cod.3.033625

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

Options

HYDRO IN 200

Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO 4 V2

Cod.3.033626

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

Options

HYDRO FS 200

Cod.3.028500

Floor standing hydronic fancoil 
 
 
 

Options

HYDRO FS 400

Cod.3.028501

Floor standing hydronic fancoil
 

Options

HYDRO FS 600

Cod.3.028502

Floor standing hydronic fancoil 
 
 

Options

HYDRO FS 800

Cod.3.028503

Floor standing hydronic fancoil 
 
 

Options

HYDRO FS 1000

Cod.3.028505

Floor standing hydronic fancoil 
 

Options

HYDRO IN 400

Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 600

Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 800

Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 1000

Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

INOXSTOR 200 V2

Cod.3.027746

INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.

Options

INOXSTOR 300 V2

Cod.3.027747

INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.

Options

Integration electric resistance kit 2, 4 or 6 kW for heating system

Cod.3.021525

For internal installation

Options

Lateral connection kit for SUPER TRIO TOP

Cod.3.031194

To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP

Options

MAGIS HERCULES PRO MINI hydraulic connection kit with by-pass

Cod.3.034333

For MAGIS HERCULES PRO MINI 

Options

MAGIS PRO connection kit

Cod.3.026303

For TRIO V2/MONO V2 with MAGIS PRO V2.
includes: hydraulic and gas R410A and R32 fittings, support bracket for indoor unit of MAGIS PRO and NTC probe for storage tank.

Options

OMNISTOR 300

Cod.3.027910

Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003

Options

OMNISTOR 500

Cod.3.027911

Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003

Options

Probe kit for PT 1000 solar collector

Cod.3.019374

Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit

Options

Rear connection kit for SUPER TRIO TOP

Cod.3.031195

To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP

Options

Recessed buffer tank 50 litres

Cod.3.027709

for installations above or at the side of the container 

Options

Recirculation kit for SUPER TRIO (pump not included)

Cod.3.030483

 

 

 

Options

Recirculation kit for SUPER TRIO TOP (pump not included)

Cod.3.031205

 

 

 

Options

Recirculation kit with pump

Cod.3.030858

To be installed inside the MAGIS HERCULES PRO internal unit casing 

Options

Recirculation kit with pump

Cod.3.033217

To be installed inside the MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO internal unit casing 

Options

Refrigerant R32 connection kit

Cod.3.033211

for MAGIS HERCULES PRO MINI

To connect gas fittings to the rear wall

Options

SOLAR CONTAINER (recessed frame)

Cod.3.020166

Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).

Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350

Options

Safety valve 7 bar and 12 litres expansion vessel kit

Cod.3.025231

For RAPAX 200/300 V3 and 200/300 SOL V3
It can be fixed into wall thanks to brackets (as standard).

Options

Safety valve 7 bar and 12 litres expansion vessel kit

Cod.3.028368

For RAPAX 100 V2
It can be fixed into wall thanks to brackets (as standard).

Options

Shut off knobs with filters for MAGIS HERCULES PRO

Cod.3.030861

Shut off knobs with filters

1" connections (for zones 2 and 3, only); standard for zone 1.

Options

Solar kit

Cod.3.024719

Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).

Options

Solar kit

Cod.3.033210

For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO

Composed by: plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, shut off knobs, connection pipes, mixing valve, 18 litre solar expansion vessel, temperature probes (for collectors and storage tank). 

Options

Solar kit for MAGIS HERCULES PRO

Cod.3.030857

For MAGIS HERCULES PRO.

Composed by: plate heat exchanger, single solar pump
station (with low consumption circulation pump), solar
central unit, connection pipes,18 litre solar expansion vessel,
temperature probes (for collectors and storage tank).
N.B.: For solar panel and other solar accessories see the
solar catalogue.

Options

Solar kit for OMNISTOR

Cod.3.029723

Composed of: aesthetic cover frame, plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, connection insulated pipes.   

Options

Solar kit for SUPER TRIO

Cod.3.030482

Solar kit composed by: plate heat exchanger, single solar
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).

Options

Solar kit for SUPER TRIO TOP

Cod.3.031189

Solar kit for SUPER TRIO TOP.

Options

Solar kit for TRIO PACK ELETRIC

Cod.3.031603

Composed of: plate heat exchanger, single solar pump
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)

Options

Vertical buffer tank with capacity of 50 litres

Cod.3.027539

 
 
 

Options

Vertical inertial storage tank 75 litre

Cod.3.027288

Wall-hung (with bracket option kit) or floor-standing installation.

Options

Wall mounting brackets for external unit

Cod.3.034758

For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PROMAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.

 

Options

ZENITAIR MONO

Cod.3.030601

Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 

Options

2 high temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP

Cod.3.025485

Modulating low consumption pumps.

Options

2 litres additional expansion vessel

Cod.3.018433

Available for MAGIS VICTRIX ErP, MAGIS HERCULES ErP and for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, AVIO ECO 24, NIKE ECO 24, VICTRIX SUPERIOR ErP/X ErP, MAIOR EOLO, MINI EOLO/NIKE and MINI EOLO/NIKE X.

Options

2 litres additional expansion vessel

Cod.3.017514

Available for: VICTRIX, VICTRIX X.

Options

2 litres additional expansion vessel for VICTRIX SUPERIOR

Cod.3.032168

For VICTRIX SUPERIOR.

Options

2 low temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP

Cod.3.025487

Modulating low consumption pumps.

Options

Additional low temperature zone kit for HERCULES CONDENSING ABT 32 ErP

Cod.3.025486

Modulating low consumption pump.

Options

All-purpose connection kit for wall-hung combi boilers

Cod.3.011667

For wall-hung combi boilers and also for wall-hung with built-in storage tank.

Options

Anti freeze protection kit -15 °C

Cod.3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Options

Anti freeze protection kit -15 °C

Cod.3.031804

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Options

Anti-freeze protection kit -15 °C for VICTRIX SUPERIOR ErP/X ErP

Cod.3.015348

 

 

Options

Anti-scale kit

Cod.3.013499

For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24

Options

Anti-scale kit for HERCULES Condensing ErP

Cod.3.019999

 

 

Options

Anti-scale kit for VICTRIX SUPERIOR, MAIOR TT, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2

Cod.3.017323

For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.

Options

Bottom cover kit

Cod.3.028656

Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT

Options

Bottom cover kit

Cod.3.030438

Aestethics frame (250 mm height, 407 mm depth) that covers connections zone and the main option kits

 

Options

Bottom cover kit for VICTRIX SUPERIOR

Cod.3.032167

for VICTRIX SUPERIOR 

Options

Bottom cover kit for VICTRIX ZEUS 25-32   code 3.030323

Cod.3.030323

For VICTRIX ZEUS 25-32.
 

Options

Clock kit for Recirculation

Cod.3.015431

To be used to manage the recirculation pump.

Options

Condensate discharge pump kit

Cod.3.026841

For floor standing boilers: compact condensate drain pump kit.

Options

Condensate discharge pump kit

Cod.3.026374

For wall-hung boilers: compact condensate drain pump kit.

Options

Condensate neutralizer kit

Cod.3.019857

Necessary to neutralize the acidity of the condensation. Inclusive of granulate.

Options

Connection kit for VICTRIX X TT, VICTRIX X TT ErP, VICTRIX EXA 24 X ErP and VICTRIX TERA PLUS V2 EU

Cod.3.024907

For the installation of heating only boilers.

Options

Connection kit for VICTRIX Zeus 26

Cod.3.020505

Options

Cover kit for VICTRIX EXA ErP/ EXA X ErP

Cod.3.026010

For "B23" configuration.

Options

Cover kit for VICTRIX OMNIA

Cod.3.028415

For external installations, in partially protected places

Options

Cover kit for VICTRIX SUPERIOR

Cod.3.032166

For partially protected area installation
 

Options

Cover kit for VICTRIX ZEUS SUPERIOR

Cod.3.030077

For VICTRIX ZEUS SUPERIOR
 

Options

D.H.W. expansion vessel for VICTRIX Zeus

Cod.3.020400

Options

DIM 2 ZONES ErP

Cod.3.025607

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.

Options

DIM 3 ZONES ErP

Cod.3.025608

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.

Options

DIM BASIC ErP

Cod.3.025606

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.

Options

DIM H-2LT ErP

Cod.3.025610

Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.

Options

DIM H-LT ErP

Cod.3.025609

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.

Options

High temperature second zone kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP

Cod.3.025484

Modulating low consumption pump.

Options

Low temperature second zone kit for HERCULES SOLAR 26 2 ErP, HERCULES CONDENSING ErP

Cod.3.025483

Modulating low consumption pump.

Options

Magnetic cyclone filter kit

Cod.3.024176

Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).

Available for wall-hung condensing boilers.

Options

Probe kit for PT 1000 solar collector

Cod.3.019374

Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit

Options

Recirculation kit

Cod.3.015380

Domestic hot water pump included.
Available for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24.

Options

Recirculation kit

Cod.3.020001

Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.

Options

Recirculation kit for VICTRIX ZEUS Superior kW

Cod.3.013498

Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.

Options

Recirculation kit for VICTRIX Zeus

Cod.3.012944

Only probe pipe, not pump included.
Available for VICTRIX Zeus.

Options

Shut off knobs

Cod.3.5324

For wall-hung outdoor boilers.

Options

Shut off knobs with filter

Cod.3.015854

For wall-hung boilers.  

Options

Shut-off knobs

Cod.3.014948

For DIM ErP

 

Options

Solar panel kit for HERCULES Condensing ErP

Cod.3.019998

It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.

Options

Storage tank connection kit for VICTRIX Superior TOP 32 X E

Cod.3.022848

Options

Storage tank connection kit for VICTRIX X TT ErP

Cod.3.024609

Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.

Options

Storage tank probe kit

Cod.3.015268

Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit

Options

kit containing bottom guard for condensing boilers

Cod.3.027341

For wall-hung condensing boilers.

Options

2 high temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP

Cod.3.025485

Modulating low consumption pumps.

Options

2 low temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP

Cod.3.025487

Modulating low consumption pumps.

Options

Aesthetic upper cover DOMUS CONTAINER

Cod.3.027175

 

 

 

Options

Anti freeze protection kit -15 °C

Cod.3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Options

Anti scale kit

Cod.3.020628

 

 

 

Options

Anti-scale kit for HERCULES SOLAR

Cod.3.020498

For HERCULES SOLAR 

Options

Bottom connection kit

Cod.3.020575

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Options

Condensate discharge pump kit

Cod.3.026841

For floor standing boilers: compact condensate drain pump kit.

Options

DHW recirculation kit

Cod.3.026169

pump not included

Options

DOMUS CONTAINER (technical box)

Cod.3.022167

Technical box for solutions TRIO V2 and TRIO MONO V2. 
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365

 

 

Options

High temperature second zone kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP

Cod.3.025484

Modulating low consumption pump.

Options

Lateral connection kit

Cod.3.020574

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Options

Low temperature second zone kit for HERCULES SOLAR 26 2 ErP, HERCULES CONDENSING ErP

Cod.3.025483

Modulating low consumption pump.

Options

Rear connection kit

Cod.3.020630

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Options

Recirculation kit

Cod.3.030689

Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.

Options

Recirculation kit

Cod.3.020001

Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.

Options

SOLAR CONTAINER (recessed frame)

Cod.3.020166

Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).

Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350

Options

Solar connection kit for HERCULES SOLAR 26 ErP

Cod.3.021382

For HERCULES SOLAR 26 ErP

For alignment of solar circuit in template.

Options

2 litres additional expansion vessel

Cod.3.018433

Available for MAGIS VICTRIX ErP, MAGIS HERCULES ErP and for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, AVIO ECO 24, NIKE ECO 24, VICTRIX SUPERIOR ErP/X ErP, MAIOR EOLO, MINI EOLO/NIKE and MINI EOLO/NIKE X.

Options

2 litres additional expansion vessel

Cod.3.017514

Available for: VICTRIX, VICTRIX X.

Options

2 zones kit (1 mixed and 1 direct)

Cod.3.031695

For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12

Options

2 zones kit with motorized valves MAGIS VICTRIX

Cod.3.023769

Dimensions (H x W x P) 220 x 350 x 230 mm.

Options

3-way valve kit

Cod.3.020632

Options

Additional 2nd mixed zone SUPER TRIO TOP

Cod.3.031186

Additional 2nd mixed zone SUPER TRIO TOP
Composed by 1 low consumption pump, mixing valve and hydraulic connections. 

Options

Additional mixed 2nd zone kit

Cod.3.027865

Additional mixed 2nd zone kit composed by:
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated

Options

Additional mixed 2nd zone kit for TRIO PACK

Cod.3.031483

Options

Additional mixed zone kit for MAGIS HERCULES

Cod.3.023314

Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.

Options

Aesthetic upper cover DOMUS CONTAINER

Cod.3.027175

 

 

 

Options

Aesthetic upper cover for DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)

Cod.3.030484

 

 

 

Options

All-purpose connection kit for wall-hung combi boilers

Cod.3.011667

For wall-hung combi boilers and also for wall-hung with built-in storage tank.

Options

Anti freeze protection kit -15 °C

Cod.3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Options

Anti freeze protection kit -15 °C

Cod.3.031804

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Options

Anti scale kit

Cod.3.020628

 

 

 

Options

Anti-freeze protection kit MAGIS VICTRIX

Cod.3.023770

Until -15 °C

Options

Anti-scale kit for TRIO PACK

Cod.3.032261

indoor only

Options

Anti-scale kit for VICTRIX SUPERIOR, MAIOR TT, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2

Cod.3.017323

For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.

Options

Anti-scale kit for MAGIS HERCULES ErP

Cod.3.023316

For MAGIS HERCULES ErP.

Options

Anti-scale kit for MAGIS VICTRIX

Cod.3.023310

Only for internal installation of MAGIS VICTRIX

Options

Bottom connection kit

Cod.3.020575

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Options

Bottom connection kit for SUPER TRIO TOP

Cod.3.031193

To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP

Options

Bracket kit for wall mounting 75 inertial storage tank

Cod.3.027290

Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
 

Options

CONTAINER for SUPER TRIO/SUPER TRIO TOP (Recessed frame)

Cod.3.030394

Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.

is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.

Dimensions (H x W x D) mm 2200 x 1100 x 495

Options

Clock kit for Recirculation

Cod.3.015431

To be used to manage the recirculation pump.

Options

Condensate antifreeze heating cable kit for external unit

Cod.3.030930

Suitable to extend external unit antifreeze protection up to -15 °C.

Options

Condensate discharge pump kit

Cod.3.026841

For floor standing boilers: compact condensate drain pump kit.

Options

Condensate discharge pump kit

Cod.3.026374

For wall-hung boilers: compact condensate drain pump kit.

Options

Condensate neutralizer kit

Cod.3.019857

Necessary to neutralize the acidity of the condensation. Inclusive of granulate.

Options

Connection kit for R32 circuit for MAGIS PRO V2 and MAGIS COMBO V2

Cod.3.030883

for an easy connection of the refrigerant circuit, even
in the case of pipes coming out from the wall on the
internal unit 

Options

Connection kit for R32 circuit for TRIO PACK

Cod.3.031966

For connection R32 toward the lower part of the Container

Options

Connection kit for R410A circuit

Cod.3.026089

To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall 

Options

Connection kit for horizontal zones (side connection) for TRIO PACK O

Cod.3.032256

including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2

Options

Connection kit for rear zones (rear connection) for TRIO PACK

Cod.3.032258

including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2

Options

Connection kit for vertical zones (bottom connection) for TRIO PACK

Cod.3.032257

including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2

Options

Connection kit with flexible pipes and shut-off knobs 1"

Cod.3.025954

For MAGIS M4 and 6

Options

Cover kit for MAGIS COMBO 4/6/9 V2

Cod.3.027082

Cover kit for MAGIS COMBO 4/6/9 V2

Options

Cover kit for MAGIS COMBO 12-14-16 V2

Cod.3.031977

Cover kit for MAGIS COMBO 12-14-16 V2

Options

DHW recirculation kit

Cod.3.026169

pump not included

Options

DIM 2 ZONES ErP

Cod.3.025607

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.

Options

DIM 3 ZONES ErP

Cod.3.025608

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.

Options

DIM BASIC ErP

Cod.3.025606

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.

Options

DIM H-2LT ErP

Cod.3.025610

Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.

Options

DIM H-LT ErP

Cod.3.025609

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.

Options

DOMUS CONTAINER (technical box)

Cod.3.022167

Technical box for solutions TRIO V2 and TRIO MONO V2. 
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365

 

 

Options

DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)

Cod.3.030393

Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.

is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.

Dimensions (H x W x D) mm 2110 x 1160 x 520

Options

Dehumidifier back frame kit

Cod.3.022146

Options

Dehumidifier front grille kit

Cod.3.022147

Options

Dehumidifier kit

Cod.3.021529

Only for recessed installation with codes 3.022146 and 3.022147

 

Options

Distribution manifold for 1 direct and 1 mixed temperature zones

Cod.3.026301

Kit to be used without system manager controller.

Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO 5-8

Options

Distribution manifold for 1 direct and 1 mixed temperature zones (only heating)

Cod.3.032265

Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES MINI HYDRO 5-8

Options

Distribution manifold for 2 direct zones (only heating)

Cod.3.032264

Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.

For 2 direct zones (only heating)

Options

External cover kit with acoustical insulation for ZENITAIR-MONO

Cod.3.030636

Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
 
 
 
 

Options

HYDRO 3 V2

Cod.3.033625

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

Options

HYDRO IN 200

Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO 4 V2

Cod.3.033626

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

Options

HYDRO FS 200

Cod.3.028500

Floor standing hydronic fancoil 
 
 
 

Options

HYDRO FS 400

Cod.3.028501

Floor standing hydronic fancoil
 

Options

HYDRO FS 600

Cod.3.028502

Floor standing hydronic fancoil 
 
 

Options

HYDRO FS 800

Cod.3.028503

Floor standing hydronic fancoil 
 
 

Options

HYDRO FS 1000

Cod.3.028505

Floor standing hydronic fancoil 
 

Options

HYDRO IN 400

Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 600

Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 800

Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 1000

Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

Horizontal buffer tank with capacity of 25 litres

Cod.3.030915

Suitable to install it under external unit it is necessary adapter kit code 3.030915

Options

Horizontal buffer tank with capacity of 25 litres

Cod.3.027842

For AUDAX heat pump.

Options

Hydronic kit for MAGIS COMBO PLUS IN SOLAR CONTAINER COMBO

Cod.3.027867

Composed by:
• DHW storage tank in stainless steel with double
coil 160 litres of capacity (class C)
• hydraulic distribution unit for one zone that
includes: hydraulic manifold, 1 low consumption
pump, DHW expansion vessel 8 litres, safety valve 8
bar and thermostatic mixing valve.
All components are insulated

Options

INOXSTOR 200 V2

Cod.3.027746

INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.

Options

INOXSTOR 300 V2

Cod.3.027747

INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.

Options

Lateral connection kit

Cod.3.020574

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Options

Lateral connection kit for SUPER TRIO TOP

Cod.3.031194

To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP

Options

MAGIS COMBO 12-14-16 PLUS V2 connection kit for SUPER TRIO TOP

Cod.3.031699

Per soluzioni MAGIS COMBO PLUS 12-14-16 con SUPER TRIO TOP.

Options

MAGIS COMBO PLUS with SUPER TRIO connection kit

Cod.3.030599

Composed by: electrical wiring, antifreeze heating cable and NTC probe for storage tank

Options

Magnetic cyclone filter kit

Cod.3.024176

Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).

Available for wall-hung condensing boilers.

Options

OMNISTOR 300

Cod.3.027910

Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003

Options

OMNISTOR 500

Cod.3.027911

Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003

Options

Plates heat exchanger kit for AUDAX connection to MAGIS HERCULES

Cod.3.023355

To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.

Options

Rear connection kit

Cod.3.020630

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

Options

Rear connection kit for SUPER TRIO TOP

Cod.3.031195

To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP

Options

Recessed buffer tank 50 litres

Cod.3.027709

for installations above or at the side of the container 

Options

Recirculation kit for SUPER TRIO (pump not included)

Cod.3.030483

 

 

 

Options

Recirculation kit for SUPER TRIO TOP (pump not included)

Cod.3.031205

 

 

 

Options

Recirculation kit with pump for MAGIS HERCULES

Cod.3.023315

It's possible install this kit inside MAGIS HERCULES.

Options

SOLAR CONTAINER (recessed frame)

Cod.3.020166

Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).

Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350

Options

SOLAR CONTAINER COMBO (Recessed frame)

Cod.3.028187

Recessed frame for solutions MAGIS COMBO PLUS.

is the first of the main components of MAGIS COMBO PLUS with SOLAR CONTAINER COMBO solutions.

It allows the housing of the main components (except for the heat pump).

It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.

Dimensions (H x W x D) mm 2200 x 950 x 430

Options

Shut off knobs

Cod.3.5324

For wall-hung outdoor boilers.

Options

Shut off knobs with filter

Cod.3.015854

For wall-hung boilers.  

Options

Solar connection kit for MAGIS HERCULES

Cod.3.023339

To be installaed inside of MAGIS HERCULES ErP.

Options

Solar kit

Cod.3.024719

Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).

Options

Solar kit for OMNISTOR

Cod.3.029723

Composed of: aesthetic cover frame, plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, connection insulated pipes.   

Options

Solar kit for SUPER TRIO

Cod.3.030482

Solar kit composed by: plate heat exchanger, single solar
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).

Options

Solar kit for SUPER TRIO TOP

Cod.3.031189

Solar kit for SUPER TRIO TOP.

Options

Solar kit for TRIO PACK ELETRIC

Cod.3.031603

Composed of: plate heat exchanger, single solar pump
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)

Options

Vertical buffer tank with capacity of 50 litres

Cod.3.027539

 
 
 

Options

Vertical inertial storage tank 75 litre

Cod.3.027288

Wall-hung (with bracket option kit) or floor-standing installation.

Options

Wall mounting brackets for external unit

Cod.3.022154

For outdoor unit of VICTRIX HYBRID.

Options

Wall mounting brackets for external unit

Cod.3.034758

For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PROMAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.

 

Options

ZENITAIR MONO

Cod.3.030601

Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 

Options

kit containing bottom guard for condensing boilers

Cod.3.027341

For wall-hung condensing boilers.

Options

2-way group valve kit

Cod.3.028507

Composed of automatic valve with thermoelectric head and holder to balance the plant load losses.
 
 

Options

3-way group valve kit

Cod.3.028508

Composed of three-way diverter valve with thermoelectric head, by-pass tube and holder to balance plant load losses.
 
 

Options

90° bended duct for HYDRO IN 200

Cod.3.029856

Kit for recessed installation in false ceiling with intake and airflow at the bottom.

Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.

 

 
 

Options

90° bended duct for HYDRO IN 400

Cod.3.029857

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 

Options

90° bended duct for HYDRO IN 600

Cod.3.029858

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 

Options

90° bended duct for HYDRO IN 800

Cod.3.029859

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 

Options

90° bended duct for HYDRO IN 1000

Cod.3.029860

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 

Options

Air flow aluminum grill with curved profile for HYDRO IN 200

Cod.3.029891

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
 
 
 
 

Options

Air flow aluminum grill with curved profile for HYDRO IN 400

Cod.3.029892

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 

Options

Air flow aluminum grill with curved profile for HYDRO IN 600

Cod.3.029893

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 

Options

Air flow aluminum grill with curved profile for HYDRO IN 800

Cod.3.029894

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 

Options

Air flow aluminum grill with curved profile for HYDRO IN 1000

Cod.3.029895

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
 
 
 
 

Options

Air flow aluminum grill with straight profile for HYDRO IN 200

Cod.3.029861

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing

In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 

Options

Air flow aluminum grill with straight profile for HYDRO IN 400

Cod.3.029862

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 

Options

Air flow aluminum grill with straight profile for HYDRO IN 600

Cod.3.029863

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 

Options

Air flow aluminum grill with straight profile for HYDRO IN 600

Cod.3.029864

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 

Options

Air flow aluminum grill with straight profile for HYDRO IN 1000

Cod.3.029865

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
 
 
 
 

Options

Air intake aluminum grill with curved profile for HYDRO IN 200

Cod.3.029871

Kit for recessed installation in false ceiling with intake and airflow at the bottomIn
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 

Options

Air intake aluminum grill with curved profile for HYDRO IN 400

Cod.3.029872

Kit for recessed installation in false ceiling with intake and airflow at the bottom.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 

Options

Air intake aluminum grill with curved profile for HYDRO IN 600

Cod.3.029873

Kit for recessed installation in false ceiling with intake and airflow at the bottom
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 

Options

Air intake aluminum grill with curved profile for HYDRO IN 800

Cod.3.029874

Kit for recessed installation in false ceiling with intake and airflow at the bottomIn aluminum.
The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 

Options

Air intake aluminum grill with curved profile for HYDRO IN 1000

Cod.3.029875

Kit for recessed installation in false ceiling with intake and airflow at the bottomIn aluminum.
The curved profile completely masks the interior providing more elegance to the application.
 
 
 
 

Options

Air intake aluminum grill with straight profile for HYDRO IN 200

Cod.3.029866

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
 
 
 
 
 

Options

Air intake aluminum grill with straight profile for HYDRO IN 400

Cod.3.029867

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
 
 
 
 
 

Options

Air intake aluminum grill with straight profile for HYDRO IN 600

Cod.3.029868

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.

 
 
 
 
 

Options

Air intake aluminum grill with straight profile for HYDRO IN 600

Cod.3.029869

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.

 
 
 
 
 

Options

Air intake aluminum grill with straight profile for HYDRO IN 1000

Cod.3.029870

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
 
 
 
 
 

Options

Air intake suction duct for HYDRO IN 200

Cod.3.029846

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
 
 
 
 

Options

Air intake suction duct for HYDRO IN 400

Cod.3.029847

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom

 
 
 
 

Options

Air intake suction duct for HYDRO IN 600

Cod.3.029848

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom.
 
 
 
 

Options

Air intake suction duct for HYDRO IN 800

Cod.3.029849

Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
 
 
 
 

Options

Air intake suction duct for HYDRO IN 1000

Cod.3.029850

Kit for recessed installation in false ceiling with bottom air intake and horizontal and with intake and airflow at the bottom
 
 
 
 

Options

Casing cover panel with intake air grill for HYDRO IN 200

Cod.3.029881

Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 772 x 9 mm
 
 
 
 

Options

Casing cover panel with intake air grill for HYDRO IN 400

Cod.3.029882

Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
 
 
 
 

Options

Casing cover panel with intake air grill for HYDRO IN 600

Cod.3.029883

Kit for wall built-in installation.
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1172 x 9 mm.
 
 
 
 

Options

Casing cover panel with intake air grill for HYDRO IN 800

Cod.3.029884

Kit for wall built-in installation.
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1372 x 9 mm.
 
 
 
 

Options

Casing cover panel with intake air grill for HYDRO IN 1000

Cod.3.029885

Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1572 x 9 mm
 
 
 
 

Options

Ceiling casing cover panel with accessible air grill for HYDRO IN 600

Cod.3.029888

Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1172 x 9 mm
 
 
 
 

Options

Ceiling casing cover panel with accessible air grill for HYDRO IN 800

Cod.3.029889

Kit for ceiling built-in installation.
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1372 x 9 mm.
 
 
 
 

Options

Ceiling casing cover panel with accessible air grill for HYDRO IN 1000

Cod.3.029890

Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1572 x 9 mm
 
 
 
 

Options

Ceiling casing cover panel with accessible air grill for HYDRO IN 2000

Cod.3.029886

Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 772 x 9 mm
 
 
 

Options

Ceiling casing cover panel with accessible air grill for HYDRO IN 4000

Cod.3.029887

Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
 
 
 
 

Options

Connection cable to shift water connections from left to right

Cod.3.029834

to be used in case of reversibility of the hydraulic pipe connections on the right side, rotating the battery 180°
 
 
 
 

Options

Connection kit for HYDRO 3/4 left exit

Cod.3.029520

To be used in case of left side piping.
Arrangement box recessed for pipes is needed.
 
 

Options

HYDRO 3 V2

Cod.3.033625

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

Options

HYDRO IN 200

Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO 4 V2

Cod.3.033626

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

Options

HYDRO FS 200

Cod.3.028500

Floor standing hydronic fancoil 
 
 
 

Options

HYDRO FS 400

Cod.3.028501

Floor standing hydronic fancoil
 

Options

HYDRO FS 600

Cod.3.028502

Floor standing hydronic fancoil 
 
 

Options

HYDRO FS 800

Cod.3.028503

Floor standing hydronic fancoil 
 
 

Options

HYDRO FS 1000

Cod.3.028505

Floor standing hydronic fancoil 
 

Options

HYDRO IN 400

Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 600

Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 800

Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

HYDRO IN 1000

Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 

Options

Sheet metal casing for HYDRO IN 200

Cod.3.029876

Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 715 x 142 mm.
 
 
 

Options

Sheet metal casing for HYDRO IN 400

Cod.3.029877

Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 915 x 142 mm
 
 
 
 

Options

Sheet metal casing for HYDRO IN 600

Cod.3.029878

Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the ceiling in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1115 x 142 mm.
 
 
 

Options

Sheet metal casing for HYDRO IN 800

Cod.3.029879

Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1315 x 142 mm.
 
 
 

Options

Sheet metal casing for HYDRO IN 1000

Cod.3.029880

Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1515 x 142 mm.
 
 
 
 

Options

Sheet metal feet kit

Cod.3.028506

Ideal to cover pipes from the floor.
 
 
 

Options

Variable lenght air flow duct for HYDRO IN 200

Cod.3.029851

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 

Options

Variable lenght air flow duct for HYDRO IN 400

Cod.3.029852

Kit for ceiling built-in and for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 

Options

Variable lenght air flow duct for HYDRO IN 600

Cod.3.029853

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 

Options

Variable lenght air flow duct for HYDRO IN 800

Cod.3.029854

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 

Options

Variable lenght air flow duct for HYDRO IN 1000

Cod.3.029855

Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwingAdjustable to adapt to the installation.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
 
 
 
 

Options

Adapter kit VICTRIX PRO 35/55/60/68/80 V2

Cod.3.023966

for replacement of VICTRIX 50 and 75 versions in single wall unit
configuration

Options

Anti freeze protection kit -15 °C  VICTRIX PRO V2

Cod.3.034125

Usable in outdoor installations for minimum temperature as low as -15 °C.

Options

Condensate discharge pump kit

Cod.3.020002

For single VICTRIX PRO V2

To be used in case of opposite slope between siphon and discharge
It can only be installed inside the building and outside the appliance

Options

Condensate neutralizer kit

Cod.3.019857

Necessary to neutralize the acidity of the condensation. Inclusive of granulate.

Options

Condensate neutralizer kit for cascade installation

Cod.3.019464

Necessary to neutralize the acidity of the condensation.
Inclusive of granulate.

Options

Condensate neutralizer kit until 80 kW

Cod.3.033687

Necessary to neutralize the acidity of the condensation. Inclusive of granulate.

Options

Condensate neutralizer until 180 kW

Cod.3.033688

Necessary to neutralize the acidity of the condensation. Inclusive of granulate.

Options

Condensate neutralizer until 1500 kW

Cod.3.023662

necessary to neutralize the acidity of the condensation. Inclusive of
granulate.

Options

Cover kit IPX5D

Cod.3.033670

for VICTRIX PRO 35/55/60/68/80 V2

Options

Cover kit IPX5D

Cod.3.033671

for VICTRIX PRO 100/120 V2

Options

Cover kit IPX5D

Cod.3.033672

for VICTRIX PRO 150 V2

Options

Cover kit IPX5D

Cod.3.033689

For VICTRIX PRO 180 V2

Options

Dirt separator kit for VICTRIX PRO 35/55/60/68/80 V2 in cascade

Cod.3.033674

The kit includes connection manifolds and support

Options

Dirt separator kit for single installation

Cod.3.033673

For installation both on right and left side

Options

Granulate for condensate neutralizer VICTRIX PRO V2

Cod.3.034920

For condensate neutralizer until 180 kW

Options

Granulate kit for condensate neutralizer (25 kg)

Cod.3.023663

Complete recharge for condensate neutralizer kit until 1500 kW

Options

Hydraulic manifold kit DN 100 for 2 VICTRIX PRO 100/120/150 V2 in cascade

Cod.3.033667

kit includes a 2 way interception valve, a 3-way interception valve and a
non-return valve for each generator.
Insulation as standard

Options

Hydraulic manifold kit DN 100 for 2 VICTRIX PRO 180 V2 in cascade

Cod.3.034938

Kit to connect 2 VICTRIX PRO 180 V2 in cascade installation; it includes a 2 way interception valve, a 3-way interception valve and a non-return valve for each generator.
Insulation as standard.

Options

Hydraulic manifold kit DN 100 for additional VICTRIX PRO 100/120/150 V2 in cascade

Cod.3.033668

in combination with kit 3.033667 serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve.
Insulation as standard

Options

Hydraulic manifold kit DN 100 for additional VICTRIX PRO 180 V2 in cascade

Cod.3.034939

in combination with kit 3.034938 it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard

Options

Hydraulic manifold kit G 2 ½” for 2 VICTRIX PRO 35/55/60/68/80 V2 in cascade

Cod.3.032338

includes a 2-way valves, a 3-way interception valve and a non-return valve
for each generator.
Insulation as standard.

Options

Hydraulic manifold kit G 2 ½” for additional VICTRIX PRO 35/55/60/68/80 V2 in cascade

Cod.3.033669

in combination with kit 3.032338, it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard

Options

Hydraulic manifold kit for VICTRIX PRO 35/55/60/68/80 V2

Cod.3.023951

Specially sized for large thermal systems with high water content. Equipped with sludge collection filter on the return pipe.
Insulation as standard.

Options

Hydraulic manifold kit for VICTRIX PRO 100/120/150 /180V2

Cod.3.023952

Specially sized for large thermal systems with high water content.
Equipped with sludge collection filter on the return pipe.
Insulation as standard

Options

Hydraulic manifold with safety kit for VICTRIX PRO V2 cabinet

Cod.3.033681

The kit includes hydraulic manifold DN 100, safety kit and condensate discharge
manifold DN 50. The installer has to realise gas manifold based on design. 

Options

Hydraulic separator for 100 kW installations

Cod.3.020839

Separator with G 2 ½" threaded connectors.
Insulation as standard.

Options

Hydraulic separator for 200 kW installations

Cod.3.021377

Separator with G 2 ½" threaded connectors.
Insulation as standard.

Options

Hydraulic separator for 350 kW installations

Cod.3.023965

Separator with threaded connectors - DN 100.
Insulation as standard.

Options

Hydraulic separator for 400 kW installations

Cod.3.021378

Separator with G 2 ½" threaded connectors on boiler side - DN 100 on system side.
Insulation as standard.

Options

Hydraulic separator for 600 kW installations

Cod.3.023962

Separator with threaded connectors - DN 100.
Insulation as standard.

Options

Hydraulic separator from ARES Tec 150 kW to ARES Tec 350 kW

Cod.3.023659

To be mainly used when the pump is independently dimensioned by the designer.

Options

Hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW

Cod.3.023660

To be mainly used when the pump is independently dimensioned by the designer.

Options

IPX4D protection box kit for cascade safety kit

Cod.3.024038

Options

IPX4D protection box kit for single boiler safety kit VICTRIX PRO V2

Cod.3.024028

Options

Magnetic dirt separator kit for VICTRIX PRO 100/120/150/180 V2 in cascade

Cod.3.033675

 The kit includes connection manifolds and support.

Options

Outdoor casing for safety kit and hydraulic separator from ARES Tec 150 kW to ARES Tec 350 kW

Cod.3.023670

In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.

Options

Outdoor casing for safety kit and hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW

Cod.3.023671

In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.

Options

Outdoor casing for safety kit and plate heat exchanger from ARES Tec 150 kW to 350 kW

Cod.3.023672

In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.

Options

Outdoor casing for safety kit and plate heat exchanger from ARES Tec 440 kW to 900 kW

Cod.3.023673

In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.

Options

Plate heat exchanger kit for cascade installation on the right side of VICTRIX PRO 35/55/60/68/80 V2

Cod.3.033678

The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel.

Options

Plate heat exchanger kit for cascade installation on the right side of VICTRIX PRO 100/120/150/180 V2

Cod.3.033679

The kit includes connecting pipes, air vent, discharge tap, filling taps and connection to expansion vessel

Options

Plate heat exchanger kit for single installation on the right side of VICTRIX PRO 35/55/80 V2

Cod.3.033676

The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel

Options

Plate heat exchanger kit for single installation on the right side of VICTRIX PRO 100/120/150/180 V2

Cod.3.033677

The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel 

Options

Probe kit for PT 1000 solar collector

Cod.3.019374

Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit

Options

Safety kit DN 100 for VICTRIX PRO 100/120/150/180 V2 in cascade

Cod.3.023961

the kit includes thermometer, thermometer holder, lock, thermostat with
manual reset, connection tap for pressure gauge, manual reset pressure
switch, gas intercepting valve trap, expansion vessel connection and
pressure switch for minimum pressure. Insulation as standard

Options

Safety kit complete with pump and hydraulic separator for ARES 900 Tec

Cod.3.023649

The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Safety kit complete with pump and hydraulic separator for ARES Tec 200/250

Cod.3.023646

The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Safety kit complete with pump and hydraulic separator for ARES Tec 200/250

Cod.3.023645

The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Safety kit complete with pump and hydraulic separator for ARES Tec 300/350 kW

Cod.3.023647

The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Safety kit complete with pump and hydraulic separator from ARES Tec 440 kW to ARES Tec 770 kW

Cod.3.023648

The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Safety kit complete with pump and plate heat exchanger for ARES 770 Tec

Cod.3.023654

Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.

Options

Safety kit complete with pump and plate heat exchanger for ARES 900 Tec

Cod.3.023655

Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.

Options

Safety kit complete with pump and plate heat exchanger for ARES Tec 150/200

Cod.3.023650

Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.

Options

Safety kit complete with pump and plate heat exchanger for ARES Tec 250/350 kW

Cod.3.023651

Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.

Options

Safety kit complete with pump and plate heat exchanger for ARES Tec 440/550 kW

Cod.3.023652

Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.

Options

Safety kit complete with pump and plate heat exchanger for ARES 660 Tec

Cod.3.023653

Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.

Options

Safety kit single boiler VICTRIX PRO V2

Cod.3.023949

The kit includes thermometer, thermometer holder, lock, thermostat with manual reset, connection tap for pressure gauge, manual reset pressure switch, gas intercepting valve trap, expansion vessel connection and pressure switch for minimum pressure. Insulation as standard.

Options

Safety kit with filter for ARES 900 Tec - ARES PRO 600

Cod.3.023658

The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.

Options

Safety kit with filter for ARES PRO 150÷230

Cod.3.028336

The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.

Options

Safety kit with filter for ARES PRO 300÷500

Cod.3.028337

The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.

Options

Safety kit with filter from ARES Tec 150 kW to ARES Tec 350 kW

Cod.3.023656

To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Safety kit with filter from ARES Tec 440 kW to ARES Tec 770 kW

Cod.3.023657

To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.

Options

Solar collector probe

Cod.3.025467

To be used to manage the solar system coupled to thermal plants using the cascade and zone regulator.

Options

Storage tank probe kit

Cod.3.015268

Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit

Options

Three-way valve kit connection to a separate storage tank VICTRIX PRO V2

Cod.3.023950

The kit includes the storage tank probe. The power supply is 230 Vac.
Insulation as standard.

Options

VICTRIX PRO V2 Cabinet kit

Cod.3.033680

it can be installed outdoor.
It includes 4 support feet that ensure stable installation and its handling by
forklift truck or transpallet to be positioned below the cabinet frame.
Alternatively, you can move the cabinet by means of 4 eyebolts in the upper
part.
The cabinet has a door that can be opened by 180 inclusive of lock.

Options

“Free standing” support frame kit VICTRIX PRO 35/55/60/68/80 V2

Cod.3.032347

Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building.

Options

“Free standing” support frame kit VICTRIX PRO 100/120/150 V2

Cod.3.033686

Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building

Options

All-purpose connection kit for wall-hung combi boilers

Cod.3.011667

For wall-hung combi boilers and also for wall-hung with built-in storage tank.

Options

Anti-scale kit

Cod.3.016305

Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.

Options

Anti-scale kit

Cod.3.013499

For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24

Options

Clock kit for Recirculation

Cod.3.015431

To be used to manage the recirculation pump.

Options

Connection kit for EOLO Extra 24 kW

Cod.3.019335

Options

Connection kit for MAIOR EOLO and MINI EOLO 28

Cod.3.021453

Options

Connection kit for NIKE Mini 28 kW Special

Cod.3.016671

Options

Connection kit for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS

Cod.3.015229

for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS   

Options

D.H.W. expansion vessel for AVIO/ZEUS kW

Cod.3.017744

Options

DIM 2 ZONES ErP

Cod.3.025607

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.

Options

DIM 3 ZONES ErP

Cod.3.025608

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.

Options

DIM BASIC ErP

Cod.3.025606

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.

Options

DIM H-2LT ErP

Cod.3.025610

Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.

Options

DIM H-LT ErP

Cod.3.025609

Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.

Options

Recirculation kit

Cod.3.015380

Domestic hot water pump included.
Available for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24.

Options

Recirculation kit for VICTRIX Zeus

Cod.3.012944

Only probe pipe, not pump included.
Available for VICTRIX Zeus.

Options

Shut off knobs with filter

Cod.3.015854

For wall-hung boilers.  

Options

Shut-off knobs

Cod.3.014948

For DIM ErP

 

Options

Solar valve

Cod.3.018911

Allows the connection between combi boiler and solar system.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO and NIKE/EOLO Star.

Options

Wall mounting brackets for external unit

Cod.3.034758

For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PROMAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.