Wide range of original kits to complete the installation of Immergas appliances.
Modulating low consumption pumps.
For VICTRIX SUPERIOR.
Modulating low consumption pumps.
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12
Dimensions (H x W x P) 220 x 350 x 230 mm.
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
For TRIO PACK ELECTRIC system ELECTRIC.
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
for plants with MAGIS M.
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.
for replacement of VICTRIX 50 and 75 versions in single wall unit
configuration
Power supply 230 or 400 Vac.
Power supply 230 or 400 Vac.
Modulating low consumption pump.
Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Usable in outdoor installations for minimum temperature as low as -15 °C.
Until -15 °C
Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
For HERCULES SOLAR
To be installed inside the casing.
indoor only
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
For MAGIS HERCULES ErP.
Only for internal installation of MAGIS VICTRIX
(for external temperatures from 0 °C to -13 °C).
For SOLARSMART.
For MAGIS M
For external installations, in partially protected places
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT
Aestethics frame (250 mm height, 407 mm depth) that covers connections zone and the main option kits
for VICTRIX SUPERIOR
For VICTRIX ZEUS 25-32.
to be installed in CONTAINER or DOMUS CONTAINER
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
To be used to manage the recirculation pump.
Suitable to extend external unit antifreeze protection up to -15 °C.
For floor standing boilers: compact condensate drain pump kit.
For wall-hung boilers: compact condensate drain pump kit.
For single VICTRIX PRO V2
To be used in case of opposite slope between siphon and discharge
It can only be installed inside the building and outside the appliance
For external installations, in partially protected places
necessary to neutralize the acidity of the condensation. Inclusive of
granulate.
For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
for MAGIS HERCULES PRO 4-6-9
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
for MAGIS HERCULES PRO 12-14-16
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
for an easy connection of the refrigerant circuit, even
in the case of pipes coming out from the wall on the
internal unit
For connection R32 toward the lower part of the Container
To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall
Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.
for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
For the installation of heating only boilers.
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
For MAGIS M4 and 6
For MAGIS M8/12/14/16/18/22/26/30
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120 V2
for VICTRIX PRO 150 V2
For VICTRIX PRO 180 V2
For "B23" configuration.
For external installations, in partially protected places
For partially protected area installation
For VICTRIX ZEUS SUPERIOR
pump not included
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
The kit includes connection manifolds and support
For installation both on right and left side
Kit to be used without system manager controller.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO 5-8
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES MINI HYDRO 5-8
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.
For 2 direct zones (only heating)
Double electronic anode kit for UB INOX 200 V2/UB INOX SOLAR 200 V2 and HERCULES SOLAR
For condensate neutralizer until 180 kW
Complete recharge for condensate neutralizer kit until 1500 kW
Modulating low consumption pump.
Suitable to install it under external unit it is necessary adapter kit code 3.030915
kit includes a 2 way interception valve, a 3-way interception valve and a
non-return valve for each generator.
Insulation as standard
in combination with kit 3.033667 serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve.
Insulation as standard
in combination with kit 3.034938 it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard
includes a 2-way valves, a 3-way interception valve and a non-return valve
for each generator.
Insulation as standard.
in combination with kit 3.032338, it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard
Specially sized for large thermal systems with high water content.
Equipped with sludge collection filter on the return pipe.
Insulation as standard
The kit includes hydraulic manifold DN 100, safety kit and condensate discharge
manifold DN 50. The installer has to realise gas manifold based on design.
To be mainly used when the pump is independently dimensioned by the designer.
To be mainly used when the pump is independently dimensioned by the designer.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
For internal installation
Modulating low consumption pump.
For MAGIS HERCULES PRO MINI
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
The kit includes connection manifolds and support.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel.
The kit includes connecting pipes, air vent, discharge tap, filling taps and connection to expansion vessel
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel
To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.
Setted at 6 bar and 94 °C.
Connection ¾". 3 bar setting.
For SOLARSMART.
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Only probe pipe.
Only probe pipe.
Only probe pipe.
Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
To be installed inside the MAGIS HERCULES PRO internal unit casing
To be installed inside the MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO internal unit casing
It's possible install this kit inside MAGIS HERCULES.
For 2 UB INOX 120 V2 or 2 UB INOX 200 V2 in parallel.
for MAGIS HERCULES PRO MINI
To connect gas fittings to the rear wall
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Recessed frame for solutions MAGIS COMBO PLUS.
is the first of the main components of MAGIS COMBO PLUS with SOLAR CONTAINER COMBO solutions.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 430
the kit includes thermometer, thermometer holder, lock, thermostat with
manual reset, connection tap for pressure gauge, manual reset pressure
switch, gas intercepting valve trap, expansion vessel connection and
pressure switch for minimum pressure. Insulation as standard
For wall-hung outdoor boilers.
For wall-hung boilers.
Shut off knobs with filters
1" connections (for zones 2 and 3, only); standard for zone 1.
For DIM ErP
For HERCULES SOLAR 26 ErP
For alignment of solar circuit in template.
To be installaed inside of MAGIS HERCULES ErP.
For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO
Composed by: plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, shut off knobs, connection pipes, mixing valve, 18 litre solar expansion vessel, temperature probes (for collectors and storage tank).
For MAGIS HERCULES PRO.
Composed by: plate heat exchanger, single solar pump
station (with low consumption circulation pump), solar
central unit, connection pipes,18 litre solar expansion vessel,
temperature probes (for collectors and storage tank).
N.B.: For solar panel and other solar accessories see the
solar catalogue.
Including pipes and fittings for connection in template.
Including pipes and fittings for connection in template.
Including pipes and fittings for connection in template.
It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.
Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
it can be installed outdoor.
It includes 4 support feet that ensure stable installation and its handling by
forklift truck or transpallet to be positioned below the cabinet frame.
Alternatively, you can move the cabinet by means of 4 eyebolts in the upper
part.
The cabinet has a door that can be opened by 180 inclusive of lock.
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
For outdoor unit of VICTRIX HYBRID.
For external installations, in partially protected places
USB key included
Gateway and USB key included
For wall-hung condensing boilers.
Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building.
Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building
