options

    Distribution manifold kit for 2 mixed temperature zones

    Cod.3.021528

    Only in combination with system controller (3.021522).
    The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
    Wall-hung or recessed installation. Low consumption pumps.

    Documentation
    options

    Distribution manifold kit for 1 direct and 2 mixed temperature zones

    Cod.3.021527

    Only in combination with system controller (3.021522).
    The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
    Wall-hung or recessed installation. Low consumption pumps.

    Documentation
    options

    Vertical buffer tank with capacity of 50 litres

    Cod.3.027539

    Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.

     
     

    Documentation
    options

    Vertical inertial storage tank 75 litre

    Cod.3.027288

    Wall-hung (with bracket option kit) or floor-standing installation.

    Documentation
    options

    Bracket kit for wall mounting 75 inertial storage tank

    Cod.3.027290

    Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
     

    Documentation
    options

    OMNISTOR 300

    Cod.3.027910

    The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
    The storage tanks are equipped with:
    • 1 stainless steel coils water/water heat exchanger with oversized coil
    • 2 probe-supports and NTC probe for Immergas heat pump connection
    • Thermometer
    • Double magnesium anode
    • Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
    • Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
    • Pre-arranged to double electronic anode (option) code 3.025003
     
    Ideal for connection to heat pumps.

    options

    OMNISTOR 500

    Cod.3.027911

    The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
    The storage tanks are equipped with:
    • 1 stainless steel coils water/water heat exchanger with oversized coil
    • 2 probe-supports and NTC probe for Immergas heat pump connection
    • Thermometer
    • Double magnesium anode
    • Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
    • Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
    • Pre-arranged to double electronic anode (option) code 3.025003
     
    Ideal for connection to heat pumps.

    options

    Double electronic anode kit

    Cod.3.025003

    For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
     
     
     
     

    Documentation
    options

    2 kW electric resistance kit

    Cod.3.020861

    For INOXSTOR 200-300-500 V2, OMNISTOR 300-500, UB 550-750 V2 and UB PRO SOL.

    Power supply 230 or 400 Vac.

    Documentation
    options

    5 kW electric resistance kit

    Cod.3.020862

    For UB 1000-1500 V2, UB 750 V2 and UB PRO SOL.

    Power supply 230 or 400 Vac.

    Documentation
    options

    HYDRO 3 V2

    Cod.3.033625

    Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

    Documentation
    options

    HYDRO 4 V2

    Cod.3.033626

    Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

    Documentation
    options

    HYDRO FS 200

    Cod.3.028500

    Floor standing hydronic fancoil 
     
     
     

    Documentation
    options

    HYDRO FS 400

    Cod.3.028501

    Floor standing hydronic fancoil
     

    Documentation
    options

    HYDRO FS 600

    Cod.3.028502

    Floor standing hydronic fancoil 
     
     

    Documentation
    options

    HYDRO FS 800

    Cod.3.028503

    Floor standing hydronic fancoil 
     
     

    Documentation
    options

    HYDRO FS 1000

    Cod.3.028505

    Floor standing hydronic fancoil 
     

    Documentation
    options

    HYDRO IN 200

    Cod.3.029841

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 400

    Cod.3.029842

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 600

    Cod.3.029843

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 800

    Cod.3.029844

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 1000

    Cod.3.029845

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    Dehumidifier kit

    Cod.3.021529

    Designed for radiant panel cooling systems pairing, the dehumidifier helps keep indoor humidity levels under control, preventing the formation of condensation on walls, floors, or ceilings.
    Only for recessed installation with codes 3.022146 and 3.022147

     

    Documentation
    options

    Dehumidifier front grille kit

    Cod.3.022147

    options

    Dehumidifier back frame kit

    Cod.3.022146

    options

    ZENITAIR MONO

    Cod.3.030601

    Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
    Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
     
     
     
     

    Documentation
    options

    External cover kit with acoustical insulation for ZENITAIR-MONO

    Cod.3.030636

    Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
     
     
     
     

    options

    Connection kit with flexible pipes and shut-off knobs 1" 1/4

    Cod.3.032846

    For MAGIS M8/12/14/16/18/22/26/30

    Documentation
    options

    Integration electric resistance kit 2, 4 or 6 kW for heating system

    Cod.3.021525

    For internal installation

    Documentation
    options

    12 litre system expansion vessel kit

    Cod.3.011679

    For plants with MAGIS M and MAGIS M TOP.

    options

    3-way valve kit

    Cod.3.020632

    Documentation
    thermoregulation

    Remote Control Panel

    Cod.3.030863

    Modulating chronotermostat, remote control with temperature/humidity sensor
     

    Documentation
    thermoregulation

    Remote control kit

    Cod.3.023364

    Class of device V or VI*
    Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
     
    * as standard

    Documentation
    thermoregulation

    System controller

    Cod.3.021522

    Class of device VI* or VIII
    Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
     
    * as standard

    Documentation
    thermoregulation

    System controller expansion kit

    Cod.3.021547

     

     

    Documentation
    thermoregulation

    Temperature/humidity active sensor kit

    Cod.3.021524

    To be used with radiant systems that also work in cooling mode.

    Class of device V or VI*
    Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*

    * as standard

    Documentation
    thermoregulation

    Room hygrostat

    Cod.3.023302

    To be used with radiant systems that also work in cooling mode.

    Documentation
    thermoregulation

    CRONO 7 (weekly digital chronothermostat)

    Cod.3.021622

    ON/OFF room thermostat.

     

    Documentation
    thermoregulation

    CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

    Cod.3.021624

    Wireless ON/OFF room thermostat.

     

     

    Documentation
    thermoregulation

    System controller expansion kit

    Cod.3.029912

     

     

    Documentation
    thermoregulation

    SSR 6 VDC relay kit

    Cod.3.023946

    only for system controller

    thermoregulation

    EMR 12 VDC relay kit

    Cod.3.023945

    only for system controller

    thermoregulation

    External probe

    Cod.3.015266

    For single installation of VICTRIX PRO V2.
    For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

     

    Documentation
    thermoregulation

    NTC contact probe for storage tank

    Cod.3.019375

    Allows to check the DHW temperature of a Storage Tank Unit or puffer.
    Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).

    thermoregulation

    Probe kit for MAGIS M4-30

    Cod.3.033324

    To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.

    options

    Probe kit for PT 1000 solar collector

    Cod.3.019374

    Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)

    options

    Antivibration supports (3 pieces)

    Cod.3.032854

    For MAGIS M