MAGIS PRO 4 V2 with TRIO MONO V2: PRO SYSTEM

Hydronic group for one zone plants and DHW production

Split type heat pump only solution with outdoor unit and indoor hydronic unit

 

The customer service provides
prompt answers within 24 hours.
Ideal for new buildings
Standard thermoregulation
Heating and cooling

Technical data MAGIS PRO 4 V2 with TRIO MONO V2: PRO SYSTEM

Code 3.030606
DHW storage tank (litres) 160
Plant zones (n.) 1 direct

Technical data MAGIS PRO 4 V2 with TRIO MONO V2: PRO SYSTEM

Code 3.030606
DHW storage tank (litres) 160
Plant zones (n.) 1 direct
COMPLETE SYSTEM WITH RENEWABLES
Heating in winter, cooling in summer and domestic hot water all year round. TRIO V2 are the
hydronic units designed to combine different energy sources: renewable and conventional.
GREAT VERSATILITY
Thanks to the versatility of TRIO, professionals can set up different systems, choosing the one that best suits
the building. It is designed to combine with condensing boilers, air-water heat pumps and solar thermal. This
makes possible to create different system solutions and to adapt to the available energy sources.
REDUCED SPACE REQUIREMENTS
The TRIO V2 solutions offer complete units in a limited space: they can be installed in the recessed
frame SOLAR CONTAINER or directly inside the home in the special technical box DOMUS CONTAINER.
STANDARD REMOTE PANEL
TRIO comes with a wide-display panel for easy reading of parameter settings to let you control the system
from a remote location, manage the various configurations of the system and check temperature and
humidity in an area.
 
...

CRONO 7 (weekly digital chronothermostat)   Cod.3.021622

ON/OFF room thermostat.

 

...

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)   Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

...

DOMINUS interface kit   Cod.3.026273

To control heat pumps or hybrid systems and display operation data by means DOMINUS App.
Installed before your modem/router wireless (not supplied by Immergas), you can communicate with the appliance circuit board from any location.
...

External probe   Cod.3.015266

For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

 

...

Low temperature safety thermostat kit   Cod.3.019229

For generators settled up with low temperature

...

Mod-bus temperature and humidity sensor   Cod.3.030992

To be used with radiant systems that also work in cooling mode 

 

...

Remote Control Panel   Cod.3.030863

Modulating chronotermostat, remote control with temperature/humidity sensor
 
...

Room hygrostat   Cod.3.023302

To be used with radiant systems that also work in cooling mode.

...

Storage tank NTC probe   Cod.3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

...

1,5 kW sanitary electric resistance   Cod.3.024897

 
 
 
...

3 kW integration electric resistance kit for MAGIS PRO V2   Cod.3.030991

For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing

...

Aesthetic upper cover DOMUS CONTAINER   Cod.3.027175

 

 

 

...

Anti freeze protection kit -15 °C   Cod.3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

...

Anti scale kit   Cod.3.020628

 

 

 

...

Bottom connection kit   Cod.3.020575

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

...

Bracket kit for wall mounting 75 inertial storage tank   Cod.3.027290

Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
 
...

Buffer tank 15 litres   Cod.3.026304

to be installed in CONTAINER or DOMUS CONTAINER 
...

DHW recirculation kit   Cod.3.026169

pump not included

...

DOMUS CONTAINER (technical box)   Cod.3.022167

Technical box for solutions TRIO V2 and TRIO MONO V2. 
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365

 

 

...

Dehumidifier back frame kit   Cod.3.022146

...

Dehumidifier front grille kit   Cod.3.022147

...

Dehumidifier kit   Cod.3.021529

Only for recessed installation with codes 3.022146 and 3.022147

 

...

External cover kit with acoustical insulation for ZENITAIR-MONO   Cod.3.030636

Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
 
 
 
 
...

HYDRO 3 V2   Cod.3.033625

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
...

HYDRO IN 200   Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO 4 V2   Cod.3.033626

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
...

HYDRO FS 200   Cod.3.028500

Floor standing hydronic fancoil 
 
 
 
...

HYDRO FS 400   Cod.3.028501

Floor standing hydronic fancoil
 
...

HYDRO FS 600   Cod.3.028502

Floor standing hydronic fancoil 
 
 
...

HYDRO FS 800   Cod.3.028503

Floor standing hydronic fancoil 
 
 
...

HYDRO FS 1000   Cod.3.028505

Floor standing hydronic fancoil 
 
...

HYDRO IN 400   Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 600   Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 800   Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 1000   Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 
...

Lateral connection kit   Cod.3.020574

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
...

MAGIS PRO connection kit   Cod.3.026303

For TRIO V2/MONO V2 with MAGIS PRO V2.
includes: hydraulic and gas R410A and R32 fittings, support bracket for indoor unit of MAGIS PRO and NTC probe for storage tank.
...

Rear connection kit   Cod.3.020630

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

...

Recessed buffer tank 50 litres   Cod.3.027709

for installations above or at the side of the container 
...

SOLAR CONTAINER (recessed frame)   Cod.3.020166

Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).

Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350

...

Solar kit   Cod.3.024719

Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
...

Vertical inertial storage tank 75 litre   Cod.3.027288

Wall-hung (with bracket option kit) or floor-standing installation.
...

Wall mounting brackets for external unit   Cod.3.034758

For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PROMAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.

 

...

ZENITAIR MONO   Cod.3.030601

Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 
COMPLETE SYSTEM WITH RENEWABLES
Heating in winter, cooling in summer and domestic hot water all year round. TRIO V2 are the
hydronic units designed to combine different energy sources: renewable and conventional.
GREAT VERSATILITY
Thanks to the versatility of TRIO, professionals can set up different systems, choosing the one that best suits
the building. It is designed to combine with condensing boilers, air-water heat pumps and solar thermal. This
makes possible to create different system solutions and to adapt to the available energy sources.
REDUCED SPACE REQUIREMENTS
The TRIO V2 solutions offer complete units in a limited space: they can be installed in the recessed
frame SOLAR CONTAINER or directly inside the home in the special technical box DOMUS CONTAINER.
STANDARD REMOTE PANEL
TRIO comes with a wide-display panel for easy reading of parameter settings to let you control the system
from a remote location, manage the various configurations of the system and check temperature and
humidity in an area.
 
...

CRONO 7 (weekly digital chronothermostat)   Cod.3.021622

ON/OFF room thermostat.

 

...

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)   Cod.3.021624

Wireless ON/OFF room thermostat.

 

 

...

DOMINUS interface kit   Cod.3.026273

To control heat pumps or hybrid systems and display operation data by means DOMINUS App.
Installed before your modem/router wireless (not supplied by Immergas), you can communicate with the appliance circuit board from any location.
...

External probe   Cod.3.015266

For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

 

...

Low temperature safety thermostat kit   Cod.3.019229

For generators settled up with low temperature

...

Mod-bus temperature and humidity sensor   Cod.3.030992

To be used with radiant systems that also work in cooling mode 

 

...

Remote Control Panel   Cod.3.030863

Modulating chronotermostat, remote control with temperature/humidity sensor
 
...

Room hygrostat   Cod.3.023302

To be used with radiant systems that also work in cooling mode.

...

Storage tank NTC probe   Cod.3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

...

1,5 kW sanitary electric resistance   Cod.3.024897

 
 
 
...

3 kW integration electric resistance kit for MAGIS PRO V2   Cod.3.030991

For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing

...

Aesthetic upper cover DOMUS CONTAINER   Cod.3.027175

 

 

 

...

Anti freeze protection kit -15 °C   Cod.3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

...

Anti scale kit   Cod.3.020628

 

 

 

...

Bottom connection kit   Cod.3.020575

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

...

Bracket kit for wall mounting 75 inertial storage tank   Cod.3.027290

Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
 
...

Buffer tank 15 litres   Cod.3.026304

to be installed in CONTAINER or DOMUS CONTAINER 
...

DHW recirculation kit   Cod.3.026169

pump not included

...

DOMUS CONTAINER (technical box)   Cod.3.022167

Technical box for solutions TRIO V2 and TRIO MONO V2. 
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365

 

 

...

Dehumidifier back frame kit   Cod.3.022146

...

Dehumidifier front grille kit   Cod.3.022147

...

Dehumidifier kit   Cod.3.021529

Only for recessed installation with codes 3.022146 and 3.022147

 

...

External cover kit with acoustical insulation for ZENITAIR-MONO   Cod.3.030636

Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
 
 
 
 
...

HYDRO 3 V2   Cod.3.033625

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
...

HYDRO IN 200   Cod.3.029841

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO 4 V2   Cod.3.033626

Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
...

HYDRO FS 200   Cod.3.028500

Floor standing hydronic fancoil 
 
 
 
...

HYDRO FS 400   Cod.3.028501

Floor standing hydronic fancoil
 
...

HYDRO FS 600   Cod.3.028502

Floor standing hydronic fancoil 
 
 
...

HYDRO FS 800   Cod.3.028503

Floor standing hydronic fancoil 
 
 
...

HYDRO FS 1000   Cod.3.028505

Floor standing hydronic fancoil 
 
...

HYDRO IN 400   Cod.3.029842

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 600   Cod.3.029843

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 800   Cod.3.029844

Wall and ceiling built-in hydronic fancoil
 
 
 
...

HYDRO IN 1000   Cod.3.029845

Wall and ceiling built-in hydronic fancoil
 
 
 
...

Lateral connection kit   Cod.3.020574

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
...

MAGIS PRO connection kit   Cod.3.026303

For TRIO V2/MONO V2 with MAGIS PRO V2.
includes: hydraulic and gas R410A and R32 fittings, support bracket for indoor unit of MAGIS PRO and NTC probe for storage tank.
...

Rear connection kit   Cod.3.020630

To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.

...

Recessed buffer tank 50 litres   Cod.3.027709

for installations above or at the side of the container 
...

SOLAR CONTAINER (recessed frame)   Cod.3.020166

Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).

Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350

...

Solar kit   Cod.3.024719

Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
...

Vertical inertial storage tank 75 litre   Cod.3.027288

Wall-hung (with bracket option kit) or floor-standing installation.
...

Wall mounting brackets for external unit   Cod.3.034758

For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PROMAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.

 

...

ZENITAIR MONO   Cod.3.030601

Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 

Related products

MAGIS PRO 4 V2
Air-water inverter mono-phase heat pump
MAGIS PRO 6 V2
Air-water inverter mono-phase heat pump
MAGIS PRO 9 V2
Air-water inverter mono-phase heat pump

Contacts

Contact us
Customer Care