options

    2 zones kit (1 mixed and 1 direct)

    Cod.3.031695

    For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2, MAGIS HERCULES MINI HYDRO 12 and MAGIS M 12-16 TOP.

    Documentation
    options

    2 direct zones (only heating)

    Cod.3.035334

    For MAGIS HERCULES MINI HYDRO 12, MAGIS PRO 12-14-16 V2 e MAGIS COMBO 12-14-16 V2/ PLUS and MAGIS M 12-16 TOP.

    For 2 direct zones (heating only)

    Documentation
    options

    Shut-off knobs

    Cod.3.014948

    Including 2 knobs.

     

    options

    50 litres vertical buffer tank

    Cod.3.036742

    Suitable for outdoor installation in combination with MAGIS M TOP (dark grey RAL 7030).
     

    Documentation
    options

    Vertical buffer tank with capacity of 50 litres

    Cod.3.027539

    Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.

     
     

    Documentation
    options

    Vertical inertial storage tank 75 litre

    Cod.3.027288

    Wall-hung (with bracket option kit) or floor-standing installation.

    Documentation
    options

    Bracket kit for wall mounting 75 inertial storage tank

    Cod.3.027290

    Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
     

    Documentation
    options

    OMNISTOR 300

    Cod.3.027910

    The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
    The storage tanks are equipped with:
    • 1 stainless steel coils water/water heat exchanger with oversized coil
    • 2 probe-supports and NTC probe for Immergas heat pump connection
    • Thermometer
    • Double magnesium anode
    • Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
    • Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
    • Pre-arranged to double electronic anode (option) code 3.025003
     
    Ideal for connection to heat pumps.

    options

    OMNISTOR 500

    Cod.3.027911

    The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
    The storage tanks are equipped with:
    • 1 stainless steel coils water/water heat exchanger with oversized coil
    • 2 probe-supports and NTC probe for Immergas heat pump connection
    • Thermometer
    • Double magnesium anode
    • Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
    • Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
    • Pre-arranged to double electronic anode (option) code 3.025003
     
    Ideal for connection to heat pumps.

    options

    UB PRO SOL 800

    Cod.3.035550

    Vitrified steel storage tank unit for the production of domestic hot water.

    The UB PRO SOL 800 is equipped with two water/water exchanger coils, one with a larger surface area for heat pump pairing and one for solar thermal systems pairing, and 2 magnesium anodes. The 763-litre storage tank is made up of a special internal porcelain enamel treatment (called vitrification) which gives the product high resistance to water and steam, as well as protecting it from corrosion, and preserves the chemical-physical properties of the domestic hot water. The inspection flange is located in the lower part. The insulation is rigid in polyurethane (PU) with a thickness of 95 mm, removable only if necessary. Optional electrical DHW integrative resistance.

    Dimensions (H x Ø) mm 1985 x 990

    Documentation
    options

    UB PRO SOL 1000

    Cod.3.035551

    Vitrified steel storage tank unit for the production of domestic hot water.

    The UB PRO SOL 1000 is equipped with two water/water exchanger coils, one with a larger surface area for heat pump pairing and one for solar thermal systems pairing, and 2 magnesium anodes. The 856-litre storage tank is made up of a special internal porcelain enamel treatment (called vitrification) which gives the product high resistance to water and steam, as well as protecting it from corrosion, and preserves the chemical-physical properties of the domestic hot water. The inspection flange is located in the lower part. The insulation is rigid in polyurethane (PU) with a thickness of 95 mm, removable only if necessary. Optional electrical DHW integrative resistance.

    Dimensions (H x Ø) mm 2185 x 990

    Documentation
    options

    Double electronic anode kit

    Cod.3.025003

    For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
     
     
     
     

    Documentation
    options

    2 kW electric resistance kit

    Cod.3.020861

    For INOXSTOR 200-300-500 V2, OMNISTOR 300-500, UB 550-750 V2 and UB PRO SOL.

    Power supply 230 or 400 Vac.

    Documentation
    options

    5 kW electric resistance kit

    Cod.3.020862

    For UB 1000-1500 V2, UB 750 V2 and UB PRO SOL.

    Power supply 230 or 400 Vac.

    Documentation
    options

    HYDRO 3 V2

    Cod.3.033625

    Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

    Documentation
    options

    HYDRO 4 V2

    Cod.3.033626

    Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 

    Documentation
    options

    HYDRO FS 200

    Cod.3.028500

    Floor standing hydronic fancoil 
     
     
     

    Documentation
    options

    HYDRO FS 400

    Cod.3.028501

    Floor standing hydronic fancoil
     

    Documentation
    options

    HYDRO FS 600

    Cod.3.028502

    Floor standing hydronic fancoil 
     
     

    Documentation
    options

    HYDRO FS 800

    Cod.3.028503

    Floor standing hydronic fancoil 
     
     

    Documentation
    options

    HYDRO FS 1000

    Cod.3.028505

    Floor standing hydronic fancoil 
     

    Documentation
    options

    HYDRO IN 200

    Cod.3.029841

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 400

    Cod.3.029842

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 600

    Cod.3.029843

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 800

    Cod.3.029844

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    HYDRO IN 1000

    Cod.3.029845

    Wall and ceiling built-in hydronic fancoil
     
     
     

    Documentation
    options

    Dehumidifier kit

    Cod.3.021529

    Designed for radiant panel cooling systems pairing, the dehumidifier helps keep indoor humidity levels under control, preventing the formation of condensation on walls, floors, or ceilings.
    Only for recessed installation with codes 3.022146 and 3.022147

     

    Documentation
    options

    Dehumidifier front grille kit

    Cod.3.022147

    options

    Dehumidifier back frame kit

    Cod.3.022146

    options

    ZENITAIR MONO

    Cod.3.030601

    Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
    Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
     
     
     
     

    Documentation
    options

    External cover kit with acoustical insulation for ZENITAIR-MONO

    Cod.3.030636

    Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
     
     
     
     

    options

    Shut off knobs kit with G 1'' steel flexible pipes

    Cod.3.025954

    For MAGIS M4-6 and MAGIS M TOP.

    Documentation
    options

    Integration electric resistance kit 2, 4 or 6 kW for heating system

    Cod.3.021525

    For internal installation

    Documentation
    options

    12 litre system expansion vessel kit

    Cod.3.011679

    For plants with MAGIS M and MAGIS M TOP.

    options

    3-way valve kit

    Cod.3.020632

    Documentation
    thermoregulation

    Additional zone expansion kit

    Cod.3.035840

    For MAGIS M TOP.

    Allows you to manage auxiliary devices such as: circulation pump, mixing valve, and flow probe.

    Dimensions (H x W x D) 199 x 242 x 49 mm

    Documentation
    thermoregulation

    DEU Management Relay Board Kit

    Cod.3.036231

    For MAGIS M TOP.

    Specific for managing the dehumidifier (and any related valve) in neutral and/or cooled air.

    Documentation
    thermoregulation

    DOMINUS V2 interface kit

    Cod.3.034903

    For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range. 
    Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).

    Documentation
    thermoregulation

    Gateway WI-FI V2

    Cod.3.035537

    To manage MAGIS M TOP remotely both through the dedicated app and the portal. Compatible with major voice assistants (Alexa and Google Home web).

    Dimensions (H x W x D) 87 x 124 x 26 mm

    Documentation
    thermoregulation

    NEXIS - Wired remote additional panel

    Cod.3.035812

    User interface for managing the operation of MAGIS M TOP (black color).
    It is also chronothermostat and a temperature/humidity sensor.

    Dimensions (H x W x D) mm 103 x 147,4 x 20,5

    Documentation
    thermoregulation

    NEXIS - Wired remote additional panel

    Cod.3.035829

    User interface for managing the operation of MAGIS M TOP (white color).
    It is also chronothermostat and a temperature/humidity sensor.

    Dimensions (H x W x D) mm 103 x 147,4 x 20,5

    Documentation
    thermoregulation

    Remote Control Panel

    Cod.3.030863

    Modulating chronotermostat, remote control with temperature/humidity sensor
     

    Documentation
    thermoregulation

    System controller

    Cod.3.021522

    Class of device VI* or VIII
    Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
     
    * as standard

    Documentation
    thermoregulation

    System controller expansion kit

    Cod.3.021547

     

     

    Documentation
    thermoregulation

    Mod-bus temperature and humidity sensor

    Cod.3.030992

    To be used with radiant systems that also work in cooling mode 

     

    Documentation
    thermoregulation

    Room hygrostat

    Cod.3.023302

    To be used with radiant systems that also work in cooling mode.

    Documentation
    thermoregulation

    CRONO 7 (weekly digital chronothermostat)

    Cod.3.021622

    ON/OFF room thermostat.

     

    Documentation
    thermoregulation

    CRONO 7 WIRELESS (wireless weekly digital chronothermostat)

    Cod.3.021624

    Wireless ON/OFF room thermostat.

     

     

    Documentation
    thermoregulation

    SSR 6 VDC relay kit

    Cod.3.023946

    only for system controller

    thermoregulation

    EMR 12 VDC relay kit

    Cod.3.023945

    only for system controller

    thermoregulation

    External probe

    Cod.3.015266

    For single installation of VICTRIX PRO V2.
    For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.

     

    Documentation
    thermoregulation

    NTC contact probe for storage tank

    Cod.3.019375

    Allows to check the DHW temperature of a Storage Tank Unit or puffer.
    Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).

    thermoregulation

    System delivery probe kit

    Cod.3.030913

    Documentation
    options

    Probe kit for PT 1000 solar collector

    Cod.3.019374

    Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)

    options

    Antivibration supports kit

    Cod.3.035580

    For MAGIS M TOP

    Documentation